Pioneer VSX-321-K-P manual

Pioneer VSX-321-K-P
7.5 · 14
PDF manual
 · 64 pages
English
manualPioneer VSX-321-K-P
02
02

Connecting your equipment

11
En
English
Français
Español

Connecting the speakers

The receiver will work with just two stereo speakers (the front speakers in the diagram) but
using at least three speakers is recommended, and a complete setup is best for surround sound.
Make sure you connect the speaker on the right to the right (R) terminal and the speaker on
the left to the left (L) terminal. Also make sure the positive and negative (+/) terminals on the
receiver match those on the speakers.Be sure to complete all connections before connecting this unit to the AC power source.Bare wire connections
CAUTION
These speaker terminals carry HAZARDOUS LIVE voltage. To prevent the risk of electric
shock when connecting or disconnecting the speaker cables, disconnect the power cord before touching any uninsulated parts.
Make sure that all the bare speaker wire is inserted fully into the speaker terminal. If any
of the bare speaker wire touches the back panel it may cause the power to cut off as a safety measure.

Connect the surround back speakers

Connect the SURR BACK PRE OUT outputs of the unit and additional amplifier to add a
surround back speaker.
You can use the additional amplifier on the surround back channel pre-outs for a single
speaker as well. In this case plug the amplifier into the left (L (Single)) terminal only.
1 Push open the tabs and insert exposed wire.2 Release the tabs.
12
HDMI
VIDEO
L
R
R
L
COAXIALAUDIOSPEAKERSANTENNAOPTICAL
ASSIGNABLE
OUT
A
CD-R/TAPE
OUT
SURR BACK
PRE OUT
L
R
(
Single
)
(
CD-R / TAPE
)
IN CD/SAT
MONITOR
OUT
CD/SAT
DVD
IN
TV
IN
IN
DVD
DVR/BDR IN DVD IN BD IN CD/SAT
(
TV
)
IN
1
IN
1
FM
UNBAL
75
AM LOOP
FRONT CENTER
SURROUND SUBWOOFER
RLRL
ANALOG
RL
AUDIO IN
SPEAKER R SPEAKER L
CenterSurround rightFront rightFront leftSubwooferSurround leftSurround back rightSurround back
left
Surround back channel amplifier
02_connecting_up.fm 11 ページ 2011年7月22日 金曜日 午後6時5分

View the manual for the Pioneer VSX-321-K-P here, for free. This manual comes under the category home cinema sets and has been rated by 14 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-321-K-P or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 5
H
HenrikDecember 13, 2020

Hello! I have obtained a Pioneer VSX-321-K-P home cinema set. However, it is missing the AC input cable. How can I solve this? Thank you in advance, Best regards, Henrik.

This message has been automatically translated
J
JOHANDEL July 21, 2022

I want to connect the audio cable to use it with my mobile device, but I can't find how or how to synchronize it.

I want to connect the audio cable to use it with my mobile device, but I can't find how or how to synchronize it.
zoom-in
View photo
This message has been automatically translated
P
Prasanthi SanthoshJanuary 28, 2021

Does pioneer vsx 321 kp supports 4k?(amazon fire stick)

W
William PorterApril 12, 2023

Show set up satilight tv hook up

J
Jimmie Duncan December 31, 2022

How can I get the user manual the full manual please.

The Pioneer VSX-321-K-P is a home cinema set that offers an immersive audio and video experience. It is designed with functionality and ease of use in mind. This home cinema set features a 5.1 channel surround sound system, allowing for a dynamic soundstage that enhances the audio quality of movies and music. The included speakers deliver clear and precise sound, providing a balanced audio experience. The VSX-321-K-P supports various audio formats, including Dolby Digital and DTS-HD, which ensure compatibility with a wide range of media. Additionally, it offers multiple HDMI inputs, allowing for convenient connectivity with other audiovisual devices such as TVs, gaming consoles, and Blu-ray players. In terms of video quality, the Pioneer VSX-321-K-P supports high-definition resolutions up to 1080p, enabling sharp and vibrant visuals. It also supports upscaling of lower resolution content, providing an enhanced viewing experience. The control interface of this home cinema set is user-friendly, featuring an intuitive menu system and a remote control for convenient operation. Adjusting audio settings, selecting media sources, and navigating menus are straightforward tasks. Overall, the Pioneer VSX-321-K-P home cinema set is a reliable and durable audiovisual solution that offers high-quality sound and video performance. Its functionality and user-friendly interface make it a suitable choice for those seeking an immersive home entertainment experience.

General
BrandPioneer
ModelVSX-321-K-P
Producthome cinema set
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-321-K-P below.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my home cinema set?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Why is there no sound coming from my home cinema set?

Make sure the volume level is turned up and not muted. Check the audio input settings on both your home cinema set and the connected device. Also, verify that the speakers are properly connected and the wires are securely attached.

How do I connect additional devices to my Pioneer VSX-321-K-P?

Locate the available HDMI inputs on the back of your home cinema set and connect the HDMI cable from your device to one of these inputs. Then, using the source selection feature on the remote or control panel, choose the appropriate HDMI input to view the content from the connected device.

Can I connect a subwoofer to my home cinema set?

Yes, you can connect a subwoofer to enhance the bass performance of your audio system. Utilize the dedicated subwoofer output on the back of the Pioneer VSX-321-K-P and connect it to the corresponding input on your subwoofer. Be sure to adjust the subwoofer settings in the menu to optimize the sound.

How can I adjust the audio settings on my home cinema set?

On your remote control or control panel, locate the "Audio" button/menu. From there, you can navigate through the available options such as adjusting the bass, treble, balance, or switching between different sound modes. Explore these settings to customize the audio output based on your preferences.

Is it possible to calibrate the speakers for better sound quality?

Yes, your Pioneer VSX-321-K-P has a built-in speaker calibration feature. Access the setup menu and locate the speaker calibration or auto-setup option. Follow the on-screen instructions to measure and adjust the speaker levels, distances, and other parameters for optimal sound reproduction in your room.

Is the manual of the Pioneer VSX-321-K-P available in English?

Yes, the manual of the Pioneer VSX-321-K-P is available in English .

Is your question not listed? Ask your question here

No results