View the manual for the Pioneer VSX-517-K here, for free. This manual comes under the category receivers and has been rated by 3 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-517-K or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-517-K below.
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.
Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.
To troubleshoot if you can't hear any sound from your Pioneer VSX-517-K receiver, follow these steps: 1. Check the speaker connections: Ensure that the speakers are properly connected to the receiver. Refer to page 19 of the manual for instructions on how to connect the speakers correctly. 2. Verify the speaker settings: Go to the "Speaker setting" section on page 43 of the manual and check the speaker settings. Make sure the correct speaker configuration is selected. 3. Adjust the speaker levels: Refer to the "Channel level" section on page 44 of the manual. Use this feature to check and adjust the speaker levels to ensure balanced audio output. 4. Troubleshoot surround back speakers (if applicable): If you are not getting sound from the surround back speakers, refer to the "Speaker setting" section on page 43. Verify the surround back speaker settings and adjust them if necessary. 5. Check subwoofer settings: If there is no sound from the subwoofer, ensure that it is switched on and the volume knob is turned up. Additionally, check the "Speaker setting" section on page 43 to ensure the subwoofer setting is correctly configured. 6. Verify the phase control feature: If the "PHASE CONTROL" feature doesn't seem to have an audible effect, check the lowpass filter switch on your subwoofer and set it to the appropriate setting. Also, ensure that the speaker distance setting is correct for all speakers. By following these troubleshooting steps, you should be able to identify and resolve the issue of not hearing any sound from your Pioneer VSX-517-K receiver.
If you are unable to select the multichannel analog inputs on your Pioneer VSX-517-K receiver, follow these steps to troubleshoot the issue: 1. Check the connection: Ensure that you have properly connected the device with multichannel analog outputs, such as a decoder or DVD player, to the receiver. Refer to page 14 of the manual for instructions on connecting the multichannel analog outputs. 2. Select the correct input: On the remote control, press the "DVD 5.1" button (SHIFT + DVD) or the "DVD 5.1" button on the front panel to select the multichannel analog inputs. If you have the VSX-817 model, make sure you have set the playback source to the proper output setting and press the "DVD/LD" button followed by the "SIGNAL SELECT" button on the front panel. 3. Verify the indicator lights: When the multichannel analog inputs are selected, the "ANALOG" indicator should light up, and "DVD 5.1ch" should be displayed on the receiver's screen. By following these steps, you should be able to troubleshoot and resolve the issue of not being able to select the multichannel analog inputs on your Pioneer VSX-517-K receiver.
If the front audio inputs on your Pioneer VSX-517-K receiver are not working, you can try the following steps to troubleshoot the issue: 1. Check the connection: Ensure that the audio source is properly connected to the front audio inputs on the receiver. Make sure the cables are securely plugged into the correct input jacks. 2. Verify the input selection: On the receiver's front panel or remote control, select the appropriate input source for the front audio inputs. For example, press the "F.AUDIO" button on the remote control or "FRONT AUDIO" on the front panel to select the front audio input source. 3. Adjust the volume and settings: Make sure the volume level is turned up and not muted. Also, check the audio settings on the receiver to ensure that the correct audio input settings are selected. 4. Test with another audio source: Try connecting a different audio source to the front audio inputs to see if the issue persists. This will help determine if the problem lies with the audio source or the receiver. By following these troubleshooting steps, you should be able to identify and resolve the issue with the front audio inputs on your Pioneer VSX-517-K receiver.
If you are experiencing playback issues from the multichannel inputs on your Pioneer VSX-517-K receiver, you can follow these steps to troubleshoot the problem: 1. Check the connection: Ensure that the device with multichannel analog outputs, such as a decoder or DVD player, is properly connected to the multichannel inputs on the receiver. Refer to page 14 of the manual for instructions on connecting the multichannel analog outputs. 2. Select the correct input: On the remote control, press the "DVD 5.1" button (SHIFT + DVD) or the "DVD 5.1" button on the front panel to select the multichannel analog inputs. Make sure the receiver is set to the appropriate input source. 3. Verify the audio settings: Check the audio settings on the receiver to ensure that the correct audio input settings are selected for the multichannel inputs. Refer to the "Speaker setting" section on page 43 of the manual for guidance. 4. Test with another device: Try connecting a different device with multichannel analog outputs to the receiver and see if the playback issues persist. This will help determine if the problem lies with the original device or the receiver. By following these troubleshooting steps, you should be able to identify and resolve the playback issues from the multichannel inputs on your Pioneer VSX-517-K receiver.
If the sound features/modes are not working properly during playback from the multichannel inputs on your Pioneer VSX-517-K receiver, you can troubleshoot the issue by following these steps: 1. Check the input source: Ensure that the audio source connected to the multichannel inputs supports the specific sound features/modes you are trying to use. Some audio sources may not be compatible with certain sound modes. 2. Verify the audio settings: Check the audio settings on the receiver to ensure that the correct sound mode is selected for the multichannel inputs. Use the remote control or front panel buttons to navigate through the audio settings menu and make the necessary adjustments. 3. Test with different sound modes: Try selecting different sound modes available on the receiver to see if the issue persists. This will help determine if the problem is specific to a particular sound mode or if it affects all sound modes. 4. Reset the receiver: If the above steps do not resolve the issue, you can try resetting the receiver to its factory default settings. Refer to the "Resetting the system" section in the manual for instructions on how to perform a reset. By following these troubleshooting steps, you should be able to identify and resolve any issues with the sound features/modes during playback from the multichannel inputs on your Pioneer VSX-517-K receiver.
Yes, the manual of the Pioneer VSX-517-K is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Pioneer and is the answer not in the manual?
Question and answer
Number of questions: 0