Pioneer VSX-321-K-P manual

Pioneer VSX-321-K-P
7.5 · 14
PDF manual
 · 64 pages
English
manualPioneer VSX-321-K-P

Additional information

28
En
07
07

Chapter 7:

Additional information

Troubleshooting

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Take a look at the other components and electrical appliances being used, because sometimes the problem may lie there. If the trouble isn’t sorted out even after going through the checks below, ask your nearest Pioneer authorized independent service company to carry out repair work.• If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions.
General
The power does not turn on.
Disconnect the power plug from the outlet, and insert again.
Make sure there are no loose strands of speaker wire touching
the rear panel. This could cause the receiver to shut off
automatically.
The receiver suddenly switches off.
When the Auto Power Down function is working, the power
will automatically turn off if the receiver has not operated for
several hours. Check the setting for the Auto Power Down
function (see The Auto Power Down menu on page 26).
After about a minute (you won’t be able to switch the unit on
during this time), switch the receiver back on. If the message
persists, call a Pioneer authorized independent service
company.
Power automatically turns ON/OFF and the input switches
from one to another. (When the ARC function is ON)
The CEC (Consumer Electronic Control) function may activate
when the ARC function is turned ON, causing power to turn
ON and OFF and the input to switch from one to another.
Since this unit does not guarantee synchronized operation
based on the CEC function, turn OFF the HDMI CONTROL
setting on the connected player. Refer to the relevant device’s
instruction manual for details.
If this does not work, turn OFF the ARC function. If this is the
case, listen to the TV audio after connecting this unit and the
TV with an audio cable.
No sound is output when an input function is selected.
Use MASTER VOLUME to turn up the volume.
Press MUTE on the remote control to turn muting off.
Set the SIGNAL SEL to H (HDMI), C1/O1 (digital) or A (analog)
according to the type of connections made (refer to page 17).
Make sure the component is connected correctly (refer to
Connecting your equipment on page 10).
Check the audio output settings of the source component.
Refer to the instruction manual supplied with the source
component.
No image is output when an input function is selected.
Make sure the component is connected correctly (refer to
Connecting your equipment on page 10).
Use the same type of video cables for the source component
and TV to connect to this receiver (see About video outputs
connection on page 13).
The video input selected on the TV monitor is incorrect. Refer
to the instruction manual supplied with the TV.
No sound from subwoofer.
The Dolby Digital or DTS source you are listening to may not
have an LFE channel.
Switch the subwoofer setting in Speaker Setting on page 25 to
YES or PLUS.
Switch the LFE ATT (LFE Attenuate) on page 24 to LFEATT 0 or
LFEATT 5.
No sound from surround or center speakers.
Connect the speakers properly (refer to page 11).
Refer to Speaker Setting
on page 25 to check the speaker
se
t
tings.
Refer to Channel Level on page 26 to check the speaker levels.
The Phase Control feature doesn’t seem to have an audible
effect.
Make sure the speaker distance setting is correct for all
speakers (see Speaker Distance on page 26).
Considerable noise in radio broadcasts.
Connect the antenna (page 15) and adjust the position for
best reception.
Route any loose cables away from the antenna terminals and
wires.
Fully extend the FM wire antenna, position for best reception,
and secure to a wall (or connect an outdoor FM antenna).
Connect an additional internal or external AM antenna
(page 16).
Turn off equipment causing interference or move it away from
the receiver (or move antennas farther away from equipment
causing noise).
Broadcast stations cannot be selected automatically.
Connect an outdoor antenna (refer to page 16).
Noise during playback of a cassette deck.
Move the cassette deck away from your receiver, until the
noise disappears.
No sound is output or a noise is output when software with
DTS is played back.
Make sure the player’s settings are correct and/or the DTS
signal out is on. Refer to the instruction manual supplied with
the DVD player.
Can’t operate the remote control.
Replace the batteries (refer to page 9).
Operate within 7 m, 30º of the remote sensor (refer to page 9).
Remove the obstacle or operate from another position.
Avoid exposing the remote sensor on the front panel to direct
light.
The display is dark or off.
Press DIMMER on the remote control repeatedly to return to
the default.
The front panel display switches over for no apparent
reason to various different displays.
This happens because the demo display is in operation. To
turn off the demo display, press any button to go back to the
original display, or set the FL DEMO to OFF (see The FL Demo
Mode menu on page 26).
TEMP shows in the display and the volume level drops.
The temperature within the unit has exceeded the allowable
value. Try moving the unit for better ventilation (see page 2).
Lower the volume level.
07_additional_info.fm 28 ページ 2011年7月22日 金曜日 午後6時8分

View the manual for the Pioneer VSX-321-K-P here, for free. This manual comes under the category home cinema sets and has been rated by 14 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-321-K-P or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 5
H
HenrikDecember 13, 2020

Hello! I have obtained a Pioneer VSX-321-K-P home cinema set. However, it is missing the AC input cable. How can I solve this? Thank you in advance, Best regards, Henrik.

This message has been automatically translated
J
JOHANDEL July 21, 2022

I want to connect the audio cable to use it with my mobile device, but I can't find how or how to synchronize it.

I want to connect the audio cable to use it with my mobile device, but I can't find how or how to synchronize it.
zoom-in
View photo
This message has been automatically translated
P
Prasanthi SanthoshJanuary 28, 2021

Does pioneer vsx 321 kp supports 4k?(amazon fire stick)

W
William PorterApril 12, 2023

Show set up satilight tv hook up

J
Jimmie Duncan December 31, 2022

How can I get the user manual the full manual please.

The Pioneer VSX-321-K-P is a home cinema set that offers an immersive audio and video experience. It is designed with functionality and ease of use in mind. This home cinema set features a 5.1 channel surround sound system, allowing for a dynamic soundstage that enhances the audio quality of movies and music. The included speakers deliver clear and precise sound, providing a balanced audio experience. The VSX-321-K-P supports various audio formats, including Dolby Digital and DTS-HD, which ensure compatibility with a wide range of media. Additionally, it offers multiple HDMI inputs, allowing for convenient connectivity with other audiovisual devices such as TVs, gaming consoles, and Blu-ray players. In terms of video quality, the Pioneer VSX-321-K-P supports high-definition resolutions up to 1080p, enabling sharp and vibrant visuals. It also supports upscaling of lower resolution content, providing an enhanced viewing experience. The control interface of this home cinema set is user-friendly, featuring an intuitive menu system and a remote control for convenient operation. Adjusting audio settings, selecting media sources, and navigating menus are straightforward tasks. Overall, the Pioneer VSX-321-K-P home cinema set is a reliable and durable audiovisual solution that offers high-quality sound and video performance. Its functionality and user-friendly interface make it a suitable choice for those seeking an immersive home entertainment experience.

General
BrandPioneer
ModelVSX-321-K-P
Producthome cinema set
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-321-K-P below.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my home cinema set?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Why is there no sound coming from my home cinema set?

Make sure the volume level is turned up and not muted. Check the audio input settings on both your home cinema set and the connected device. Also, verify that the speakers are properly connected and the wires are securely attached.

How do I connect additional devices to my Pioneer VSX-321-K-P?

Locate the available HDMI inputs on the back of your home cinema set and connect the HDMI cable from your device to one of these inputs. Then, using the source selection feature on the remote or control panel, choose the appropriate HDMI input to view the content from the connected device.

Can I connect a subwoofer to my home cinema set?

Yes, you can connect a subwoofer to enhance the bass performance of your audio system. Utilize the dedicated subwoofer output on the back of the Pioneer VSX-321-K-P and connect it to the corresponding input on your subwoofer. Be sure to adjust the subwoofer settings in the menu to optimize the sound.

How can I adjust the audio settings on my home cinema set?

On your remote control or control panel, locate the "Audio" button/menu. From there, you can navigate through the available options such as adjusting the bass, treble, balance, or switching between different sound modes. Explore these settings to customize the audio output based on your preferences.

Is it possible to calibrate the speakers for better sound quality?

Yes, your Pioneer VSX-321-K-P has a built-in speaker calibration feature. Access the setup menu and locate the speaker calibration or auto-setup option. Follow the on-screen instructions to measure and adjust the speaker levels, distances, and other parameters for optimal sound reproduction in your room.

Is the manual of the Pioneer VSX-321-K-P available in English?

Yes, the manual of the Pioneer VSX-321-K-P is available in English .

Is your question not listed? Ask your question here

No results