Pioneer VSX-1022 manual

Pioneer VSX-1022
8.2 · 5
PDF manual
 · 65 pages
English
manualPioneer VSX-1022
6
Chapter
6
38

Playback with NETWORK features

Introduction
This receiver is equipped with the LAN terminal and you can
enjoy the following features by connecting your components
to these terminals.
Listening to Internet radio stations
You can select and listen to your favorite Internet radio station
from the list of Internet radio stations created, edited, and
managed by the vTuner database service exclusively for use
with the Pioneer products.
See Playback with Network functions
on page 39 and Listening
to Internet radio stations on page 39.
Playback the music files stored in PCs
You can playback a lot of musics stored in your PCs using this
unit.
Besides a PC, you can also play back audio files stored on
your other components with the built-in media server
function based on DLNA 1.0 or DLNA 1.5 framework and
protocols (i.e. network-capable hard disks and audio
systems).
See Playback with Network functions
on page 39 and Playing
back audio files stored on components on the network on
page 40.
Listening to Pandora
See Listening to Pandora Internet Radio on page 40.
Note
To listen to Internet radio stations, you must sign a contract
with an ISP (Internet Service Provider) beforehand.
Photo or video files cannot be played back.
With Windows Media Player 11 or Windows Media Player
12, you can even play back copyrighted audio files on this
receiver.
About playable DLNA network devices
This unit allows you to play music on media servers connected
on an identical Local Area Network (LAN) as the receiver. This
unit allows for the playing of files stored on the following
devices:
PCs running Microsoft Windows Vista or XP with Windows
Media Player 11 installed
PCs running Microsoft Windows 7 with Windows Media
Player 12 installed
DLNA-compatible digital media servers (on PCs or other
components)
Files stored in a PC or DMS (Digital Media Server) as
described above can be played via command from an external
Digital Media Controller (DMC). Devices controlled by this
DMC to play files are called DMRs (Digital Media Renderers).
This receiver supports this DMR function. When in the DMR
mode, such operations as playing and stopping files can be
performed from the external controller. Volume adjustment
and the muting control are also possible. The DMR mode is
canceled if the remote control unit is operated while in the
DMR mode (aside from certain buttons, including the
VOLUME +/–
,
MUTE
and
DISP
).
Depending on the external controller being used, playback
may be interrupted when the volume is adjusted from the
controller. In this case, adjust the volume from the receiver
or remote control.
Using AirPlay on iPod touch, iPhone, iPad, and
iTunes
AirPlay works with iPhone 4S, iPhone 4, iPhone 3GS, iPod
touch (4th, 3rd and 2nd generations), iPad 2, iPad with iOS 4.2
or later, and iTunes 10.1 (Mac and PC) or later.
To use AirPlay, select your receiver on your iPod touch,
iPhone, iPad or in iTunes. *1
The receiver’s input will switch automatically to AirPlay when
AirPlay is in use. *2
The following operations can be performed when in AirPlay
mode:
Adjustment of the receiver’s volume from iPod touch,
iPhone, iPad or iTunes.
Pause/resume, next/previous track, and shuffle/repeat
from the remote control of the receiver. (Press
NETWORK
to switch the remote control to the network operation
mode.)
*1: For more information, see the Apple website (http://
www.apple.com).
*2: The receiver’s power automatically turns on when
Network Standby is set to ON (page 51
).
Note
A network environment is required to use AirPlay.
AirPlay provided on this receiver has been developed and
tested based on the software versions for the iPod, iPhone,
iPad and the software versions for iTunes that are indicated
on the Pioneer website. AirPlay may not be compatible with
iPod, iPhone, iPad or iTunes software versions other than
those indicated on the Pioneer website.
About the DHCP server function
To play back audio files stored on components on the network
or listen to Internet radio stations, you must turn on the DHCP
server function of your router. In case your router does not
have the built-in DHCP server function, it is necessary to set
up the network manually. Otherwise, you cannot play back
audio files stored on components on the network or listen to
Internet radio stations. See The Network Setup menu
on
page 41 for more on this.
Authorizing this receiver
This receiver must be authorized to enable playback. This
happens automatically when the receiver makes a connection
over the network to the PC. If not, please authorize this
receiver manually on the PC. The authorization (or
permission) method for access varies depending on the type
of server currently being connected. For more information on
authorizing this receiver, refer to the instruction manual of
your server.

View the manual for the Pioneer VSX-1022 here, for free. This manual comes under the category receivers and has been rated by 5 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Pioneer VSX-1022 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 5
B
Bob D.July 26, 2023

The unit appears to be functioning as designed, but the visual display is totally blank. Is there something that we could have hit? That would shut the display off if so how do I reset it.

The unit appears to be functioning as designed, but the visual display is totally blank. Is there something that we could hav...
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 25, 2023

To reset the Pioneer VSX-1022 receiver and potentially fix the blank screen issue, follow these steps: 1. Switch the receiver into standby mode. 2. While holding down the BAND button, press and hold the STANDBY/ON button for about two seconds. 3. When you see "RESET?" appear on the display, press the AUTO SURROUND/STREAM DIRECT button. 4. Press the ALC/STANDARD SURR button to confirm the reset. 5. "OK" will appear on the display, indicating that the receiver has been reset to the factory default settings.

This answer is automatically generated
G
Gary McDannelSeptember 18, 2023

Is there a way to set-up the receiver so that when it turns on, a specific input signal (e.g., DVR/BDR) is automatically selected?

Is there a way to set-up the receiver so that when it turns on, a specific input signal (e.g., DVR/BDR) is automatically sele...
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 25, 2023

Yes, there is a way to configure the Pioneer VSX-1022 receiver to automatically select a specific input signal when it is turned on. Here are the steps to configure this setting: 1. Press the "Home Menu" button on the receiver. 2. Navigate to the "HDMI Setup" option using the arrow keys. 3. Select the "Control" option and set it to "ON". 4. Choose the "ARC" setting and set it to "ON" if you want the TV's sound to be input via the HDMI terminal. If you prefer the TV's sound to be input from the audio input terminals other than HDMI, set the "ARC" setting to "OFF". 5. Select the "Standby Through" setting and choose the HDMI input signal that you want to be output to the TV when the receiver is in standby mode. If you want the receiver to remember the last selected HDMI input signal, choose the "LAST" option. This can only be selected when the "Control" setting is set to "OFF".

This answer is automatically generated
D
DonnaMarch 6, 2021

Why would the unit turn On for seconds then automatically turn off ?

Why would the unit turn On for seconds then automatically turn off ?
zoom-in
View photo
1 comment
M
Mark BalandApril 23, 2022

The unit might not be getting enough power. It’s a 1000 watt receiver. I had one for years, but my old wiring started having problems. The receiver would click on and off. I had to switch to a low powered (100 watt) sound bar.

G
Greg N.January 16, 2023

Can I adjust volume levels to be consistent between inputs for different devices?

B
Bob FlynnJune 11, 2023

I have a vsx-1022 and a Sony xbr-65x950g TV. The receiver is connected to the eARC input, a firestick is in HDMI 1 and a Tivo is in HDMI 2. everything works well and the tv remote controls the receiver. I cannot, however get into the home menu to set up my speakers, therefore I do not have surround sound. I have 4 6.5" ceiling speakers, a front speaker on the wall over the TV and a woofer. I get sound, just not surround sound. I need help getting into the menu as the TV reports no signal when I choose the eARC input that the receiver is connected to.

The Pioneer VSX-1022 is a receiver that delivers a power output of 80 watts per channel at 8 Ohm and has 7.1 audio output channels. It offers versatile connectivity options with six HDMI inputs, one component video input, two composite video inputs, two digital audio optical inputs, and two digital audio coaxial inputs. Additionally, it is equipped with one remote (IR) input, one Ethernet LAN (RJ-45) port, and one HDMI output. The receiver allows for seamless integration with various multimedia devices, making it suitable for home theater setups. It supports high-definition video and audio formats, ensuring an immersive audiovisual experience. Its multiple HDMI inputs enable connection to gaming consoles, Blu-ray players, and other compatible devices, while the HDMI output allows for convenient connectivity to a compatible television or projector. Built with durable components, the Pioneer VSX-1022 ensures reliable performance and longevity. Its sleek and compact design allows for easy placement within a home entertainment system setup. With its 140-watt power output per channel at 6 Ohm, the receiver is capable of delivering powerful and clear sound, enhancing the overall audio quality of movies, music, and other multimedia content. The inclusion of one remote (IR) output further adds to its usability, enabling control of other compatible devices within the system. Its Ethernet LAN (RJ-45) port promotes network connectivity and allows for integration with streaming services and online content. Overall, the Pioneer VSX-1022 receiver offers a range of features and connectivity options, making it a suitable choice for those seeking to enhance their audiovisual experience.

General
BrandPioneer
ModelVSX-1022 | VSX1022K
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF)
Audio
Power output per channel (20-20KHz@8 Ohm)80 W
Audio output channels7.1 channels
Power output per channel (1KHz@8 Ohm)110 W
Power output per channel (1KHz@6 Ohm)140 W
Audio D/A Converter (DAC)24-bit/192kHz
Receiver type-
Inputs
HDMI in6
Component video (YPbPr/YCbCr) in1
Composite video in2
Digital audio optical in2
Digital audio coaxial in2
Remote (IR) input1
Ethernet LAN (RJ-45) ports1
Outputs
Number of HDMI outputs1
Remote (IR) output1
Headphone outputs1
Headphone connectivity3.5 mm
Ports & interfaces
Speakers connectivity type-
Connectivity technologyWired
File formats
Audio formats supportedAAC, FLAC, MP3, WAV, WMA
Network
Ethernet LANYes
Wi-FiNo
BluetoothNo
Radio
Supported radio bandsAM, FM
Internet radio services supportedPandora, vTuner
Optical drive
Optical drive includedNo
Storage
Card reader integrated-
Video
3DYes
Technical details
Display-
Audio decodersDolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS-HD Master Audio
x.v.Color supportYes
Audio Return Channel (ARC)Yes
Handheld remote controlYes
Product colorBlack
Audio amplifierYes
Sleep timerYes
Volume controlRotary
On Screen Display (OSD)Yes
Apple docking compatibilityYes
Audio Lip synchronizationYes
AirPlayYes
AV inputYes
Graphical user interface (GUI)Yes
Bi-ampingYes
Apple dockingYes
Yes
Weight & dimensions
Width435.1 mm
Depth342.39 mm
Height167.64 mm
Weight9371 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer VSX-1022 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Pioneer VSX-1022?

The Pioneer VSX-1022 has a weight of 9371 g.

What is the height of the Pioneer VSX-1022?

The Pioneer VSX-1022 has a height of 167.64 mm.

What is the width of the Pioneer VSX-1022?

The Pioneer VSX-1022 has a width of 435.1 mm.

What is the depth of the Pioneer VSX-1022?

The Pioneer VSX-1022 has a depth of 342.39 mm.

How can I connect my TV to the Pioneer VSX-1022 receiver?

To connect your TV to the receiver, use an HDMI cable. Connect one end of the cable to the HDMI output on the receiver and the other end to the HDMI input on your TV. Make sure to select the correct HDMI input on your TV to enjoy audio and video through the receiver.

What is the maximum power output of the Pioneer VSX-1022 receiver?

The Pioneer VSX-1022 has a maximum power output of 80 Watts per channel. This means it is capable of delivering sufficient power to drive most home theater speakers efficiently.

How can I set up the speaker configuration on the Pioneer VSX-1022?

To set up the speaker configuration, go to the receiver's settings menu and select the "Speaker Setup" or "Audio Settings" option. From there, you can specify the number of speakers in your setup, adjust their size (large or small), and set individual channel levels for optimal sound balance.

Can the Pioneer VSX-1022 receiver be connected to a wireless network?

Unfortunately, the Pioneer VSX-1022 does not have built-in Wi-Fi connectivity. However, it does have an Ethernet port at the rear. To connect to a wireless network, you would need to use an external Wi-Fi adapter compatible with the receiver's specifications.

How can I perform a factory reset on the Pioneer VSX-1022?

To perform a factory reset, turn off the receiver and then press and hold the "BAND" button on the front panel. While holding the button, press the "STANDBY/ON" button. Continue holding the "BAND" button until "Reset?" appears on the display. Press the "AUTO SURR/STREAM DIRECT" button to confirm the reset and restore the receiver to its default settings.

How many HDMI inputs does the Pioneer VSX-1022 have?

The Pioneer VSX-1022 has 6 HDMI inputs.

What is the power output per channel at 8 Ohms?

The power output per channel at 8 Ohms is 80 Watts.

How many audio output channels does the Pioneer VSX-1022 have?

The Pioneer VSX-1022 has 7.1 audio output channels.

What is the power output per channel at 1KHz and 8 Ohms?

The power output per channel at 1KHz and 8 Ohms is 110 Watts.

What is the power output per channel at 1KHz and 6 Ohms?

The power output per channel at 1KHz and 6 Ohms is 140 Watts.

Is the manual of the Pioneer VSX-1022 available in English?

Yes, the manual of the Pioneer VSX-1022 is available in English .

Is your question not listed? Ask your question here

No results