View the manual for the Pioneer SX-10AE here, for free. This manual comes under the category receivers and has been rated by 2 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Pioneer SX-10AE or do you need help? Ask your question here



The Pioneer SX-10AE receiver is an audio amplifier and stereo receiver that offers a power output of 45 watts per channel at 20-20KHz with an 8 Ohm impedance. It features 4.1 audio output channels and a power output of 100 watts per channel at 1KHz with a 6 Ohm impedance. This receiver includes a remote control for convenient operation. However, it does not support Apple docking. The Pioneer SX-10AE is equipped with one pre-out channel for connectivity to a subwoofer, and it supports pre-out connectivity. It does not have any HDMI inputs. With a total harmonic distortion (THD) of 0.08% and a signal-to-noise ratio (SNR) of 100 dB, the Pioneer SX-10AE delivers clear and high-quality audio reproduction. Overall, this receiver is designed to provide reliable performance and durability.

| Brand | Pioneer |
| Model | SX-10AE | SX-10AE-B |
| Product | receiver |
| EAN | 4573211153187 |
| Language | English |
| Filetype | User manual (PDF), Datasheet (PDF) |
| Audio amplifier | Yes |
| Product color | Black |
| Handheld remote control | Yes |
| Apple docking | No |
| Display | VFL |
| Auto standby | Yes |
| Sleep timer | Yes |
| Audio decoders | - |
| Bass adjustment | Yes |
| Treble adjustment | Yes |
| AirPlay | - |
| Detachable power cord | No |
| Headphone out | Yes |
| Quantity | 1 |
| RF ports quantity | 1 |
| Power output per channel (20-20KHz@8 Ohm) | 45 W |
| Audio output channels | 4.1 channels |
| Receiver type | stereo |
| Power output per channel (1KHz@6 Ohm) | 100 W |
| Impedance | 6 Ω |
| Pre-out channels | 1 SW |
| Pre-out connectivity | Yes |
| Total Harmonic Distortion (THD) | 0.08 % |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Frequency range | 20 - 20000 Hz |
| 4Ω speaker support | Yes |
| Speaker selector | A / B |
| HDMI in | 0 |
| Line-in | Yes |
| Digital audio optical in | 0 |
| Digital audio coaxial in | 0 |
| Multichannel audio input type | RCA |
| USB ports quantity | 0 |
| AC (power) in | Yes |
| Audio (L/R) in | 4 |
| Line-out | Yes |
| Number of HDMI outputs | 0 |
| Headphone outputs | 1 |
| Headphone connectivity | 3.5 mm |
| Audio (L/R) out | 4 |
| Multichannel audio output type | Terminals |
| Speakers connectivity type | RCA |
| Connectivity technology | Wired |
| FM antenna ports quantity | 1 |
| Multichannel pre out connectivity | RCA |
| Audio formats supported | AAC, SBC |
| Ethernet LAN | No |
| Wi-Fi | No |
| Bluetooth | Yes |
| Bluetooth version | 4.2 |
| Bluetooth profiles | A2DP, AVRCP |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| Optical drive included | No |
| Card reader integrated | No |
| 3D | No |
| AC input frequency | 50 - 60 Hz |
| AC input voltage | 220-240 V |
| Power consumption (typical) | 160 W |
| Power consumption (standby) | 0.4 W |
| Width | 435 mm |
| Depth | 321 mm |
| Height | 147 mm |
| Weight | 7000 g |
| Certification | CE |
| Manual | Yes |
| FM antenna | Yes |
| AM antenna | Yes |
| Batteries included | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer SX-10AE below.
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.
Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.
The Pioneer SX-10AE has a weight of 7000 g.
The Pioneer SX-10AE has the following certifications: CE.
The Pioneer SX-10AE has a height of 147 mm.
The Pioneer SX-10AE has a width of 435 mm.
The Pioneer SX-10AE has a depth of 321 mm.
Ensure the receiver is turned off, then connect the left and right speaker wires to the corresponding speaker terminals on the back of the receiver. Make sure to match the positive (+) and negative (-) ends correctly for each speaker.
Press the "TUNER" button on the front panel, then use the "TUNING" knob to select the desired FM frequency. You can also use the "PRESET" buttons to directly access your saved radio stations.
Press the "BASS" or "TREBLE" button on the front panel to activate the tone controls. Then use the "MULTI JOG" dial to adjust the bass or treble level according to your preference.
Press the "SLEEP" button repeatedly until the desired sleep time appears on the display panel. The sleep timer allows you to automatically turn off the receiver after a specified duration, providing convenience for bedtime listening.
Utilize the "AUX" input on the back of the receiver and connect one end of a 3.5mm audio cable to the headphone jack of your device. Connect the other end to the "AUX" input. Then, select the "AUX" input on the receiver using the input selector knob on the front panel to play audio from your external device.
Yes, the Pioneer SX-10AE has an audio amplifier. This means that it can amplify the audio signal to provide better sound quality and volume for the user.
Yes, the Pioneer SX-10AE comes with a remote control. This allows the user to conveniently control the receiver from a distance without needing to directly interact with the device.
No, the Pioneer SX-10AE does not support Apple docking. This means that it cannot directly connect with Apple devices such as iPhones or iPods for audio playback.
The power output per channel of the Pioneer SX-10AE at 8 Ohms is 45 Watts. This is a decent power output for a stereo receiver and should be sufficient for most home audio setups.
No, the Pioneer SX-10AE does not have any HDMI inputs. This means that it cannot connect to HDMI devices like Blu-ray players or game consoles, limiting its connectivity options compared to receivers that do have HDMI inputs.
Yes, the manual of the Pioneer SX-10AE is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Pioneer and is the answer not in the manual?
Question and answer
Number of questions: 4The Pioneer SX-10AE receiver keeps automatically switching to standby mode. How can I turn it on?
This message has been automatically translatedMy receiver won't pair with my computer the computer recognizes the receiver and gives a code but the code doesn't appear on the receiver
I can not get any power to my unit
How to pair with bluetooth