Pioneer VSX-521-K manual

Pioneer VSX-521-K
8.5 · 9
PDF manual
 · 120 pages
English
manualPioneer VSX-521-K

Basic playback

21
En
English
Français
Español
04
04

Chapter 4:

Basic playback

Playing a source

Here are the basic instructions for playing a source (such as
a DVD disc) with your home theater system.
1
Switch on your system components and receiver.
Start by switching on the playback component (for example a
DVD player), your TV and subwoofer (if you have one), then
the receiver (press RECEIVER).
• Make sure the setup microphone is disconnected.
2
Switch the TV input to the input that connects this
receiver.
For example, if you connected this receiver to the VIDEO
jacks on your TV, make sure that the VIDEO input is now
selected.
3
Press input function buttons to select the input function
you want to play.
• The input of the receiver will switch over, and you will be
able to operate other components using the remote
control. To operate the receiver, first press on
the remote control, then press the appropriate button to
operate.
• The input source can also be selected by using INPUT
SELECT buttons on the remote control, or by
using the front panel INPUT SELECTOR dial. In this case,
the remote control won’t switch operational modes.
If you selected the proper input source and there is still no
sound, select the audio input signal for playback (see
Selecting the audio input signal below).
4
Press AUTO/DIRECT to select ‘AUTO SURROUND’ and
start playback of the source.
If you’re playing a Dolby Digital or DTS surround sound DVD
disc, with a digital audio connection, you should hear
surround sound. If you’re playing a stereo source or if the
connection is an analog audio connection, you will only hear
sound from the front left/right speakers in the default
listening mode.
It is possible to check on the front panel display whether or
not surround sound playback is being performed properly.
When using a surround back speaker, 2D+PLIIx is
displayed when playing Dolby Digital 5.1-channel signals,
and DTS+NEO:6 is displayed when playing DTS 5.1-channel
signals.
When not using a surround back speaker, 2D is displayed
when playing Dolby Digital signals.
If the display does not correspond to the input signal and
listening mode, check the connections and settings.
Note
• You may need to check the digital audio output settings
on your DVD player or digital satellite receiver. It should
be set to output Dolby Digital, DTS and 88.2 kHz/96 kHz
PCM (2 channel) audio, and if there is an MPEG audio
option, set this to convert the MPEG audio to PCM.
• Depending on your DVD player or source discs, you may
only get digital 2 channel stereo and analog sound. In this
case, the receiver must be set to a multichannel listening
mode if you want multichannel surround sound.
5
Use MASTER VOLUME to adjust the volume level.
Turn down the volume of your TV so that all sound is coming
from the speakers connected to this receiver.
Selecting the audio input signal
The audio input signal can be selected for each input source.
Once it is set, the audio input that was selected will be
applied whenever you select the input source using the input
function buttons.
Press SIGNAL SEL to select the audio input signal
corresponding to the source component.
Each press cycles through the following:
H – Selects an HDMI signal. H can be selected for BD,
DVD, DVR/BDR or VIDEO input. For other inputs, H
cannot be selected.
-
When the HDMI option in Setting the Audio options on
page 28 is set to THRU, the sound will be heard through
your TV, not from this receiver.
A – Selects the analog inputs.
C1/O1/O2 – Selects the digital input. The coaxial 1 input
is selected for C1, and the optical 1 or 2 audio input is
selected for O1 or O2.
When H (HDMI) or C1/O1/O2 (digital) is selected and the
selected audio input is not provided, A (analog) is
automatically selected.
Note
VIDEO input is fixed to H (HDMI). It cannot be changed.
•For the TV/SAT input, only A (analog) or C1/O1/O2
(digital) can be selected. However, if the ARC at HDMI
Setup is set to ON, the input is fixed to H (HDMI) and
cannot be changed.
• When set to H (HDMI) or C1/O1/O2 (digital), 2 lights
when a Dolby Digital signal is input, and DTS lights when
a DTS signal is input.
• When the H (HDMI) is selected, the A and DIGITAL
indicators are off (see page 7).
INPUT SELECT
SOURCESLEEP
TV
CONTROL
INPUT
RECEIVER
CH
VOL
RECEIVER
BD DVD TV
DVR/BDR
CD
CD-R
ADAPTER
TUNER
PORTABLE
VIDEO
SIGNAL SELS.RETRIEVER
DTV/TV
ENTER
ADV SURR
AUTO/
DIRECT
MUTE
RETURN
AUDIO
PARAMETER
TUNER EDIT
TOOLS
MASTER
VOLUME
BAND
MENU
TRE
BASS
TOP
MENU
T
U
N
E
T
U
N
E
P
R
E
S
E
T
P
R
E
S
E
T
BD MENU
HOME
MENU
SETUP
ALC/
STANDARD
STEREO
RECEIVER
CH
VOL
DVR/BDR
CD
CD-R
ADAPTER
TUNER
PORTABLE
VIDEO
SIGNAL SELS.RETRIEVER
VSX-521_UCSMXCN_En.book 21 ページ 󲃟󲃝󲃞󲃝年󲃞󲃟月󲃟󲃞日 火曜日 午後󲃟時󲃠5分

View the manual for the Pioneer VSX-521-K here, for free. This manual comes under the category receivers and has been rated by 9 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-521-K or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 4
V
Varga istvánSeptember 2, 2020

Hi, I have a question. I connected the receiver to the TV via HDMI-1, and when I turn off the TV or unplug the receiver, the receiver also turns off and doesn't turn back on unless I reconnect it to the TV. Thank you very much in advance for your response, it's very important.

This message has been automatically translated
A
Alvin BergJanuary 16, 2022

How can I choose between the various sound options, such as concert or rock, using the IR unit or directly on the receiver?

How can I choose between the various sound options, such as concert or rock, using the IR unit or directly on the receiver?
zoom-in
View photo
This message has been automatically translated
J
Jim LowDecember 29, 2022

Does this model have the option of selecting between A or B speakers?

T
TitoFebruary 4, 2024

Where do connect a turntable

Where do connect a turntable
zoom-in
View photo

The Pioneer VSX-521-K is an audio receiver that delivers a RMS rated power of 550 watts. With a Signal-to-Noise Ratio (SNR) of 79 dB, it offers clear and high-quality sound. The Total Harmonic Distortion (THD) is impressively low at 0.05%, ensuring accurate audio reproduction without any noticeable distortion. This receiver has an impedance of 8 Ω, which is a commonly used standard for audio equipment. It supports 5.1 channels, providing an immersive audio experience with multiple speakers for surround sound. In terms of connectivity, the Pioneer VSX-521-K offers various options. It has multichannel audio input and output terminals, allowing for convenient connection to compatible devices. Additionally, it features two digital audio optical inputs and one digital audio coaxial input, enabling the transmission of high-quality digital audio signals. For video connectivity, the receiver is equipped with two component video inputs, four HDMI inputs, and one composite video input. These inputs allow for the integration of video components into the audio setup. The Pioneer VSX-521-K includes one HDMI output, which can be connected to a compatible display device. This output allows for seamless video transmission. Overall, the Pioneer VSX-521-K is a versatile audio receiver with ample power and connectivity options. Its low distortion and high SNR ensure accurate and clear audio reproduction, while the multiple input and output options make it suitable for a variety of audio and video setups.

General
BrandPioneer
ModelVSX-521-K | VSX-521-K
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF)
Audio
RMS rated power550 W
Signal-to-Noise Ratio (SNR)79 dB
Total Harmonic Distortion (THD)0.05 %
Impedance8 Ω
Audio output channels5.1 channels
Frequency range20 - 20000 Hz
Power output per channel (20-20KHz@8 Ohm)- W
Power output per channel (1KHz@6 Ohm)125 W
Receiver type-
Technical details
Audio decodersDolby Digital EX, Dolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD
Product colorBlack
Handheld remote controlYes
Display-
EqualizerYes
Apple docking compatibilityNot supported
AirPlayNo
Inputs
Multichannel audio input typeTerminals
Digital audio optical in2
Digital audio coaxial in1
Component video (YPbPr/YCbCr) in2
HDMI in4
Composite video in1
Outputs
Multichannel audio output typeTerminals
Number of HDMI outputs1
Composite video out1
Headphone outputs2
Headphone connectivity3.5 mm
Ports & interfaces
Connectivity technologyWired
Speakers connectivity type-
Radio
Supported radio bandsAM, FM
AM band range530 - 1700 kHz
FM band range87.5 - 108 MHz
Preset stations quantity30
Video
3DYes
Weight & dimensions
Weight9000 g
Width435 mm
Depth363 mm
Height168 mm
Network
Ethernet LANNo
Wi-FiNo
Power
AC input voltage120 V
AC input frequency60 Hz
Power consumption (typical)415 W
Power consumption (standby)0.4 W
Optical drive
Optical drive includedNo
Storage
Card reader integrated-
Packaging content
ManualYes
Warranty cardYes
User guideYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-521-K below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Pioneer VSX-521-K?

The Pioneer VSX-521-K has a weight of 9000 g.

What is the height of the Pioneer VSX-521-K?

The Pioneer VSX-521-K has a height of 168 mm.

What is the width of the Pioneer VSX-521-K?

The Pioneer VSX-521-K has a width of 435 mm.

What is the depth of the Pioneer VSX-521-K?

The Pioneer VSX-521-K has a depth of 363 mm.

How do I connect my speakers to the Pioneer VSX-521-K receiver?

Make sure you connect the positive and negative terminals of each speaker to the corresponding terminals on the receiver. Remember to match the correct impedance and polarity for optimal sound performance.

How can I set up the auto-calibration feature on the receiver?

To use the auto-calibration feature, make sure you connect the included microphone to the receiver and place it at your listening position. Then, access the receiver's menu and follow the on-screen instructions to run the auto-calibration process, which will optimize the audio settings for your specific room.

How do I adjust the bass and treble settings on the Pioneer VSX-521-K?

To adjust the bass and treble settings, go to the receiver's menu and navigate to the audio settings. From there, you can easily modify the levels of bass and treble to suit your personal preferences.

How can I program the remote control to work with my TV?

To program the remote control to operate your TV, locate the remote's setup button and press it. Then, follow the on-screen instructions to enter the specific code for your TV brand. Once successfully programmed, the remote should control basic functions such as power, volume, and input selection for your TV.

How do I connect external devices, such as a Blu-ray player or game console, to the Pioneer receiver?

Connect the HDMI output of your external device to one of the HDMI inputs on the receiver. Then, using an HDMI cable, connect the HDMI output of the receiver to your TV or video display. Finally, select the appropriate HDMI input on the receiver to enjoy audio and video from your external device.

What is the RMS rated power of Pioneer VSX-521-K?

The RMS rated power of Pioneer VSX-521-K is 550 W. This means that it has a high power output, making it suitable for larger rooms or for those who want a louder audio experience.

What is the Signal-to-Noise Ratio (SNR) of Pioneer VSX-521-K?

The Signal-to-Noise Ratio (SNR) of Pioneer VSX-521-K is 79 dB. A higher SNR indicates that the receiver produces less background noise, resulting in clearer and more accurate audio playback.

What is the Total Harmonic Distortion (THD) of Pioneer VSX-521-K?

The Total Harmonic Distortion (THD) of Pioneer VSX-521-K is 0.05%. This means that the receiver maintains a low distortion level, ensuring that the audio is reproduced with high fidelity and minimal distortion.

What is the Impedance of Pioneer VSX-521-K?

The Impedance of Pioneer VSX-521-K is 8 Ω. This indicates the compatibility of the receiver with various speakers. Most speakers have an 8 Ω impedance rating, so this receiver should work well with a wide range of speakers.

How many audio output channels does Pioneer VSX-521-K have?

Pioneer VSX-521-K has 5.1 audio output channels. This means that it supports surround sound systems with five speakers and one subwoofer, resulting in a more immersive audio experience for the user.

Is the manual of the Pioneer VSX-521-K available in English?

Yes, the manual of the Pioneer VSX-521-K is available in English .

Is your question not listed? Ask your question here

No results