Pioneer VSX-521-K manual

Pioneer VSX-521-K
8.5 · 9
PDF manual
 · 120 pages
English
manualPioneer VSX-521-K
37
Es

English

Français

Español

08
08
Después de utilizar la configuración automática MCACC, el
ajuste de tamaño de altavoz (LARGE o SMALL) es incorrecto.
El ruido de baja frecuencia puede estar provocado por un
aparato de aire acondicionado o un motor. Apague todos los
aparatos en la habitación y vuelva a ejecutar configuración
automática MCACC.
El mando a distancia no funciona.
Sustituya las pilas (consulte la página 9).
Utilícelo en un rango de 7 m, 30º del sensor remoto (consulte
la página 9).
Retire el obstáculo o utilice el mando a distancia desde otra
posición.
Evite exponer el sensor de mando a distancia del panel frontal
a luz directa.
La pantalla se ve oscura o está apagada.
Para regresar al valor por defecto, pulse repetidamente
DIMMER en el mando a distancia.
La pantalla del panel frontal cambia sin motivo aparente a
varias pantallas distintas.
Esto sucede porque la pantalla demo está en funcionamiento.
Para apagar la pantalla demo, pulse cualquier botón a fin de
volver a la pantalla original, o bien ajuste el FL Demo Mode
en OFF (consulte El menú FL Demo Mode en la página 33).
El dispositivo de tecnología inalámbrica Bluetooth no puede
conectarse ni manejarse. El dispositivo de tecnología
inalámbrica Bluetooth no emite sonido o el sonido se
interrumpe.
Compruebe que no haya ningún objeto que emita ondas
electromagnéticas en la banda de 2,4 GHz (horno
microondas, dispositivo inalámbrico LAN o un aparato de
tecnología inalámbrica Bluetooth) cerca de la unidad. Si dicho
objeto está cerca de la unidad, configure la unidad lejos de él.
O deje de utilizar el objeto que emite ondas
electromagnéticas.
Compruebe que el dispositivo de tecnología inalámbrica
Bluetooth no está demasiado lejos de la unidad y que no hay
obstáculos entre el dispositivo de tecnología inalámbrica
Bluetooth y la unidad. Ajuste el dispositivo de tecnología
inalámbrica Bluetooth y la unidad, de modo que la distancia
entre ambos sea inferior a 10 m y no exista ningún obstáculo
entre ellos.
Compruebe que el ADAPTADOR Bluetooth y el ADAPTER
PORT de la unidad estén correctamente conectados.
Puede que el dispositivo de tecnología inalámbrica Bluetooth
no esté ajustado en el modo de comunicación compatible con
la tecnología inalámbrica Bluetooth. Compruebe la
configuración del dispositivo de tecnología inalámbrica
Bluetooth.
Compruebe que el emparejamiento se haya realizado
correctamente. La configuración del emparejamiento se ha
borrado de esta unidad o del dispositivo de tecnología
inalámbrica Bluetooth. Reinicie el emparejamiento.
Compruebe que el perfil sea correcto. Utilice un dispositivo de
tecnología inalámbrica Bluetooth que sea compatible con los
perfiles A2DP y AVRCP.
HDMI
No hay imagen ni sonido.
Si el problema todavía persiste cuando conecte su
componente HDMI directamente al monitor, consulte el
manual del componente o del monitor, o bien póngase en
contacto con el fabricante para obtener asistencia.
No hay imagen.
Las señales de vídeo procedentes del terminal de vídeo
analógico no saldrán por el terminal HDMI. Las señales de
vídeo procedentes del terminal HDMI no saldrán por el
terminal de vídeo analógico. Utilice el mismo tipo de cable
para las conexiones de entrada y de salida.
Dependiendo de la configuración de salida del componente
de origen, es posible que esté reproduciendo un formato de
vídeo que no puede visualizarse. Modifique la configuración
de salida de la fuente o realice la conexión mediante las
tomas de componentes o compuestas.
Este receptor es compatible con HDCP. Compruebe que los
componentes que está conectando también sean
compatibles con HDCP. Si no lo son, conéctelos mediante las
tomas de vídeo de componentes o compuestas.
Según el componente fuente conectado, es posible que no
funcione con este receptor (aunque sea compatible con
HDCP). Si es el caso, use las tomas de vídeo de componentes
o compuestas para la conexión entre la fuente y el receptor.
Si no aparecen imágenes de vídeo en su TV, pruebe a ajustar
la resolución, Deep Color u otros ajustes de su componente.
Para emitir señales en Deep Color, use un cable HDMI (cable
High Speed HDMI
®
) para conectar este receptor a un
componente o televisor con función Deep Color.
La pantalla OSD (menú System Setup, etc.) no aparece en
pantalla.
La información en pantalla (OSD) no aparecerá si ha realizado
la conexión al televisor utilizando la salida HDMI. Al
configurar el sistema, utilice conexiones de componentes o
compuestas.
No hay sonido o éste se detiene de repente.
Compruebe que Audio Parameter esté ajustado a HDMI
AMP/THRU (consulte la página 28).
Si el componente es un dispositivo DVI, utilice una conexión
distinta para el sonido.
Las transmisiones de audio digital en formato HDMI tardan
más tiempo en ser reconocidas. Por esta razón, es posible
que se produzca alguna interrupción de audio al cambiar de
un formato de audio a otro o al iniciar la reproducción.
Si durante la reproduccn se enciende/apaga el dispositivo
conectado al terminal HDMI OUT de este equipo, o se
desconecta/conecta el cable HDMI, podría producirse ruido o
interrupciones de audio.
No es posible un funcionamiento sincronizado utilizando la
función de Control con HDMI.
Compruebe las conexiones HDMI.
El cable puede estar dañado.
Seleccione ON para el ajuste de Control con HDMI, consulte
HDMI Setup en la página 34.
Conecte la alimentación del televisor antes de conectar la
alimentación del receptor.
Ajuste a ON el Control con HDMI del lado del televisor
(consulte las instrucciones de funcionamiento del TV).

Información importante relativa a la conexión

HDMI
Habrá casos en los que no podrá encaminar señales HDMI a
través de este receptor (depende del componente que está
conectando; consulte al fabricante si es compatible con
HDMI).
Si no está recibiendo señales HDMI correctamente a través
de este receptor (desde su componente), realice la siguiente
configuración.
Configuración
Conecte el componente compatible con HDMI directamente
a la pantalla mediante un cable HDMI. Después utilice la
conexión más adecuada (se recomienda una conexión
digital) para enviar audio al receptor. Para obtener más
información sobre las conexiones de audio, consulte las
instrucciones de uso. Al utilizar esta configuración, ponga el
volumen de la pantalla al mínimo.
Nota
• Dependiendo del componente, la salida de audio puede
limitarse al número de canales disponibles de la unidad
de visualización conectada (por ejemplo, la salida de
audio se reduce a 2 canales para un monitor con
limitaciones de audio estéreo).
• Si desea cambiar la fuente de entrada, deberá cambiar
las funciones tanto en el receptor como en la unidad de
pantalla.
• Puesto que el sonido se anula en la pantalla al utilizar la
conexión HDMI, deberá ajustar el volumen en la pantalla
cada vez que cambie las fuentes de entrada.
VSX-521_UCSMXCN_Es.book 37 ページ 󲃟󲃝󲃞󲃝年󲃞󲃟月󲃟󲃞日 火曜日 午後󲃞󲃟時󲃞8分

View the manual for the Pioneer VSX-521-K here, for free. This manual comes under the category receivers and has been rated by 9 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-521-K or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 4
V
Varga istvánSeptember 2, 2020

Hi, I have a question. I connected the receiver to the TV via HDMI-1, and when I turn off the TV or unplug the receiver, the receiver also turns off and doesn't turn back on unless I reconnect it to the TV. Thank you very much in advance for your response, it's very important.

This message has been automatically translated
A
Alvin BergJanuary 16, 2022

How can I choose between the various sound options, such as concert or rock, using the IR unit or directly on the receiver?

How can I choose between the various sound options, such as concert or rock, using the IR unit or directly on the receiver?
zoom-in
View photo
This message has been automatically translated
J
Jim LowDecember 29, 2022

Does this model have the option of selecting between A or B speakers?

T
TitoFebruary 4, 2024

Where do connect a turntable

Where do connect a turntable
zoom-in
View photo

The Pioneer VSX-521-K is an audio receiver that delivers a RMS rated power of 550 watts. With a Signal-to-Noise Ratio (SNR) of 79 dB, it offers clear and high-quality sound. The Total Harmonic Distortion (THD) is impressively low at 0.05%, ensuring accurate audio reproduction without any noticeable distortion. This receiver has an impedance of 8 Ω, which is a commonly used standard for audio equipment. It supports 5.1 channels, providing an immersive audio experience with multiple speakers for surround sound. In terms of connectivity, the Pioneer VSX-521-K offers various options. It has multichannel audio input and output terminals, allowing for convenient connection to compatible devices. Additionally, it features two digital audio optical inputs and one digital audio coaxial input, enabling the transmission of high-quality digital audio signals. For video connectivity, the receiver is equipped with two component video inputs, four HDMI inputs, and one composite video input. These inputs allow for the integration of video components into the audio setup. The Pioneer VSX-521-K includes one HDMI output, which can be connected to a compatible display device. This output allows for seamless video transmission. Overall, the Pioneer VSX-521-K is a versatile audio receiver with ample power and connectivity options. Its low distortion and high SNR ensure accurate and clear audio reproduction, while the multiple input and output options make it suitable for a variety of audio and video setups.

General
BrandPioneer
ModelVSX-521-K | VSX-521-K
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF)
Audio
RMS rated power550 W
Signal-to-Noise Ratio (SNR)79 dB
Total Harmonic Distortion (THD)0.05 %
Impedance8 Ω
Audio output channels5.1 channels
Frequency range20 - 20000 Hz
Power output per channel (20-20KHz@8 Ohm)- W
Power output per channel (1KHz@6 Ohm)125 W
Receiver type-
Technical details
Audio decodersDolby Digital EX, Dolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD
Product colorBlack
Handheld remote controlYes
Display-
EqualizerYes
Apple docking compatibilityNot supported
AirPlayNo
Inputs
Multichannel audio input typeTerminals
Digital audio optical in2
Digital audio coaxial in1
Component video (YPbPr/YCbCr) in2
HDMI in4
Composite video in1
Outputs
Multichannel audio output typeTerminals
Number of HDMI outputs1
Composite video out1
Headphone outputs2
Headphone connectivity3.5 mm
Ports & interfaces
Connectivity technologyWired
Speakers connectivity type-
Radio
Supported radio bandsAM, FM
AM band range530 - 1700 kHz
FM band range87.5 - 108 MHz
Preset stations quantity30
Video
3DYes
Weight & dimensions
Weight9000 g
Width435 mm
Depth363 mm
Height168 mm
Network
Ethernet LANNo
Wi-FiNo
Power
AC input voltage120 V
AC input frequency60 Hz
Power consumption (typical)415 W
Power consumption (standby)0.4 W
Optical drive
Optical drive includedNo
Storage
Card reader integrated-
Packaging content
ManualYes
Warranty cardYes
User guideYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-521-K below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Pioneer VSX-521-K?

The Pioneer VSX-521-K has a weight of 9000 g.

What is the height of the Pioneer VSX-521-K?

The Pioneer VSX-521-K has a height of 168 mm.

What is the width of the Pioneer VSX-521-K?

The Pioneer VSX-521-K has a width of 435 mm.

What is the depth of the Pioneer VSX-521-K?

The Pioneer VSX-521-K has a depth of 363 mm.

How do I connect my speakers to the Pioneer VSX-521-K receiver?

Make sure you connect the positive and negative terminals of each speaker to the corresponding terminals on the receiver. Remember to match the correct impedance and polarity for optimal sound performance.

How can I set up the auto-calibration feature on the receiver?

To use the auto-calibration feature, make sure you connect the included microphone to the receiver and place it at your listening position. Then, access the receiver's menu and follow the on-screen instructions to run the auto-calibration process, which will optimize the audio settings for your specific room.

How do I adjust the bass and treble settings on the Pioneer VSX-521-K?

To adjust the bass and treble settings, go to the receiver's menu and navigate to the audio settings. From there, you can easily modify the levels of bass and treble to suit your personal preferences.

How can I program the remote control to work with my TV?

To program the remote control to operate your TV, locate the remote's setup button and press it. Then, follow the on-screen instructions to enter the specific code for your TV brand. Once successfully programmed, the remote should control basic functions such as power, volume, and input selection for your TV.

How do I connect external devices, such as a Blu-ray player or game console, to the Pioneer receiver?

Connect the HDMI output of your external device to one of the HDMI inputs on the receiver. Then, using an HDMI cable, connect the HDMI output of the receiver to your TV or video display. Finally, select the appropriate HDMI input on the receiver to enjoy audio and video from your external device.

What is the RMS rated power of Pioneer VSX-521-K?

The RMS rated power of Pioneer VSX-521-K is 550 W. This means that it has a high power output, making it suitable for larger rooms or for those who want a louder audio experience.

What is the Signal-to-Noise Ratio (SNR) of Pioneer VSX-521-K?

The Signal-to-Noise Ratio (SNR) of Pioneer VSX-521-K is 79 dB. A higher SNR indicates that the receiver produces less background noise, resulting in clearer and more accurate audio playback.

What is the Total Harmonic Distortion (THD) of Pioneer VSX-521-K?

The Total Harmonic Distortion (THD) of Pioneer VSX-521-K is 0.05%. This means that the receiver maintains a low distortion level, ensuring that the audio is reproduced with high fidelity and minimal distortion.

What is the Impedance of Pioneer VSX-521-K?

The Impedance of Pioneer VSX-521-K is 8 Ω. This indicates the compatibility of the receiver with various speakers. Most speakers have an 8 Ω impedance rating, so this receiver should work well with a wide range of speakers.

How many audio output channels does Pioneer VSX-521-K have?

Pioneer VSX-521-K has 5.1 audio output channels. This means that it supports surround sound systems with five speakers and one subwoofer, resulting in a more immersive audio experience for the user.

Is the manual of the Pioneer VSX-521-K available in English?

Yes, the manual of the Pioneer VSX-521-K is available in English .

Is your question not listed? Ask your question here

No results