View the manual for the Pioneer TS-W311D4 here, for free. This manual comes under the category car speakers and has been rated by 7 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Pioneer TS-W311D4 or do you need help? Ask your question here


The Pioneer TS-W311D4 is a passive subwoofer designed for use in car audio systems. With a RMS (Root Mean Square) power output of 400 watts and a peak power output of 1400 watts, this subwoofer delivers powerful and deep bass to enhance the audio experience in your vehicle. Featuring a sensitivity rating of 95 dB, the TS-W311D4 efficiently converts power into sound, ensuring clear and impactful bass reproduction. With an impedance of 8 Ω, it is compatible with a wide range of amplifier systems. The subwoofer driver has a diameter of 12 inches (300 mm), allowing for a larger diaphragm surface area and improved low-frequency response. Constructed with a polymer fiber diaphragm material, it is both lightweight and rigid, contributing to accurate and distortion-free bass reproduction. The volume acoustic compliance (VAS) of the TS-W311D4 is 32.7 liters, indicating the subwoofer's ability to handle large air volumes. Its resonance frequency (Fs) is 43 Hz, providing a solid low-end foundation for music playback. Featuring a total Q-factor (Qts) of 1.05, the subwoofer exhibits a balance between efficiency and low-frequency extension. With a peak excursion (Xmax) of 10.8 mm, it is capable of moving a substantial amount of air, resulting in impactful bass output. Overall, the Pioneer TS-W311D4 is a high-quality car speaker that delivers powerful and accurate bass reproduction.
| Brand | Pioneer |
| Model | TS-W311D4 | TS-W311D4 |
| Product | car speaker |
| EAN | 884938266925, 0884938266932, 0884938266925 |
| Language | English |
| Filetype | User manual (PDF) |
| Subwoofer type | Passive subwoofer |
| Subwoofer RMS power | 400 W |
| Subwoofer frequency range | 20 - 125 Hz |
| Subwoofer peak power | 1400 W |
| Subwoofer sensitivity | 95 dB |
| Subwoofer impedance | 8 Ω |
| Subwoofer driver diameter (imperial) | 12 " |
| Subwoofer driver diameter | 300 mm |
| Product type | Subwoofer driver |
| Product color | Black |
| Volume Acoustic Compliance (VAS) | 32.7 L |
| Resonance frequency (Fs) | 43 Hz |
| Total Q-factor (Qts) | 1.05 |
| Peak excursion (Xmax) | 10.8 mm |
| Subwoofer driver diaphragm material | Polymer fiber |
| Housing material | - |
| Width | 168.5 mm |
| Depth | 151 mm |
| Height | 326.6 mm |
| Diameter | 283 mm |
| Weight | 6200 g |
| Volume | 42.5 L |
| Interface | Terminal |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer TS-W311D4 below.
The Pioneer TS-W311D4 has a weight of 6200 g.
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
The Pioneer TS-W311D4 has a height of 326.6 mm.
The Pioneer TS-W311D4 has a width of 168.5 mm.
The Pioneer TS-W311D4 has a depth of 151 mm.
Ensure that the speaker wires are properly connected to both the speaker and the car stereo system. Additionally, check the audio settings on your car stereo to confirm that it is configured to play audio through the speaker.
Adjust the low-frequency settings on your car stereo's equalizer to enhance the bass response. Experiment with different levels until you achieve the desired bass output.
This speaker has a peak power handling of 1,400 Watts and a RMS power handling of 400 Watts. To maximize its performance and durability, ensure that your car stereo or amplifier is within these power specifications.
Begin by carefully reading your vehicle's manual to understand the specific installation requirements. Generally, you will need to remove the existing speakers, connect the Pioneer TS-W311D4 to the car's wiring harness, secure it in the appropriate location, and ensure proper grounding.
This speaker is designed for use in a sealed or ported enclosure. To optimize its performance, you can refer to the manual to determine the recommended enclosure volume, port diameter, and length if you opt for a ported design.
The RMS power of the Pioneer TS-W311D4 car speaker is 400 W. This means that it has a relatively high power output, allowing for loud and clear audio in the car.
The impedance of the Pioneer TS-W311D4 car speaker is 8 Ω. This is a standard impedance for car speakers and should work well with most car audio systems.
The volume of the Pioneer TS-W311D4 car speaker is 42.5 L. This indicates that it has a relatively large size, which can contribute to deeper and more impactful bass.
The resonance frequency of the Pioneer TS-W311D4 car speaker is 43 Hz. This means that it is tuned to produce deep bass frequencies, which is ideal for car audio enthusiasts who enjoy powerful low-end sound.
The diaphragm material of the Pioneer TS-W311D4 car speaker is polymer fibre. This material is known for its rigidity and stiffness, which can help to minimize distortion and improve the overall sound quality of the speaker.
Yes, the manual of the Pioneer TS-W311D4 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Pioneer and is the answer not in the manual?
Question and answer
Number of questions: 0