View the manual for the Pioneer S-W250S-W here, for free. This manual comes under the category speakers and has been rated by 2 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the Pioneer S-W250S-W or do you need help? Ask your question here

The Pioneer S-W250S-W is a home theater speaker designed to deliver immersive audio experiences. With its magnetically shielded design, it ensures that magnetic interference is minimized, allowing for placement near electronic devices without potential distortion in audio quality. The speaker boasts a mid-range driver diameter of 300 millimeters, which provides a wide sound dispersion, allowing listeners to enjoy rich and detailed audio throughout a room. The center speaker impedance is rated at 15000 ohms, while the subwoofer impedance is set at 50000 ohms. This impedance rating indicates the resistance of the speaker to the flow of electrical current, ensuring efficient power transfer and minimizing potential distortion or loss of sound quality. Featuring 5.1 audio output channels, the Pioneer S-W250S-W delivers sound from multiple directions, creating a truly immersive surround sound experience. With an RMS rated power of 250 watts and an impedance of 4 ohms, this speaker can handle high volumes without sacrificing audio fidelity. The crossover frequency of 100 Hz ensures a smooth transition between the speaker's different frequency ranges, allowing for seamless blending of low, mid, and high-frequency sounds. Measuring 430 x 430 x 480 millimeters in width, depth, and height respectively, the Pioneer S-W250S-W is a substantial addition to any home theater setup. With a weight of 34500 grams, it is a sturdy and robust speaker that can be relied upon for long-lasting durability. Overall, the Pioneer S-W250S-W is a powerful and versatile home theater speaker that delivers high-quality audio performance, making it a great addition to any audio system.
| Brand | Pioneer |
| Model | S-W250S-W | S-W250S-W |
| Product | speaker |
| EAN | 4977729908312 |
| Language | English |
| Filetype | User manual (PDF) |
| Type | Home theatre speakers |
| Magnetically shielded | Yes |
| Center speaker impedance | 15000 Ω |
| Center speaker frequency range | 23 - 1000 Hz |
| Subwoofer impedance | 50000 Ω |
| Subwoofer frequency range | 20 - 20000 Hz |
| Dimensions (WxDxH) | 430 x 430 x 480 mm |
| Power requirements | AC 220 - 230 V 50/60 Hz |
| Mid-range driver diameter | 300 mm |
| Audio output channels | 5.1 channels |
| RMS rated power | 250 W |
| Impedance | 4 Ω |
| Crossover frequency | 100 Hz |
| Product color | Wood |
| Magnetically shielded | Yes |
| Audio output channels | 5.1 channels |
| RMS rated power | 250 W |
| Product color | Wood |
| Weight | 34500 g |
| Dimensions (WxDxH) | 430 x 430 x 480 mm |
| Weight | 34500 g |
| Type | Home theatre speakers |
| Impedance | 4 Ω |
| Power requirements | AC 220 - 230 V 50/60 Hz |
| Center speaker impedance | 15000 Ω |
| Center speaker frequency range | 23 - 1000 Hz |
| Subwoofer impedance | 50000 Ω |
| Subwoofer frequency range | 20 - 20000 Hz |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer S-W250S-W below.
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.
Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
The Pioneer S-W250S-W has a weight of 34500 g.
Yes, the Pioneer S-W250S-W is a home theatre speaker. This means it is designed to provide enhanced audio experience for movies and other multimedia content.
Yes, the Pioneer S-W250S-W is magnetically shielded. This ensures that it can be placed near electronic devices without causing any interference.
The mid-range driver in the Pioneer S-W250S-W has a diameter of 300 mm. This larger driver size allows for improved mid-range audio reproduction.
The center speaker in the Pioneer S-W250S-W has an impedance of 15000 Ω. This high impedance means that it requires less power to produce the same volume compared to lower impedance speakers.
The Pioneer S-W250S-W has an RMS rated power of 250 W. This indicates the maximum continuous power it can handle without causing distortion. This is a relatively high power rating, making it suitable for providing loud and clear audio.
To troubleshoot if the power switch of the Pioneer S-W250S-W speaker is not working, you can follow these steps: 1. Check the power supply plug: Ensure that the power supply plug is correctly inserted into the power outlet. If it is loose or not properly connected, securely insert the plug. 2. Verify speaker and accessory connections: Make sure that the speaker and accessory RCA plug cord connections are correct and not disconnected. Check the connections again and ensure they are properly connected. 3. Adjust the volume knob: Turn the volume knob clockwise slowly to ensure it is not set to the minimum position. If the volume knob is turned all the way down, the power switch may not function properly. 4. Confirm speaker cord polarity: Check the polarity of the speaker cords, ensuring they are connected correctly from the amplifier or receiver to the Pioneer S-W250S-W speaker. If the polarity is reversed, it can affect the power switch functionality. 5. Adjust input and output levels: If the power switch is still not working, check the input and output levels. Ensure that the level is not set too high, as it can cause issues with the power switch. If the troubleshooting steps above do not resolve the issue with the power switch, it is recommended to contact your nearest Pioneer authorized service center or dealer for further assistance and repair work.
If the power indicator of the Pioneer S-W250S-W speaker is not illuminating when you turn it on, you can try the following troubleshooting steps: 1. Check the power supply: Ensure that the speaker is properly connected to a power source and that the power outlet is functioning correctly. Try plugging the speaker into a different outlet to rule out any issues with the power source. 2. Verify the power switch: Make sure that the power switch is in the "on" position. Sometimes the switch may be accidentally turned off or in an intermediate position. 3. Inspect the power cable: Check the power cable for any signs of damage or loose connections. Ensure that the cable is securely plugged into both the speaker and the power outlet. 4. Test with a different power cable: If possible, try using a different power cable to see if the issue is with the cable itself. This can help determine if the problem lies with the original cable. 5. Contact customer support: If the power indicator still does not illuminate after following the above steps, it is recommended to contact Pioneer customer support for further assistance. They can provide specific troubleshooting advice or arrange for repairs if necessary. Remember to always refer to the user manual for detailed instructions and safety precautions when troubleshooting any issues with your Pioneer S-W250S-W speaker.
To improve the desired bass response in the MUSIC mode of the Pioneer S-W250S-W speaker, you can follow these steps: 1. Check the bass mode switch: Ensure that the bass mode switch is set to the MUSIC mode. This mode is recommended for music sources and provides a flat frequency response. 2. Adjust the crossover frequency: Use the crossover knob to set the upper frequency limit for the subwoofer. The recommended crossover frequency depends on the diameter of the left/right speakers. For example, set it to 50Hz when the diameter is 20cm or more, 100Hz when the diameter is between 10 and 25cm, and 150Hz when the diameter is 12cm or less. 3. Verify the bypass switch: If you are using the bass management features of an AV receiver, set the bypass switch to BYPASS. This allows you to use the low-pass filter of the AV receiver for high-quality sound. 4. Adjust the volume: Use the volume knob to set the subwoofer volume according to your preference. Turn the knob slowly from the minimum position. 5. Avoid increasing bass on the amplifier: Since the Pioneer S-W250S-W speaker allows independent bass level adjustment, there is no need to increase the bass level on the stereo or AV amplifier. By following these steps, you should be able to optimize the bass response in the MUSIC mode of the Pioneer S-W250S-W speaker for an enhanced audio experience.
To troubleshoot if the crossover knob and bypass switch of the Pioneer S-W250S-W speaker are not functioning properly, you can follow these steps: 1. Check the connections: Ensure that the speaker and accessory RCA plug cords are correctly connected. Make sure they are securely plugged in and not disconnected. 2. Verify the crossover knob: Inspect the crossover knob and ensure it is set to the desired frequency range. Adjust the knob to different settings and listen for any changes in the sound output. 3. Test the bypass switch: Toggle the bypass switch between ON and OFF positions. Listen for any differences in the sound output when the switch is activated or deactivated. 4. Clean the controls: If the crossover knob or bypass switch feels sticky or unresponsive, gently clean them using a soft cloth. Avoid using any liquid cleaners or abrasive materials that could damage the controls. 5. Contact customer support: If the crossover knob and bypass switch continue to malfunction after following the above steps, it is recommended to contact Pioneer customer support for further assistance. They can provide specific troubleshooting advice or arrange for repairs if necessary. Remember to always refer to the user manual for detailed instructions and safety precautions when troubleshooting any issues with your Pioneer S-W250S-W speaker.
If the volume knob of the Pioneer S-W250S-W speaker is not adjusting the volume as expected, you can try the following troubleshooting steps: 1. Check the connections: Ensure that the speaker is properly connected to the audio source, such as a stereo or AV amplifier. Make sure the connections are secure and not loose. 2. Verify the input level: Check the input level on the stereo or AV amplifier. Ensure that the volume level is set appropriately and not too low, as this can affect the volume output of the speaker. 3. Clean the volume knob: If the volume knob feels sticky or unresponsive, gently clean it using a soft cloth. Avoid using any liquid cleaners or abrasive materials that could damage the knob. 4. Test with different audio sources: Try connecting the speaker to different audio sources, such as a different stereo or AV amplifier, to see if the issue persists. This can help determine if the problem lies with the speaker or the audio source. 5. Contact customer support: If the volume knob continues to malfunction after following the above steps, it is recommended to contact Pioneer customer support for further assistance. They can provide specific troubleshooting advice or arrange for repairs if necessary. Remember to always refer to the user manual for detailed instructions and safety precautions when troubleshooting any issues with your Pioneer S-W250S-W speaker.
Yes, the manual of the Pioneer S-W250S-W is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Pioneer and is the answer not in the manual?
Question and answer
Number of questions: 0