Pioneer VSX-519V manual

Pioneer VSX-519V
8.6 · 8
PDF manual
 · 136 pages
English
manualPioneer VSX-519V

Additional information 10

45
En

English

Français

Italiano

Español

Nederlands

Deutsch

Resetting the main unit

Use this procedure to reset all the receiver’s
settings to the factory default. Use the front
panel controls to do this.
1 Switch the receiver into standby.
2 While holding down the
BAND
button,
press and hold the
STANDBY/ON button
for about two seconds.
3 When you see RESET? appear in the
display, press the ‘AUTO SURROUND/
STREAM DIRECT’ button.
OK? shows in the display.
4 Press ‘
STEREO/A.L.C.
’ to confirm.
OK appears in the display to indicate that the
receiver has been reset to the factory default
settings.

Specifications

Audio section

FTC power output
. . . . . . . . . . . . . . . . . . . . . . . . . . . 65 W + 65 W
(STEREO, 20 Hz to 20 kHz, 8
Ω
, 0.2 %)
Rated power output (Front, Center, Surround)
. . . . . . . . 125 W per channel (1 kHz, 6
Ω
, 1 %)
Maximum power output (Front, Center, Surround)
. . . . . . . 150 W per channel (1 kHz, 6
Ω
, 10 %)
Total Harmonic Distortion
. . . . . . 0.06 % (20 Hz to 20 kHz, 8
Ω
, 85 W/ch)
Guaranteed speaker impedance
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Ω
to 16
Ω
Input (Sensitivity/Impedance)
LINE . . . . . . . . . . . . . . . . . . . . . . .200 mV/47 k
Ω
Output (Level/Impedance)
REC . . . . . . . . . . . . . . . . . . . . . . 200 mV/330
Ω
ZONE 2 . . . . . . . . . . . . . . . . . . . . .200 mV/1 kΩ
Signal-to-Noise Ratio
(IHF, short circuited, A network)
LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 dB

Video Section

Signal level
Composite . . . . . . . . . . . . . . . . . . 1 Vp-p (75
Ω)
Component Video. . . . . . . . . Y: 1.0 Vp-p (75
Ω)
PB, PR: 0.7 Vp-p (75
Ω)
Corresponding maximum resolution
Component Video. . . . . . . . . . . .1080p (1125p)

Tuner Section

FM Frequency Range . . . . 87.5 MHz to 108 MHz
Antenna Input . . . . . . . . . . . . . 75 Ω unbalanced
AM Frequency Range
9 kHz step . . . . . . . . . . . . .531 kHz to 1602 kHz
10 kHz step . . . . . . . . . . . .530 kHz to 1700 kHz
Antenna. . . . . . . . . . . . . . . . . . . . . . Loop antenna

Digital I/O

HDMI terminal . . . . . . . . . . . . . . 19-pin (Not DVI)
HDMI output type . . . . . . . . . . . . . . . 5 V, 100 mA

Integrated control section

Control (IR) terminal . . 3.5 Mini-jack (MONO)
IR signal. . . . . . . High Active (High Level : 2.0 V)
10_additional_info.fm 45 ページ 2009年3月23日 月曜日 午後5時39

View the manual for the Pioneer VSX-519V here, for free. This manual comes under the category receivers and has been rated by 8 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-519V or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 4
H
HernanJanuary 17, 2021

I changed the transistors that burned out, but on the amplification board a 4.7 ohm resistor burns out and it turns off.

This message has been automatically translated
E
ErycJune 10, 2021

Hello, good afternoon. I bought the Pioneer amplifier, model VSX-519V, but I noticed that it overheats a lot and does not have a fan. Are these amplifiers like that? I have my doubts because, since I have never bought one before, I do not know how they actually come.

Hello, good afternoon. I bought the Pioneer amplifier, model VSX-519V, but I noticed that it overheats a lot and does not hav...
zoom-in
View photo
This message has been automatically translated
J
John HenneburyDecember 16, 2023

How to repair/fix an error code on a Pioneer Audio/Video Multi-Channel Receiver VSX-519V ?

R
rodneyApril 29, 2024

phono button at back of Amplifier

The Pioneer VSX-519V is a receiver that offers a range of features for audio enthusiasts. With its powerful amplification and advanced audio processing capabilities, this receiver delivers high-quality sound for an enhanced listening experience. The VSX-519V supports various audio formats, including Dolby Digital and DTS, allowing for immersive surround sound. It also offers multiple audio input options, including analog and digital connections, providing flexibility for connecting different audio sources. Equipped with a user-friendly interface, the receiver allows for easy navigation and control. The included remote control provides convenient access to the receiver's functions and settings, making it easy to customize the sound output according to personal preferences. In terms of connectivity, the VSX-519V is equipped with multiple HDMI inputs, which allow for seamless integration with other devices such as gaming consoles or Blu-ray players. It also includes a subwoofer output, enabling users to add an additional level of bass to their audio setup. The design of the VSX-519V is sleek and modern, fitting seamlessly into any home theater setup. Its build quality ensures durability and longevity, making it a reliable choice for long-term use. Overall, the Pioneer VSX-519V is a versatile receiver that offers impressive audio performance and a range of features suitable for various audio setups.

General
BrandPioneer
ModelVSX-519V
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-519V below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Can you guide me on how to connect my Pioneer VSX-519V receiver to my TV?

To connect your receiver to your TV, use an HDMI cable. Connect one end of the cable to the HDMI Out port on the receiver and the other end to the HDMI Input port on your TV. Make sure the TV is set to the correct input source.

How can I set up the speakers properly with my Pioneer VSX-519V receiver?

Start by connecting each speaker wire to the corresponding speaker terminal on the back of the receiver. Ensure the positive and negative wires are correctly aligned. Then, using the receiver's speaker setup menu, configure the speaker size, distance, and channel level settings to optimize the audio output for your specific setup.

How do I calibrate the audio settings on my Pioneer VSX-519V receiver?

To calibrate the audio settings, access the receiver's MCACC (Multi-Channel Acoustic Calibration System) function. Place the supplied microphone at your listening position, follow the on-screen instructions, and allow the receiver to analyze the room's acoustics. This will ensure an optimal audio experience tailored to your environment.

I want to connect external devices to my receiver. Can you explain how to do that?

Certainly! To connect external devices, locate the corresponding input ports on the back of the receiver. Use the appropriate cables for each device, such as HDMI, RCA, or optical cables, and connect them to the relevant input ports on the receiver. Ensure that the input source on the receiver matches the connected device to enjoy seamless audio and video playback.

How can I troubleshoot audio issues on my Pioneer VSX-519V receiver?

If you're experiencing audio issues, try the following steps: 1) Verify that all speaker connections are secure and properly inserted. 2) Ensure the receiver is set to the correct audio input source. 3) Check your source device's audio settings for compatibility with the receiver. 4) If using HDMI, confirm that both the receiver and TV support the same audio format. 5) Reset the receiver to factory settings if necessary by referring to the receiver's menu options. If the issue persists, it may be beneficial to consult a professional for further assistance.

Is the manual of the Pioneer VSX-519V available in English?

Yes, the manual of the Pioneer VSX-519V is available in English .

Is your question not listed? Ask your question here

No results