Pioneer VSX-1022 manual

Pioneer VSX-1022
8.2 · 5
PDF manual
 · 65 pages
English
manualPioneer VSX-1022

Additional information

10
10
61
Network connections could be restricted due to the
computer’s network settings, security settings, etc. Check the
computer’s network settings, security settings, etc.
Cannot access the component connected to the network.
The component connected to the network is not properly set. If
the client is automatically authorized, you need to enter the
corresponding information again. Check whether the
connection status is set to “Do not authorize”.
There are no playable audio files on the component connected
to the network. Check the audio files stored on the component
connected to the network.
Audio playback is undesirably stopped or disturbed.
The audio file currently being played back was not recorded in
a format playable on this receiver.
-
Check whether the audio file was recorded in a format
supported by this receiver.
-
Check whether the folder has been damaged or corrupted.
-
Note that there are cases where even the audio files listed as
playable on this receiver cannot be played back or displayed
(page 45).
The LAN cable is currently disconnected. Connect the LAN
cable properly (page 20).
There is heavy traffic on the network with the Internet being
accessed on the same network. Use 100BASE-TX to access the
components on the network.
When in the DMR mode, depending on the external controller
being used, playback may be interrupted when a volume
operation is performed from the controller. In this case, adjust
the volume from the receiver or remote control.
Cannot access Windows Media Player 11 or Windows
Media Player 12.
In case of Windows Media Player 11: You are currently logged
onto the domain through your PC with Windows XP or
Windows Vista installed. Instead of logging onto the domain,
log onto the local machine (page 39).
In case of Windows Media Player 12: You are currently logged
onto the domain through your PC with Windows 7 installed.
Instead of logging onto the domain, log onto the local machine
(page 39).
Cannot listen to Internet radio stations.
The firewall settings for components on the network are
currently in operation. Check the firewall settings for
components on the network.
You are currently disconnected from the Internet. Check the
connection settings for components on the network, and
consult with your network service provider if necessary
(page 41).
The broadcasts from an Internet radio station are stopped or
interrupted. There are cases where you cannot listen to some
Internet radio stations even when they are listed in the list of
Internet radio stations on this receiver (page 39).
The NETWORK function cannot be operated with the
buttons on the remote control.
The remote control is not currently set to the NETWORK mode.
Press
NETWORK
to set the remote control to the NETWORK
mode (page 43).
HDMI
No picture or sound.
If the problem still persists when connecting your HDMI
component directly to your monitor, please consult the
component or monitor manual or contact the manufacturer for
support.
No picture.
VSX-822 only: Video signals that are input from the analog video
terminal will not output from the HDMI terminal. Signals that
are input from the HDMI terminal will not output from the
analog video terminal. Be consistent with the type of cable
between input and output.
Depending in the output settings of the source component, it
may be outputting a video format that can’t be displayed.
Change the output settings of the source, or connect using the
composite video jacks.
This receiver is HDCP-compatible. Check that the components
you are connecting are also HDCP-compatible. If they are not,
please connect them using the composite video jacks.
Depending on the connected source component, it’s possible
that it will not work with this receiver (even if it is HDCP-
compatible). In this case, connect using the composite video
jacks between source and receiver.
If video images do not appear on your TV, try adjusting the
resolution, Deep Color or other setting for your component.
To output signals in Deep Color, use an HDMI cable (High
Speed HDMI
®
Cable) to connect this receiver to a component
or TV with the Deep Color feature.
No sound, or sound suddenly ceases.
Check that the HDMI setting is set to AMP (page 36).
If the component is a DVI device, use a separate connection for
the audio.
HDMI format digital audio transmissions require a longer time
to be recognized. Due to this, interruption in the audio may
occur when switching between audio formats or beginning
playback.
Turning on/off the device connected to this unit’s HDMI OUT
terminal during playback, or disconnecting/connecting the
HDMI cable during playback, may cause noise or interrupted
audio.
Synchronized operation not possible using Control with
HDMI function.
Check the HDMI connections.
The cable may be damaged.
Select ON for the Control with HDMI setting (see HDMI Setup
on page 52).
Turn the TV’s power on before turning on this receiver’s power.
Set the TV side Control with HDMI setting to on (see TV’s
operating instructions).

Important information regarding the HDMI

connection

There are cases where you may not be able to route HDMI
signals through this receiver (this depends on the HDMI
equipped component you are connecting-check with the
manufacturer for HDMI compatibility information).
If you aren’t receiving HDMI signals properly through this
receiver (from your component), please try the following
configuration when connecting up.
Configuration A
Connect your HDMI-equipped component directly to the
display using an HDMI cable. Then use the most convenient
connection (digital is recommended) for sending audio to the
receiver. See the operating instructions for more on audio
connections. Set the display volume to minimum when using
this configuration.
Note
Depending on the component, audio output may be limited
to the number of channels available from the connected
display unit (for example audio output is reduced to 2
channels for a monitor with stereo audio limitations).

View the manual for the Pioneer VSX-1022 here, for free. This manual comes under the category receivers and has been rated by 5 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-1022 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 5
B
Bob D.July 26, 2023

The unit appears to be functioning as designed, but the visual display is totally blank. Is there something that we could have hit? That would shut the display off if so how do I reset it.

The unit appears to be functioning as designed, but the visual display is totally blank. Is there something that we could hav...
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 25, 2023

To reset the Pioneer VSX-1022 receiver and potentially fix the blank screen issue, follow these steps: 1. Switch the receiver into standby mode. 2. While holding down the BAND button, press and hold the STANDBY/ON button for about two seconds. 3. When you see "RESET?" appear on the display, press the AUTO SURROUND/STREAM DIRECT button. 4. Press the ALC/STANDARD SURR button to confirm the reset. 5. "OK" will appear on the display, indicating that the receiver has been reset to the factory default settings.

This answer is automatically generated
G
Gary McDannelSeptember 18, 2023

Is there a way to set-up the receiver so that when it turns on, a specific input signal (e.g., DVR/BDR) is automatically selected?

Is there a way to set-up the receiver so that when it turns on, a specific input signal (e.g., DVR/BDR) is automatically sele...
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 25, 2023

Yes, there is a way to configure the Pioneer VSX-1022 receiver to automatically select a specific input signal when it is turned on. Here are the steps to configure this setting: 1. Press the "Home Menu" button on the receiver. 2. Navigate to the "HDMI Setup" option using the arrow keys. 3. Select the "Control" option and set it to "ON". 4. Choose the "ARC" setting and set it to "ON" if you want the TV's sound to be input via the HDMI terminal. If you prefer the TV's sound to be input from the audio input terminals other than HDMI, set the "ARC" setting to "OFF". 5. Select the "Standby Through" setting and choose the HDMI input signal that you want to be output to the TV when the receiver is in standby mode. If you want the receiver to remember the last selected HDMI input signal, choose the "LAST" option. This can only be selected when the "Control" setting is set to "OFF".

This answer is automatically generated
D
DonnaMarch 6, 2021

Why would the unit turn On for seconds then automatically turn off ?

Why would the unit turn On for seconds then automatically turn off ?
zoom-in
View photo
1 comment
M
Mark BalandApril 23, 2022

The unit might not be getting enough power. It’s a 1000 watt receiver. I had one for years, but my old wiring started having problems. The receiver would click on and off. I had to switch to a low powered (100 watt) sound bar.

G
Greg N.January 16, 2023

Can I adjust volume levels to be consistent between inputs for different devices?

B
Bob FlynnJune 11, 2023

I have a vsx-1022 and a Sony xbr-65x950g TV. The receiver is connected to the eARC input, a firestick is in HDMI 1 and a Tivo is in HDMI 2. everything works well and the tv remote controls the receiver. I cannot, however get into the home menu to set up my speakers, therefore I do not have surround sound. I have 4 6.5" ceiling speakers, a front speaker on the wall over the TV and a woofer. I get sound, just not surround sound. I need help getting into the menu as the TV reports no signal when I choose the eARC input that the receiver is connected to.

The Pioneer VSX-1022 is a receiver that delivers a power output of 80 watts per channel at 8 Ohm and has 7.1 audio output channels. It offers versatile connectivity options with six HDMI inputs, one component video input, two composite video inputs, two digital audio optical inputs, and two digital audio coaxial inputs. Additionally, it is equipped with one remote (IR) input, one Ethernet LAN (RJ-45) port, and one HDMI output. The receiver allows for seamless integration with various multimedia devices, making it suitable for home theater setups. It supports high-definition video and audio formats, ensuring an immersive audiovisual experience. Its multiple HDMI inputs enable connection to gaming consoles, Blu-ray players, and other compatible devices, while the HDMI output allows for convenient connectivity to a compatible television or projector. Built with durable components, the Pioneer VSX-1022 ensures reliable performance and longevity. Its sleek and compact design allows for easy placement within a home entertainment system setup. With its 140-watt power output per channel at 6 Ohm, the receiver is capable of delivering powerful and clear sound, enhancing the overall audio quality of movies, music, and other multimedia content. The inclusion of one remote (IR) output further adds to its usability, enabling control of other compatible devices within the system. Its Ethernet LAN (RJ-45) port promotes network connectivity and allows for integration with streaming services and online content. Overall, the Pioneer VSX-1022 receiver offers a range of features and connectivity options, making it a suitable choice for those seeking to enhance their audiovisual experience.

General
BrandPioneer
ModelVSX-1022 | VSX1022K
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF)
Audio
Power output per channel (20-20KHz@8 Ohm)80 W
Audio output channels7.1 channels
Power output per channel (1KHz@8 Ohm)110 W
Power output per channel (1KHz@6 Ohm)140 W
Audio D/A Converter (DAC)24-bit/192kHz
Receiver type-
Inputs
HDMI in6
Component video (YPbPr/YCbCr) in1
Composite video in2
Digital audio optical in2
Digital audio coaxial in2
Remote (IR) input1
Ethernet LAN (RJ-45) ports1
Outputs
Number of HDMI outputs1
Remote (IR) output1
Headphone outputs1
Headphone connectivity3.5 mm
Ports & interfaces
Speakers connectivity type-
Connectivity technologyWired
File formats
Audio formats supportedAAC, FLAC, MP3, WAV, WMA
Network
Ethernet LANYes
Wi-FiNo
BluetoothNo
Radio
Supported radio bandsAM, FM
Internet radio services supportedPandora, vTuner
Optical drive
Optical drive includedNo
Storage
Card reader integrated-
Video
3DYes
Technical details
Display-
Audio decodersDolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD Master Audio
x.v.Color supportYes
Audio Return Channel (ARC)Yes
Handheld remote controlYes
Product colorBlack
Audio amplifierYes
Sleep timerYes
Volume controlRotary
On Screen Display (OSD)Yes
Apple docking compatibilityYes
Audio Lip synchronizationYes
AirPlayYes
AV inputYes
Graphical user interface (GUI)Yes
Bi-ampingYes
Apple dockingYes
Yes
Weight & dimensions
Width435.1 mm
Depth342.39 mm
Height167.64 mm
Weight9371 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-1022 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Pioneer VSX-1022?

The Pioneer VSX-1022 has a weight of 9371 g.

What is the height of the Pioneer VSX-1022?

The Pioneer VSX-1022 has a height of 167.64 mm.

What is the width of the Pioneer VSX-1022?

The Pioneer VSX-1022 has a width of 435.1 mm.

What is the depth of the Pioneer VSX-1022?

The Pioneer VSX-1022 has a depth of 342.39 mm.

How can I connect my TV to the Pioneer VSX-1022 receiver?

To connect your TV to the receiver, use an HDMI cable. Connect one end of the cable to the HDMI output on the receiver and the other end to the HDMI input on your TV. Make sure to select the correct HDMI input on your TV to enjoy audio and video through the receiver.

What is the maximum power output of the Pioneer VSX-1022 receiver?

The Pioneer VSX-1022 has a maximum power output of 80 Watts per channel. This means it is capable of delivering sufficient power to drive most home theater speakers efficiently.

How can I set up the speaker configuration on the Pioneer VSX-1022?

To set up the speaker configuration, go to the receiver's settings menu and select the "Speaker Setup" or "Audio Settings" option. From there, you can specify the number of speakers in your setup, adjust their size (large or small), and set individual channel levels for optimal sound balance.

Can the Pioneer VSX-1022 receiver be connected to a wireless network?

Unfortunately, the Pioneer VSX-1022 does not have built-in Wi-Fi connectivity. However, it does have an Ethernet port at the rear. To connect to a wireless network, you would need to use an external Wi-Fi adapter compatible with the receiver's specifications.

How can I perform a factory reset on the Pioneer VSX-1022?

To perform a factory reset, turn off the receiver and then press and hold the "BAND" button on the front panel. While holding the button, press the "STANDBY/ON" button. Continue holding the "BAND" button until "Reset?" appears on the display. Press the "AUTO SURR/STREAM DIRECT" button to confirm the reset and restore the receiver to its default settings.

How many HDMI inputs does the Pioneer VSX-1022 have?

The Pioneer VSX-1022 has 6 HDMI inputs.

What is the power output per channel at 8 Ohms?

The power output per channel at 8 Ohms is 80 Watts.

How many audio output channels does the Pioneer VSX-1022 have?

The Pioneer VSX-1022 has 7.1 audio output channels.

What is the power output per channel at 1KHz and 8 Ohms?

The power output per channel at 1KHz and 8 Ohms is 110 Watts.

What is the power output per channel at 1KHz and 6 Ohms?

The power output per channel at 1KHz and 6 Ohms is 140 Watts.

Is the manual of the Pioneer VSX-1022 available in English?

Yes, the manual of the Pioneer VSX-1022 is available in English .

Is your question not listed? Ask your question here

No results