View the manual for the Pioneer S-11-P here, for free. This manual comes under the category speakers and has been rated by 1 people with an average of a 7.4. This manual is available in the following languages: English. Do you have a question about the Pioneer S-11-P or do you need help? Ask your question here
The Pioneer S-11-P is a speaker that offers high-quality audio performance. Designed with precision and attention to detail, this speaker delivers clear and precise sound reproduction across a wide range of frequencies. It is engineered to provide an immersive listening experience for music, movies, and other audio content. With its sleek and stylish design, the Pioneer S-11-P seamlessly integrates into any home audio setup. It features a compact size which makes it easy to place in any room without occupying much space. The speaker is also built with durable materials that ensure its longevity and reliability over time. Equipped with advanced technology, the Pioneer S-11-P offers enhanced audio features such as a wide frequency response and low distortion. This allows for the accurate reproduction of the original sound source, resulting in a more immersive and enjoyable listening experience. The Pioneer S-11-P has a versatile design that makes it compatible with a range of audio devices. It can be easily connected to smartphones, tablets, laptops, and other devices, providing a convenient and hassle-free audio solution. In summary, the Pioneer S-11-P is a high-quality speaker that delivers exceptional audio performance. With its sleek design and advanced features, it offers a versatile and immersive listening experience for a wide range of applications.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer S-11-P below.
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.
Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
To properly connect the Pioneer S-11-P speaker to your home cinema system, follow these steps: 1. Before making any connections, ensure that the power is switched off and disconnect the power cord from the AC outlet. 2. Connect the supplied speaker cord to the rear of each speaker. The speaker cord has a colored marker and a plain wire. Attach the wire with the colored marker to the red (+) terminal and the plain wire to the black (–) terminal. Press down the spring-loaded tab and insert the wire securely. 3. Connect the other end of each speaker cord to your receiver. Insert the colored wire into the matching positive (colored) terminal and the other wire into the negative (black) terminal of the receiver. Refer to the Operating Instructions of your receiver for specific guidance. 4. Ensure that the speaker cords are securely connected to the terminals by lightly pulling on them. Poor connections can result in noise and interruptions in the sound. 5. Take precautions to prevent electric shock when connecting or disconnecting the speaker cords. Disconnect the power cord before touching any uninsulated parts. 6. Verify that the polarity (+, –) of the speakers is correct. If using a set of speakers connected to a receiver, reversing the polarity of one speaker may affect the stereo effect. By following these steps, you can properly connect the Pioneer S-11-P speaker to your home cinema system.
If the Pioneer S-11-P speaker is not producing any sound, you can follow these steps to troubleshoot the issue: 1. Check the speaker wire connection: Ensure that the speaker wire is correctly connected to the speaker and the receiver. Make sure the wires are securely inserted into the appropriate terminals (red for positive, black for negative) on both ends. 2. Verify the receiver status: Ensure that the receiver is turned on and not in standby mode. Check the receiver's display or power indicator to confirm its operational status. 3. Adjust the volume control: Make sure the volume control on the receiver is not set to zero or at a very low level. Gradually increase the volume to a suitable level. 4. Check for signal distortion: If the sound is distorted, it could be due to extreme signal conditions. Lower the output level of the receiver, including volume, bass control, and bass boost, to reduce the distortion. 5. Automatic protection circuit: If the speakers suddenly stop producing sound, it may be due to an excessively large signal input, triggering the automatic protection circuit. Lower the volume to resume normal speaker output. By following these troubleshooting steps, you can identify and resolve the issue of the Pioneer S-11-P speaker not producing any sound.
To adjust the volume of the Pioneer S-11-P speaker, follow these steps: 1. Ensure that the speaker is connected to a compatible audio source, such as a receiver or amplifier. 2. Locate the volume control on the audio source device. This can typically be found on the front panel or remote control of the device. 3. Turn the volume control knob or press the volume up/down buttons to increase or decrease the volume level. 4. Gradually adjust the volume to your desired level. It is recommended to start with a lower volume and gradually increase it to avoid sudden loud sounds. 5. If the Pioneer S-11-P speaker is part of a home cinema system, you can also adjust the volume using the audio settings on the receiver or amplifier. Refer to the operating instructions of your specific audio source device for detailed guidance on adjusting the volume. By following these steps, you can easily adjust the volume of the Pioneer S-11-P speaker to your preferred level for an optimal listening experience.
If the Pioneer S-11-P speaker is not turning on, you can try the following steps to troubleshoot the issue: 1. Check the power connection: Ensure that the power cord is securely plugged into the speaker and the power outlet. Make sure the power outlet is functioning properly by testing it with another device. 2. Verify the power switch: Locate the power switch on the speaker and ensure it is in the "on" position. If the speaker has a standby mode, make sure it is not in standby mode. 3. Check the power source: If the speaker is powered by batteries, make sure the batteries are inserted correctly and have sufficient charge. If the speaker is powered by an external power supply, ensure that the power supply is connected properly and providing the correct voltage. 4. Reset the speaker: If the speaker has a reset button, try pressing it to reset the device. This can help resolve any temporary issues or glitches. 5. Seek professional assistance: If the speaker still does not turn on after following these steps, it is recommended to contact a Pioneer authorized service center or your dealer for further assistance and possible repair. By following these troubleshooting steps, you can address the issue of the Pioneer S-11-P speaker not turning on and potentially resolve the problem.
To register the Pioneer S-11-P speaker online at the Pioneer website, follow these steps: 1. Visit the Pioneer website. You can access it at http://www.pioneer.co.uk or http://www.pioneer.eu. 2. Look for the registration section on the website. It may be located under a "Support" or "Product Registration" tab. 3. Click on the registration link or button to proceed with the registration process. 4. Fill out the registration form with the required information. This may include your personal details, product information (such as model number and serial number), and purchase details. 5. Double-check the information you have entered to ensure its accuracy. 6. Submit the registration form. You may receive a confirmation message or email indicating that your registration has been successful. By following these steps, you can easily register your Pioneer S-11-P speaker online at the Pioneer website. Registering your product can provide benefits such as access to firmware updates, product support, and warranty services.
Yes, the manual of the Pioneer S-11-P is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Pioneer and is the answer not in the manual?
Question and answer
Number of questions: 1S-11-P sorronud speaker each how mach watts