Pioneer VSX-521-K manual

Pioneer VSX-521-K
8.5 · 9
PDF manual
 · 120 pages
English
manualPioneer VSX-521-K
08
36
Es
08

Capítulo 8:

Información adicional

Solución de problemas

Un manejo incorrecto a menudo puede confundirse con problemas o un mal funcionamiento. Si cree que este componente tiene algún problema, compruebe los puntos siguientes. Eche un vistazo a los otros componentes y aparatos electrónicos que se están utilizando, ya que en ocasiones el problema puede residir ahí. Si no puede solucionar el problema después de realizar las comprobaciones que se indican a continuación, diríjase al centro de servicio técnico Pioneer autorizado más cercano para que lleve a cabo las reparaciones necesarias.• Si el equipo no funciona de forma normal debido a interferencias externas tales como electricidad estática, desconecte la clavija de alimentación de la toma de corriente y luego vuelva a conectarla para restablecer las condiciones normales de funcionamiento.
General
El equipo no se enciende.
Desconecte la clavija de alimentación de la toma de corriente
y luego vuelva a conectarla.
Asegúrese de que no hay hilos sueltos del cable de los
altavoces tocando el panel posterior. Esto puede provocar que
el receptor se cierre automáticamente.
El receptor se apaga de repente.
Cuando la función Auto Power Down está activa, la
alimentación se apagará automáticamente si el receptor no
ha funcionado durante varias horas. Compruebe la
configuración de la función Auto Power Down (consulte El
menú Auto Power Down en la página 33).
Después de un minuto aproximadamente (no deberá
encender la unidad durante este tiempo), vuelva a encender el
receptor. Si el mensaje persiste, llame a una empresa de
servicio técnico independiente autorizada por Pioneer.
La alimentación se activa o desactiva de repente, o cambia la
entrada de manera inesperada (Cuando el Control con HDMI
está en ON).
Esto sucede con motivo del funcionamiento sincronizado,
debido al Control con función HDMI. Si no se precisa el
funcionamiento sincronizado, ajuste el Control con HDMI a
OFF (consulte HDMI Setup en la página 34).
OVERHEAT aparece en la pantalla y se apaga la
alimentación.
La temperatura en el interior de la unidad ha superado el valor
permisible. Pruebe a mover la unidad para que se ventile
mejor (véase la página 2).
Baje el nivel de volumen.
Aparece TEMP en la pantalla y cae el nivel de volumen.
La temperatura en el interior de la unidad ha superado el valor
permisible. Pruebe a mover la unidad para que se ventile
mejor (véase la página 2).
Baje el nivel de volumen.
No hay emisión de sonido cuando se selecciona una función
de entrada.
Utilice MASTER VOLUME para subir el volumen.
Pulse MUTE en el mando a distancia para desactivar la
silenciación.
Ajuste el SIGNAL SEL a H (HDMI), C1/O1/O2 (digital) o A
(analógico) según el tipo de conexiones realizadas (consulte
la página 21).
Asegúrese de que ha conectado correctamente el
componente (consulte Conexión del equipo en la página 10).
Compruebe la configuración de salida de audio del
componente de origen.
Consulte el manual de instrucciones facilitado con el
componente fuente.
No se emite ninguna imagen cuando se selecciona una
función de entrada.
Asegúrese de que ha conectado correctamente el
componente (consulte Conexión del equipo en la página 10).
Utilice el mismo tipo de cables de vídeo para el componente
fuente y el TV para conectar este receptor (consulte Acerca de
la conexión de salidas de vídeo en la página 13).
Consulte la sección El menú Input Assign en la página 32 para
asegurarse de que ha asignado la entrada correcta.
Se ha seleccionado una entrada de vídeo incorrecta en el
monitor de TV. Consulte el manual de instrucciones
suministrado con el televisor.
El subwoofer no emite sonido.
Asegúrese de que el subwoofer está conectado.
Si el subwoofer dispone de un mando de volumen, asegúrese
de que está ajustado de forma adecuada.
Es posible que la fuente Dolby Digital o DTS que escucha no
tenga un canal LFE.
Cambie la configuración de subwoofer en Ajuste de los
altavoces en la página 30 a YES o PLUS.
Cambie el LFE ATT (LFE Attenuate) de la página 28 a LFEATT 0
o LFEATT 5.
No se emite ningún sonido por los altavoces central o de
sonido envolvente.
Conecte los altavoces de forma adecuada (consulte la
página 11).
Consulte Ajuste de los altavoces en la página 30 para
comprobar los ajustes de los altavoces.
Consulte Nivel de canales en la página 31 para comprobar los
niveles de los altavoces.
La función Phase Control no parece tener un efecto audible.
Si procede, compruebe que el interruptor del filtro de paso
bajo de su subwoofer está apagado o que el corte se ha
definido en el ajuste de frecuencia más alto. Si hay una
opción PHASE en el subwoofer, ajústela en 0º (o según el
subwoofer, en el ajuste que piense que tiene el mejor efecto
general sobre el sonido).
Asegúrese de que el ajuste de distancia del altavoz es
correcto para todos los altavoces (consulte Distancia de los
altavoces en la página 32).
Las emisiones de radio contienen una cantidad considerable
de ruido.
Conecte la antena (página 17) y ajuste la posición para
obtener la mejor recepción.
Aleje los cables sueltos de los hilos y terminales de la antena.
Extienda al máximo la antena de cable FM, oriéntela
correctamente y fíjela a una pared (o conecte una antena FM
exterior).
Conecte una antena de AM interior o exterior adicional
(página 18).
Apague el equipo que provoca interferencias o aléjelo del
receptor (o sitúe las antenas más lejos del equipo que está
provocando ruidos).
No es posible seleccionar emisoras de radiodifusión
automáticamente.
Conecte una antena exterior (consulte la página 18).
Se escucha ruido durante la reproducción de una platina de
casete.
Aleje la platina de casete del receptor hasta que el ruido
desaparezca.
Cuando se reproduce software con DTS, no se emite ningún
sonido ni ningún ruido.
Asegúrese de que los ajustes en el reproductor sean
correctos y/o que la salida de señal DTS esté activada.
Consulte el manual de instrucciones suministrado con el
reproductor de DVD.
Parece haber un retardo de tiempo entre los altavoces y la
salida del subwoofer.
Consulte Configuración automática para sonido envolvente
(MCACC) en la página 19 para configurar el sistema de nuevo
utilizando MCACC (esto compensará automáticamente un
retardo en la salida del subwoofer).
VSX-521_UCSMXCN_Es.book 36 ページ 󲃟󲃝󲃞󲃝年󲃞󲃟月󲃟󲃞日 火曜日 午後󲃞󲃟時󲃞8分

View the manual for the Pioneer VSX-521-K here, for free. This manual comes under the category receivers and has been rated by 9 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-521-K or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 4
V
Varga istvánSeptember 2, 2020

Hi, I have a question. I connected the receiver to the TV via HDMI-1, and when I turn off the TV or unplug the receiver, the receiver also turns off and doesn't turn back on unless I reconnect it to the TV. Thank you very much in advance for your response, it's very important.

This message has been automatically translated
A
Alvin BergJanuary 16, 2022

How can I choose between the various sound options, such as concert or rock, using the IR unit or directly on the receiver?

How can I choose between the various sound options, such as concert or rock, using the IR unit or directly on the receiver?
zoom-in
View photo
This message has been automatically translated
J
Jim LowDecember 29, 2022

Does this model have the option of selecting between A or B speakers?

T
TitoFebruary 4, 2024

Where do connect a turntable

Where do connect a turntable
zoom-in
View photo

The Pioneer VSX-521-K is an audio receiver that delivers a RMS rated power of 550 watts. With a Signal-to-Noise Ratio (SNR) of 79 dB, it offers clear and high-quality sound. The Total Harmonic Distortion (THD) is impressively low at 0.05%, ensuring accurate audio reproduction without any noticeable distortion. This receiver has an impedance of 8 Ω, which is a commonly used standard for audio equipment. It supports 5.1 channels, providing an immersive audio experience with multiple speakers for surround sound. In terms of connectivity, the Pioneer VSX-521-K offers various options. It has multichannel audio input and output terminals, allowing for convenient connection to compatible devices. Additionally, it features two digital audio optical inputs and one digital audio coaxial input, enabling the transmission of high-quality digital audio signals. For video connectivity, the receiver is equipped with two component video inputs, four HDMI inputs, and one composite video input. These inputs allow for the integration of video components into the audio setup. The Pioneer VSX-521-K includes one HDMI output, which can be connected to a compatible display device. This output allows for seamless video transmission. Overall, the Pioneer VSX-521-K is a versatile audio receiver with ample power and connectivity options. Its low distortion and high SNR ensure accurate and clear audio reproduction, while the multiple input and output options make it suitable for a variety of audio and video setups.

General
BrandPioneer
ModelVSX-521-K | VSX-521-K
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF)
Audio
RMS rated power550 W
Signal-to-Noise Ratio (SNR)79 dB
Total Harmonic Distortion (THD)0.05 %
Impedance8 Ω
Audio output channels5.1 channels
Frequency range20 - 20000 Hz
Power output per channel (20-20KHz@8 Ohm)- W
Power output per channel (1KHz@6 Ohm)125 W
Receiver type-
Technical details
Audio decodersDolby Digital EX, Dolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD
Product colorBlack
Handheld remote controlYes
Display-
EqualizerYes
Apple docking compatibilityNot supported
AirPlayNo
Inputs
Multichannel audio input typeTerminals
Digital audio optical in2
Digital audio coaxial in1
Component video (YPbPr/YCbCr) in2
HDMI in4
Composite video in1
Outputs
Multichannel audio output typeTerminals
Number of HDMI outputs1
Composite video out1
Headphone outputs2
Headphone connectivity3.5 mm
Ports & interfaces
Connectivity technologyWired
Speakers connectivity type-
Radio
Supported radio bandsAM, FM
AM band range530 - 1700 kHz
FM band range87.5 - 108 MHz
Preset stations quantity30
Video
3DYes
Weight & dimensions
Weight9000 g
Width435 mm
Depth363 mm
Height168 mm
Network
Ethernet LANNo
Wi-FiNo
Power
AC input voltage120 V
AC input frequency60 Hz
Power consumption (typical)415 W
Power consumption (standby)0.4 W
Optical drive
Optical drive includedNo
Storage
Card reader integrated-
Packaging content
ManualYes
Warranty cardYes
User guideYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-521-K below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Pioneer VSX-521-K?

The Pioneer VSX-521-K has a weight of 9000 g.

What is the height of the Pioneer VSX-521-K?

The Pioneer VSX-521-K has a height of 168 mm.

What is the width of the Pioneer VSX-521-K?

The Pioneer VSX-521-K has a width of 435 mm.

What is the depth of the Pioneer VSX-521-K?

The Pioneer VSX-521-K has a depth of 363 mm.

How do I connect my speakers to the Pioneer VSX-521-K receiver?

Make sure you connect the positive and negative terminals of each speaker to the corresponding terminals on the receiver. Remember to match the correct impedance and polarity for optimal sound performance.

How can I set up the auto-calibration feature on the receiver?

To use the auto-calibration feature, make sure you connect the included microphone to the receiver and place it at your listening position. Then, access the receiver's menu and follow the on-screen instructions to run the auto-calibration process, which will optimize the audio settings for your specific room.

How do I adjust the bass and treble settings on the Pioneer VSX-521-K?

To adjust the bass and treble settings, go to the receiver's menu and navigate to the audio settings. From there, you can easily modify the levels of bass and treble to suit your personal preferences.

How can I program the remote control to work with my TV?

To program the remote control to operate your TV, locate the remote's setup button and press it. Then, follow the on-screen instructions to enter the specific code for your TV brand. Once successfully programmed, the remote should control basic functions such as power, volume, and input selection for your TV.

How do I connect external devices, such as a Blu-ray player or game console, to the Pioneer receiver?

Connect the HDMI output of your external device to one of the HDMI inputs on the receiver. Then, using an HDMI cable, connect the HDMI output of the receiver to your TV or video display. Finally, select the appropriate HDMI input on the receiver to enjoy audio and video from your external device.

What is the RMS rated power of Pioneer VSX-521-K?

The RMS rated power of Pioneer VSX-521-K is 550 W. This means that it has a high power output, making it suitable for larger rooms or for those who want a louder audio experience.

What is the Signal-to-Noise Ratio (SNR) of Pioneer VSX-521-K?

The Signal-to-Noise Ratio (SNR) of Pioneer VSX-521-K is 79 dB. A higher SNR indicates that the receiver produces less background noise, resulting in clearer and more accurate audio playback.

What is the Total Harmonic Distortion (THD) of Pioneer VSX-521-K?

The Total Harmonic Distortion (THD) of Pioneer VSX-521-K is 0.05%. This means that the receiver maintains a low distortion level, ensuring that the audio is reproduced with high fidelity and minimal distortion.

What is the Impedance of Pioneer VSX-521-K?

The Impedance of Pioneer VSX-521-K is 8 Ω. This indicates the compatibility of the receiver with various speakers. Most speakers have an 8 Ω impedance rating, so this receiver should work well with a wide range of speakers.

How many audio output channels does Pioneer VSX-521-K have?

Pioneer VSX-521-K has 5.1 audio output channels. This means that it supports surround sound systems with five speakers and one subwoofer, resulting in a more immersive audio experience for the user.

Is the manual of the Pioneer VSX-521-K available in English?

Yes, the manual of the Pioneer VSX-521-K is available in English .

Is your question not listed? Ask your question here

No results