Pioneer VSX-321-K-P manual

Pioneer VSX-321-K-P
7.5 · 14
PDF manual
 · 64 pages
English
manualPioneer VSX-321-K-P

The System Setup menu

26
En
05
05
1Use
/
to select ‘SP SETUP’ from the System Setup
menu, then press ENTER.
2Use
/
to select ‘X.OVER’ from the SP SETUP menu,
then press ENTER.
3Use
/
to select the frequency cutoff point.
Frequencies below the cutoff point will be sent to the
subwoofer (or LARGE speakers).
4 When you’re finished, press RETURN.
You return to the Speaker Setup menu.

Channel Level

Using the channel level settings, you can adjust the overall
balance of your speaker system, an important factor when
setting up a home theater system.
CAUTION
• The test tones used in the System Setup are output at
high volume.
1Use
/
to select ‘SP SETUP’ from the System Setup
menu, then press ENTER.
2Use
/
to select ‘CH LEVEL’ from the SP SETUP menu,
then press ENTER.
3Use
/
to select a setup option.
T. TONE M – Move the test tone manually from speaker
to speaker and adjust individual channel levels.
T. TONE A – Adjust channel levels as the test tone moves
from speaker to speaker automatically.
4 Confirm your selected setup option.
The test tones will start after you press ENTER. After the
volume increases to the reference level, test tones will be
output.
5Use
/
to adjust the level of each channel.
If you selected T. TONE M, use / to switch speakers. The
T. TONE A setup outputs test tones in the following order
(depends on speaker settings):
L C R SR SBR SBL SL SW
Adjust the level of each speaker as the test tone is emitted.
Note
If you are using a Sound Pressure Level (SPL) meter, take
the readings from your main listening position and adjust
the level of each speaker to 75 dB SPL (C-weighting/slow
reading).
The subwoofer test tone is output at low volumes. You
may need to adjust the level after testing with an actual
soundtrack.
6 When you’re finished, press RETURN.
You return to the Speaker Setup menu.
Tip
• You can change the channel levels at any time by press
, then press CH SELECT and LEV +/– on the
remote control. You can also press CH SELECT and use
/ to select the channel, and then use / to adjust
the channel levels.

Speaker Distance

For good sound depth and separation from your system, you
need to specify the distance of your speakers from the
listening position. The receiver can then add the proper delay
needed for effective surround sound.
1Use
/
to select ‘SP SETUP’ from the System Setup
menu, then press ENTER.
2Use
/
to select ‘SP DISTN’ from the SP SETUP menu,
then press ENTER.
3Use
/
to choose the speaker that you want then set
the distance.
Use / to adjust the distance of each speaker in 0.03 m
increments.
4 When you’re finished, press RETURN.
You return to the Speaker Setup menu.

The Auto Power Down menu

Set to automatically turn off the receiver after a specified time
has passed (when the power has been on with no operation
for several hours.
• Default setting: OFF
1Use
/
to select ‘APD’ from the System Setup menu,
then press ENTER.
2 Specify the amount of time to allow before the power
is turned off (when there has been no operation).
•Use / to select 2, 4 or 6 hours, or OFF (if no automatic
shutoff is desired).
3 When you’re finished, press RETURN.
You return to the System Setup menu.

The FL Demo Mode menu

Set whether or not various demos are to be shown on the
front panel display.
• Default setting: ON
1Use
/
to select ‘FL DEMO’ from the System Setup
menu, then press ENTER.
2Use
/
to choose ON or OFF for the demo display.
3 When you’re finished, press RETURN.
You return to the System Setup menu.
RECEIVER
05_system_setup.fm 26 ページ 2011年9月1日 木曜日 午後8時16分

View the manual for the Pioneer VSX-321-K-P here, for free. This manual comes under the category home cinema sets and has been rated by 14 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-321-K-P or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 5
H
HenrikDecember 13, 2020

Hello! I have obtained a Pioneer VSX-321-K-P home cinema set. However, it is missing the AC input cable. How can I solve this? Thank you in advance, Best regards, Henrik.

This message has been automatically translated
J
JOHANDEL July 21, 2022

I want to connect the audio cable to use it with my mobile device, but I can't find how or how to synchronize it.

I want to connect the audio cable to use it with my mobile device, but I can't find how or how to synchronize it.
zoom-in
View photo
This message has been automatically translated
P
Prasanthi SanthoshJanuary 28, 2021

Does pioneer vsx 321 kp supports 4k?(amazon fire stick)

W
William PorterApril 12, 2023

Show set up satilight tv hook up

J
Jimmie Duncan December 31, 2022

How can I get the user manual the full manual please.

The Pioneer VSX-321-K-P is a home cinema set that offers an immersive audio and video experience. It is designed with functionality and ease of use in mind. This home cinema set features a 5.1 channel surround sound system, allowing for a dynamic soundstage that enhances the audio quality of movies and music. The included speakers deliver clear and precise sound, providing a balanced audio experience. The VSX-321-K-P supports various audio formats, including Dolby Digital and DTS-HD, which ensure compatibility with a wide range of media. Additionally, it offers multiple HDMI inputs, allowing for convenient connectivity with other audiovisual devices such as TVs, gaming consoles, and Blu-ray players. In terms of video quality, the Pioneer VSX-321-K-P supports high-definition resolutions up to 1080p, enabling sharp and vibrant visuals. It also supports upscaling of lower resolution content, providing an enhanced viewing experience. The control interface of this home cinema set is user-friendly, featuring an intuitive menu system and a remote control for convenient operation. Adjusting audio settings, selecting media sources, and navigating menus are straightforward tasks. Overall, the Pioneer VSX-321-K-P home cinema set is a reliable and durable audiovisual solution that offers high-quality sound and video performance. Its functionality and user-friendly interface make it a suitable choice for those seeking an immersive home entertainment experience.

General
BrandPioneer
ModelVSX-321-K-P
Producthome cinema set
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-321-K-P below.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my home cinema set?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Why is there no sound coming from my home cinema set?

Make sure the volume level is turned up and not muted. Check the audio input settings on both your home cinema set and the connected device. Also, verify that the speakers are properly connected and the wires are securely attached.

How do I connect additional devices to my Pioneer VSX-321-K-P?

Locate the available HDMI inputs on the back of your home cinema set and connect the HDMI cable from your device to one of these inputs. Then, using the source selection feature on the remote or control panel, choose the appropriate HDMI input to view the content from the connected device.

Can I connect a subwoofer to my home cinema set?

Yes, you can connect a subwoofer to enhance the bass performance of your audio system. Utilize the dedicated subwoofer output on the back of the Pioneer VSX-321-K-P and connect it to the corresponding input on your subwoofer. Be sure to adjust the subwoofer settings in the menu to optimize the sound.

How can I adjust the audio settings on my home cinema set?

On your remote control or control panel, locate the "Audio" button/menu. From there, you can navigate through the available options such as adjusting the bass, treble, balance, or switching between different sound modes. Explore these settings to customize the audio output based on your preferences.

Is it possible to calibrate the speakers for better sound quality?

Yes, your Pioneer VSX-321-K-P has a built-in speaker calibration feature. Access the setup menu and locate the speaker calibration or auto-setup option. Follow the on-screen instructions to measure and adjust the speaker levels, distances, and other parameters for optimal sound reproduction in your room.

Is the manual of the Pioneer VSX-321-K-P available in English?

Yes, the manual of the Pioneer VSX-321-K-P is available in English .

Is your question not listed? Ask your question here

No results