Pioneer S-HF41-LR manual

Pioneer S-HF41-LR
7.5 · 1
PDF manual
 · 8 pages
English
manualPioneer S-HF41-LR
1
Thank you for buying this Pioneer product. Please read through
these operating instructions so you will know how to operate your
model properly. After you have finished reading the instructions,
put them away in a safe place for future reference.

Before you start

The nominal impedance of this speaker system is 8 ohms.
Connect the speaker system to an amplifier with a load
impedance ranging from 4 to 16 ohms (a model with
“4 – 16 ” displayed on the speaker output terminals).
Do not touch the speaker cones as they are easily damaged.
In order to prevent damage to the speaker system resulting from
input overload, please observe the following precautions:
Do not supply power to the speaker system in excess of the
maximum permissible input.
When connecting or disconnecting anything in your AV
system, make sure the amplifier is switched off.
When using a graphic equalizer to emphasize loud sounds in
the high-frequency range, do not use excessive amplifier
volume.
Do not try to force a low-powered amplifier to produce loud
volumes of sound (the amplifier’s harmonic distortion will be
increased, and you may damage the tweeter).
Caution: installation
Do not place the speakers on an unstable surface. It could
present a hazard if it falls, as well as damaging the equip-
ment.
Switch off and unplug your AV equipment and consult the
instructions when connecting up components. Make sure you
use the correct connecting cables.
Do not put a TV or other AV equipment on top of these
speakers. It could present a hazard if it falls, as well as
damaging the equipment.
• Do not attach the speakers to the wall or ceiling, or place them
in a high location. If the speaker grilles are not properly
attached, they could fall off, causing injury.
Caution: in use
Don’t use the speakers to output distorted sound for long
periods of times. This can result in a fire hazard.
Do not sit or stand on the speakers or let children play on the
speakers.
Do not put large or heavy objects on top of the speakers.
WARNING: Handling the cord on this product or
cords associated with accessories sold with the
product will expose you to lead, a chemical known to
the State of California and other governmental
entities to cause cancer and birth defects or other
reproductive harm.
D36-P4_En
Wash hands after handling

Installing your speakers

Sounds played through speaker systems are easily affected in
subtle ways by the conditions in the listening space.
These speakers are bookshelf-type speakers which will give
their best performance when placed on a solid, level surface
off the floor. Placing the speakers directly on the floor will
result in boomy, undefined sound, and we strongly recom-
mend using speaker stands for optimal performance. Ideally,
the tweeters should be at about ear level when seated in your
listening position.
Do not attach these speakers to the wall or ceiling. They may
fall off and cause injury.
Pioneer cannot take responsibility for injuries or accidents
arising from improper mounting of these speakers on a wall or
ceiling.
Speakers are heavy, so make sure the surface where you
install the speakers is solid. For good sound, the speakers
should be about 20cm away from the back wall and at least
50cm away from the side wall.
50cm
20cm
*Illustration shows S-HF21-LR
If youre using these speakers for your TV sound, install them
at equal distances either side of the TV and point them in the
same direction as the TV.
If the room has a lot of reverberation, we recommend hanging
heavy fabric on the walls, and/or putting a carpet on the floor
to damp the sound. For best results, cover walls completely.
Do not place the speaker where they will be in direct sunlight,
and avoid positioning them near heaters and air conditioners.
This may cause warping and discoloration of the speaker
cabinet and damage the speakers.
These speakers are heavy. Placing them on an unstable
surface is dangerous, and should be avoided.
Not applicable to S-HF11C
Place the speakers equal distances from your listening
position for good stereo sound. Use speaker cords of the
same length for each speaker.
50 60º
*Illustration shows S-HF21-LR
www.pioneerelectronics.com

S-HF11C S-HF21-LR S-HF31-LR S-HF41-LR

OPERATING INSTRUCTIONS

SPEAKER SYSTEM

MODE D’EMPLOI

ENCEINTES ACOUSTIQUES

View the manual for the Pioneer S-HF41-LR here, for free. This manual comes under the category speakers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Pioneer S-HF41-LR or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Pioneer S-HF41-LR is a speaker that is designed to deliver high-quality audio for a range of applications. With its sleek and modern design, it can seamlessly integrate into any home or office environment. Featuring a two-way design, the S-HF41-LR incorporates a tweeter and woofer to provide a balanced and accurate sound reproduction. Whether you are listening to music, watching movies, or playing games, this speaker is capable of delivering clear and detailed audio. Constructed with premium materials, the S-HF41-LR is built to last. Its sturdy build ensures durability over time, so you can enjoy your favorite audio for years to come. The speaker is designed to provide a wide frequency response, capturing the intricacies of the audio and delivering it with precision. With its compact size, the S-HF41-LR can fit into tight spaces without sacrificing audio quality. Whether you are looking to augment your existing audio system or create a new setup, this speaker can easily fit into any configuration. The S-HF41-LR features a magnetically shielded enclosure, which allows you to place it near electronic devices without interference. This makes it a versatile option for use with computers, televisions, and other audio equipment. In conclusion, the Pioneer S-HF41-LR is a reliable and high-quality speaker that provides clear and accurate audio reproduction. Its durable construction and compact size make it a versatile choice for any audio setup.

General
BrandPioneer
ModelS-HF41-LR
Productspeaker
EAN0012562778433
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer S-HF41-LR below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Is the manual of the Pioneer S-HF41-LR available in English?

Yes, the manual of the Pioneer S-HF41-LR is available in English .

Is your question not listed? Ask your question here

No results