Pioneer VSX-321-K-P manual

Pioneer VSX-321-K-P
7.5 · 14
PDF manual
 · 64 pages
English
manualPioneer VSX-321-K-P

Additional information

29
En
07
07
English
Français
Español
HDMI
No picture or sound.
If the problem still persists when connecting your HDMI
component directly to your monitor, please consult the
component or monitor manual or contact the manufacturer
for support.
No picture.
Video signals that are input from the analog video terminal
will not output from the HDMI terminal. Signals that are input
from the HDMI terminal will not output from the analog video
terminal. Be consistent with the type of cable between input
and output.
Depending in the output settings of the source component, it
may be outputting a video format that can’t be displayed.
Change the output settings of the source, or connect using
the composite jacks.
This receiver is HDCP-compatible. Check that the components
you are connecting are also HDCP-compatible. If they are not,
please connect them using the composite video jacks.
Depending on the connected source component, it’s possible
that it will not work with this receiver (even if it is HDCP-
compatible). In this case, connect using the composite video
jacks between source and receiver.
If video images do not appear on your TV, try adjusting the
resolution, Deep Color or other setting for your component.
To output signals in Deep Color, use an HDMI cable (High
Speed HDMI
®
Cable) to connect this receiver to a component
or TV with the Deep Color feature.
No sound, or sound suddenly ceases.
Check that the Audio Parameter setting is set to HDMI AMP/
THRU (refer to page 23).
If the component is a DVI device, use a separate connection
for the audio.
HDMI format digital audio transmissions require a longer time
to be recognized. Due to this, interruption in the audio may
occur when switching between audio formats or beginning
playback.
Turning on/off the device connected to this unit’s HDMI OUT
terminal during playback, or disconnecting/connecting the
HDMI cable during playback, may cause noise or interrupted
audio.

Important information regarding the HDMI

connection

There are cases where you may not be able to route HDMI
signals through this receiver (this depends on the HDMI
equipped component you are connecting-check with the
manufacturer for HDMI compatibility information).
If you aren’t receiving HDMI signals properly through this
receiver (from your component), please try the following
configuration when connecting up.
Configuration
Connect your HDMI-equipped component directly to the
display using an HDMI cable. Then use the most convenient
connection (digital is recommended) for sending audio to the
receiver. See the operating instructions for more on audio
connections. Set the display volume to minimum when using
this configuration.
Note
Depending on the component, audio output may be
limited to the number of channels available from the
connected display unit (for example audio output is
reduced to 2 channels for a monitor with stereo audio
limitations).
• If you want to switch the input source, you’ll have to
switch functions on both the receiver and your display
unit.
Since the sound is muted on the display when using the
HDMI connection, you must adjust the volume on the
display every time you switch input sources.

Resetting the main unit

Use this procedure to reset all the receiver’s settings to the
factory default. Use the front panel controls to do this.
1 Switch the receiver into standby.
2 While holding down BAND, press and hold
STANDBY/ON
for about two seconds.
3 When you see RESET? appear in the display, press AUTO
SURROUND/STREAM DIRECT.
OK? shows in the display.
4 Press ALC/STANDARD SURR to confirm.
OK appears in the display to indicate that the receiver has
been reset to the factory default settings.
Important
If the ARC function is ON, you may not be able to initialize
the unit. If this happens, turn OFF the ARC function or
turn OFF all the connected device before turning OFF
(STANDBY) the power for this unit, and initialize after the
HDMI indicator goes out.

Cleaning the unit

Use a polishing cloth or dry cloth to wipe off dust and dirt.
When the surface is dirty, wipe with a soft cloth dipped in
some neutral cleanser diluted five or six times with water,
and wrung out well, and then wipe again with a dry cloth.
Do not use furniture wax or cleansers.
• Never use thinners, benzine, insecticide sprays or other
chemicals on or near this unit, since these will corrode
the surface.
07_additional_info.fm 29 ページ 2011年7月22日 金曜日 午後6時8分

View the manual for the Pioneer VSX-321-K-P here, for free. This manual comes under the category home cinema sets and has been rated by 14 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-321-K-P or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 5
H
HenrikDecember 13, 2020

Hello! I have obtained a Pioneer VSX-321-K-P home cinema set. However, it is missing the AC input cable. How can I solve this? Thank you in advance, Best regards, Henrik.

This message has been automatically translated
J
JOHANDEL July 21, 2022

I want to connect the audio cable to use it with my mobile device, but I can't find how or how to synchronize it.

I want to connect the audio cable to use it with my mobile device, but I can't find how or how to synchronize it.
zoom-in
View photo
This message has been automatically translated
P
Prasanthi SanthoshJanuary 28, 2021

Does pioneer vsx 321 kp supports 4k?(amazon fire stick)

W
William PorterApril 12, 2023

Show set up satilight tv hook up

J
Jimmie Duncan December 31, 2022

How can I get the user manual the full manual please.

The Pioneer VSX-321-K-P is a home cinema set that offers an immersive audio and video experience. It is designed with functionality and ease of use in mind. This home cinema set features a 5.1 channel surround sound system, allowing for a dynamic soundstage that enhances the audio quality of movies and music. The included speakers deliver clear and precise sound, providing a balanced audio experience. The VSX-321-K-P supports various audio formats, including Dolby Digital and DTS-HD, which ensure compatibility with a wide range of media. Additionally, it offers multiple HDMI inputs, allowing for convenient connectivity with other audiovisual devices such as TVs, gaming consoles, and Blu-ray players. In terms of video quality, the Pioneer VSX-321-K-P supports high-definition resolutions up to 1080p, enabling sharp and vibrant visuals. It also supports upscaling of lower resolution content, providing an enhanced viewing experience. The control interface of this home cinema set is user-friendly, featuring an intuitive menu system and a remote control for convenient operation. Adjusting audio settings, selecting media sources, and navigating menus are straightforward tasks. Overall, the Pioneer VSX-321-K-P home cinema set is a reliable and durable audiovisual solution that offers high-quality sound and video performance. Its functionality and user-friendly interface make it a suitable choice for those seeking an immersive home entertainment experience.

General
BrandPioneer
ModelVSX-321-K-P
Producthome cinema set
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-321-K-P below.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my home cinema set?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Why is there no sound coming from my home cinema set?

Make sure the volume level is turned up and not muted. Check the audio input settings on both your home cinema set and the connected device. Also, verify that the speakers are properly connected and the wires are securely attached.

How do I connect additional devices to my Pioneer VSX-321-K-P?

Locate the available HDMI inputs on the back of your home cinema set and connect the HDMI cable from your device to one of these inputs. Then, using the source selection feature on the remote or control panel, choose the appropriate HDMI input to view the content from the connected device.

Can I connect a subwoofer to my home cinema set?

Yes, you can connect a subwoofer to enhance the bass performance of your audio system. Utilize the dedicated subwoofer output on the back of the Pioneer VSX-321-K-P and connect it to the corresponding input on your subwoofer. Be sure to adjust the subwoofer settings in the menu to optimize the sound.

How can I adjust the audio settings on my home cinema set?

On your remote control or control panel, locate the "Audio" button/menu. From there, you can navigate through the available options such as adjusting the bass, treble, balance, or switching between different sound modes. Explore these settings to customize the audio output based on your preferences.

Is it possible to calibrate the speakers for better sound quality?

Yes, your Pioneer VSX-321-K-P has a built-in speaker calibration feature. Access the setup menu and locate the speaker calibration or auto-setup option. Follow the on-screen instructions to measure and adjust the speaker levels, distances, and other parameters for optimal sound reproduction in your room.

Is the manual of the Pioneer VSX-321-K-P available in English?

Yes, the manual of the Pioneer VSX-321-K-P is available in English .

Is your question not listed? Ask your question here

No results