View the manual for the Pioneer SX-N30DAB-S here, for free. This manual comes under the category receivers and has been rated by 1 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Pioneer SX-N30DAB-S or do you need help? Ask your question here


| Brand | Pioneer |
| Model | SX-N30DAB-S | SX-N30DAB-S |
| Product | receiver |
| EAN | 4573211150063 |
| Language | English |
| Filetype | User manual (PDF) |
| Power output per channel (20-20KHz@8 Ohm) | 85 W |
| Audio output channels | - channels |
| Receiver type | Surround |
| Total Harmonic Distortion (THD) | 1 % |
| Impedance | 8 Ω |
| Frequency range | 20 - 20000 Hz |
| HDMI in | 0 |
| Digital audio coaxial in | 1 |
| Digital audio optical in | 1 |
| USB ports quantity | 1 |
| Ethernet LAN (RJ-45) ports | 1 |
| Headphone connectivity | 3.5 mm |
| Headphone outputs | 1 |
| Line-out | Yes |
| Audio input | Analogue |
| Digital Signal Processing (DSP) | Yes |
| Display | - |
| Audio decoders | - |
| Product color | Silver |
| Handheld remote control | Yes |
| Audio amplifier | Yes |
| Apple docking compatibility | Not supported |
| Subwoofer | Preout |
| Yes |
| Speakers connectivity type | Banana connector |
| Connectivity technology | Wired |
| Audio formats supported | AAC, APE, FLAC, MP3, OGG, SBC, WAV, WMA |
| Ethernet LAN | Yes |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| Bluetooth version | 2.1+EDR |
| Bluetooth profiles | A2DP, AVRCP |
| Supported radio bands | DAB, DAB+, FM |
| Internet radio | Yes |
| Internet radio services supported | Spotify, TuneIn |
| Preset stations quantity | 40 |
| Optical drive included | No |
| Card reader integrated | No |
| AC input voltage | 220-230 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 220 W |
| Power consumption (standby) | 0.2 W |
| Width | 435 mm |
| Depth | 326.5 mm |
| Height | 148 mm |
| Weight | 8500 g |
| 3D | No |
| Manual | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer SX-N30DAB-S below.
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.
Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.
The Pioneer SX-N30DAB-S has a weight of 8500 g.
The Pioneer SX-N30DAB-S has a height of 148 mm.
The Pioneer SX-N30DAB-S has a width of 435 mm.
The Pioneer SX-N30DAB-S has a depth of 326.5 mm.
Yes, the Pioneer SX-N30DAB-S has a power output of 85 Watts per channel. This means that it can deliver a relatively strong and clear audio signal to the connected speakers, providing a satisfying listening experience.
Yes, the Pioneer SX-N30DAB-S is a surround receiver. This means that it is designed to support multi-channel audio setups, allowing users to enjoy a more immersive audio experience while watching movies or listening to music.
The Total Harmonic Distortion (THD) of the Pioneer SX-N30DAB-S is 1%. This indicates that the receiver is capable of delivering relatively accurate and distortion-free audio output, ensuring high-quality sound reproduction.
The Pioneer SX-N30DAB-S does not have any HDMI inputs. This means that it may not be the best option for users who require multiple HDMI connections for their audiovisual setup, as they would need to rely on alternative input methods.
Yes, the Pioneer SX-N30DAB-S has both digital audio optical and coaxial inputs. This offers flexibility for connecting various audio sources, such as DVD players or game consoles, that support these types of connections, enhancing the versatility of the receiver.
To connect the Pioneer SX-N30DAB-S receiver to your home network, follow these steps: 1. Ensure that you have a stable internet connection available in your home. 2. Locate the LAN (10/100) port on the back of the receiver. It is labeled as such. 3. Connect one end of an Ethernet cable to the LAN port on the receiver. 4. Connect the other end of the Ethernet cable to an available LAN port on your router. 5. Make sure the cable is securely connected to both the receiver and the router. 6. Once the physical connection is established, power on the receiver. 7. On your smartphone, computer, or NAS device, ensure that it is connected to the same router that you used for the receiver. 8. Now you can enjoy various network features such as Internet radio services, AirPlay, and Spotify. Please note that you need to have an active internet connection to access these network features.
The sound from the speakers of the Pioneer SX-N30DAB-S receiver may become distorted or unclear due to various reasons. Here are some possible causes and troubleshooting steps to address the issue: 1. Check the speaker connections: Ensure that the speaker wires are securely connected to the appropriate terminals on the receiver and the speakers themselves. Make sure there are no loose connections or frayed wires. 2. Verify speaker impedance: Confirm that the impedance of the connected speakers matches the recommended range specified in the receiver's manual. If the impedance is too low or too high, it can affect the sound quality. 3. Adjust audio settings: Use the receiver's audio settings to fine-tune the sound. Press the AUDIO button on the receiver, then use the direction buttons to select and adjust settings such as bass, treble, and balance. Experiment with different settings to find the optimal sound quality. 4. Disable the Direct feature: If the Direct feature is enabled, it bypasses the tone control circuits and may affect the sound. Press the AUDIO button and ensure that the Direct feature is turned off. 5. Check the volume level: Excessively high volume levels can cause distortion. Reduce the volume and see if the sound quality improves. By following these troubleshooting steps, you can address potential issues that may be causing distorted or unclear sound from the speakers of the Pioneer SX-N30DAB-S receiver.
When using the Pioneer SX-N30DAB-S receiver, it is important to take certain precautions to ensure safe and optimal operation. Here are some specific steps to follow: 1. Placement: Position the receiver on a stable and level surface, away from heat sources and direct sunlight. Allow sufficient space around the receiver for proper ventilation. 2. Ventilation: Ensure that the ventilation slots on the receiver are not blocked. Avoid placing objects on top of the receiver that may obstruct airflow. 3. Power supply: Connect the receiver to a power outlet that meets the specified voltage requirements. Use only the provided power cord and avoid using extension cords or multiple adapters. 4. Handling: When connecting or disconnecting cables, ensure that the receiver is powered off. Avoid pulling on the cables forcefully to prevent damage. 5. Cleaning: To clean the receiver, use a soft, dry cloth. Avoid using abrasive cleaners or solvents that may damage the surface. 6. Lightning storms: During thunderstorms, it is recommended to unplug the receiver from the power outlet to protect it from power surges. By following these precautions, you can ensure the safe and proper use of the Pioneer SX-N30DAB-S receiver while maximizing its performance and longevity.
To dispose of the Pioneer SX-N30DAB-S receiver in accordance with the WEEE (Waste Electrical and Electronic Equipment) directive, follow these steps: 1. Contact your local waste management authority or recycling center to inquire about their specific guidelines for electronic waste disposal. 2. If applicable, check if the retailer or manufacturer of the Pioneer SX-N30DAB-S receiver offers a take-back program or recycling service for their products. They may provide instructions on how to return the receiver for proper disposal. 3. If no take-back program is available, do not dispose of the receiver with regular household waste. Electronic waste should be recycled separately to minimize environmental impact. 4. Remove any personal data or sensitive information from the receiver before disposal. Reset the receiver to its factory settings to ensure all data is erased. 5. Bring the Pioneer SX-N30DAB-S receiver to a designated electronic waste collection point or recycling facility. Follow the instructions provided by the waste management authority or recycling center for proper drop-off or collection procedures. By following these steps, you can ensure that the Pioneer SX-N30DAB-S receiver is disposed of in accordance with the WEEE directive, promoting responsible and environmentally-friendly waste management.
There could be several reasons why you are unable to access certain external services through the Pioneer SX-N30DAB-S receiver. Here are some possible causes and troubleshooting steps: 1. Check network connectivity: Ensure that the receiver is properly connected to your home network. Verify that the network cables are securely connected and that the network settings on the receiver are correctly configured. 2. Verify internet connection: Make sure that your internet connection is active and stable. Check if other devices on the same network can access the external services. 3. Check service availability: Some external services may have specific requirements or may be temporarily unavailable. Confirm if the services you are trying to access are currently operational. 4. Update firmware: Ensure that the receiver's firmware is up to date. Check the manufacturer's website for any available firmware updates and follow the instructions to install them. 5. Reset network settings: If you are still unable to access the external services, try resetting the network settings on the receiver. Refer to the receiver's manual for instructions on how to perform a network reset. By following these troubleshooting steps, you can address potential issues and improve the accessibility of external services through the Pioneer SX-N30DAB-S receiver.
Yes, the manual of the Pioneer SX-N30DAB-S is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Pioneer and is the answer not in the manual?
Question and answer
Number of questions: 0