Pioneer VSX-519V manual

Pioneer VSX-519V
8.6 · 8
PDF manual
 · 136 pages
English
manualPioneer VSX-519V

Connecting up 03

19
En

English

Français

Italiano

Español

Nederlands

Deutsch

Connecting an IR receiver

If you keep your stereo components in a closed
cabinet or shelving unit, or you wish to use the
sub zone remote control in another zone, you
can use an optional IR receiver (such as a Niles
or Xantech unit) to control your system instead
of the remote sensor on the front panel of this
receiver.
1
1 Connect the IR receiver sensor to the
IR IN
jack on the rear of this receiver.
For more infor mation on connecting the IR
receiver, see the Installation Instructions for
the IR Receiver.

Plugging in the receiver

Only plug in after you have connected all your
components to this receiver, including the
speakers.
Caution
Handle the power cord by the plug part.
Do not pull out the plug by tugging the
cord, and never touch the power cord
when your hands are wet, as this could
cause a short circuit or electric shock. Do
not place the unit, a piece of furniture, or
other object on the power cord or pinch
the cord in any other way. Never make a
knot in the cord or tie it with other cables.
The power cords shoul
d
be routed so that
they are not likely to be stepped on. A
damaged power cord can cause a fire or
give you an electric shock. Check the
power cord once in a while. If you find it
damaged, ask your nearest Pioneer
authorized independent service company
for a replacement.
Do not use any power cord other than the
one supplied with this unit.
•Do not use the supplied power cord for
any purpose other than that described
below.
•The receiver should be disconnected by
removing the mains plug from the wall
socket when not in regu
l
ar use, e.g., when
on vacation.
1 Plug the supplied power cord into the
AC
IN
socket on the back of the receiver.
2 Plug the other end into a power outlet.
Note
1• Remote operation may not be possible if direct light from a strong fluorescent lamp is shining on the IR receiver remote
sensor window.
• Note that other manufacturers may not use the IR terminology. Refer to the manual that came with your component to check
for IR compatibility.
• If using two remote controls (at the same time), the IR receiver’s remote sensor takes priority over the remote sensor on the
front panel.
VSX_519V_RLF.book 19 ページ 2009年1月22日 木曜日 午後2時20分

View the manual for the Pioneer VSX-519V here, for free. This manual comes under the category receivers and has been rated by 8 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-519V or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 4
H
HernanJanuary 17, 2021

I changed the transistors that burned out, but on the amplification board a 4.7 ohm resistor burns out and it turns off.

This message has been automatically translated
E
ErycJune 10, 2021

Hello, good afternoon. I bought the Pioneer amplifier, model VSX-519V, but I noticed that it overheats a lot and does not have a fan. Are these amplifiers like that? I have my doubts because, since I have never bought one before, I do not know how they actually come.

Hello, good afternoon. I bought the Pioneer amplifier, model VSX-519V, but I noticed that it overheats a lot and does not hav...
zoom-in
View photo
This message has been automatically translated
J
John HenneburyDecember 16, 2023

How to repair/fix an error code on a Pioneer Audio/Video Multi-Channel Receiver VSX-519V ?

R
rodneyApril 29, 2024

phono button at back of Amplifier

The Pioneer VSX-519V is a receiver that offers a range of features for audio enthusiasts. With its powerful amplification and advanced audio processing capabilities, this receiver delivers high-quality sound for an enhanced listening experience. The VSX-519V supports various audio formats, including Dolby Digital and DTS, allowing for immersive surround sound. It also offers multiple audio input options, including analog and digital connections, providing flexibility for connecting different audio sources. Equipped with a user-friendly interface, the receiver allows for easy navigation and control. The included remote control provides convenient access to the receiver's functions and settings, making it easy to customize the sound output according to personal preferences. In terms of connectivity, the VSX-519V is equipped with multiple HDMI inputs, which allow for seamless integration with other devices such as gaming consoles or Blu-ray players. It also includes a subwoofer output, enabling users to add an additional level of bass to their audio setup. The design of the VSX-519V is sleek and modern, fitting seamlessly into any home theater setup. Its build quality ensures durability and longevity, making it a reliable choice for long-term use. Overall, the Pioneer VSX-519V is a versatile receiver that offers impressive audio performance and a range of features suitable for various audio setups.

General
BrandPioneer
ModelVSX-519V
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-519V below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Can you guide me on how to connect my Pioneer VSX-519V receiver to my TV?

To connect your receiver to your TV, use an HDMI cable. Connect one end of the cable to the HDMI Out port on the receiver and the other end to the HDMI Input port on your TV. Make sure the TV is set to the correct input source.

How can I set up the speakers properly with my Pioneer VSX-519V receiver?

Start by connecting each speaker wire to the corresponding speaker terminal on the back of the receiver. Ensure the positive and negative wires are correctly aligned. Then, using the receiver's speaker setup menu, configure the speaker size, distance, and channel level settings to optimize the audio output for your specific setup.

How do I calibrate the audio settings on my Pioneer VSX-519V receiver?

To calibrate the audio settings, access the receiver's MCACC (Multi-Channel Acoustic Calibration System) function. Place the supplied microphone at your listening position, follow the on-screen instructions, and allow the receiver to analyze the room's acoustics. This will ensure an optimal audio experience tailored to your environment.

I want to connect external devices to my receiver. Can you explain how to do that?

Certainly! To connect external devices, locate the corresponding input ports on the back of the receiver. Use the appropriate cables for each device, such as HDMI, RCA, or optical cables, and connect them to the relevant input ports on the receiver. Ensure that the input source on the receiver matches the connected device to enjoy seamless audio and video playback.

How can I troubleshoot audio issues on my Pioneer VSX-519V receiver?

If you're experiencing audio issues, try the following steps: 1) Verify that all speaker connections are secure and properly inserted. 2) Ensure the receiver is set to the correct audio input source. 3) Check your source device's audio settings for compatibility with the receiver. 4) If using HDMI, confirm that both the receiver and TV support the same audio format. 5) Reset the receiver to factory settings if necessary by referring to the receiver's menu options. If the issue persists, it may be beneficial to consult a professional for further assistance.

Is the manual of the Pioneer VSX-519V available in English?

Yes, the manual of the Pioneer VSX-519V is available in English .

Is your question not listed? Ask your question here

No results