Pioneer PN50-751-24U manual

Pioneer PN50-751-24U
7.5 · 1
PDF manual
 · 26 pages
English
manualPioneer PN50-751-24U
24

www.usca.pioneer-tv.com

LED TV

Legal notices

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.

Warning

Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.

Cables

Connections to this device must be made with shielded cables with
metallic RF/EMI connector hoods to maintain compliance with FCC
Rules and Regulations.

Canadian Notice

Analog and Digital Television Receiving Apparatus
– Appareil de réception de télévision analogique et numérique,
Canada BETS-7 / NTMR-7

IC Statement

This device complies with Industry Canada licence—exempt RSS
standard(s).
Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired
operation of the device.
This equipment complies with IC radiation exposure limits set forth for
an uncontrolled environment.

Restrictions in the 5 GHz band:

The device for operation in the band 5150-5250 MHz is only for indoor
use to reduce the potential for harmful interference to co-channel
mobile satellite systems.

Restrictions dans labande 5GHz:

Dans la bande 5150 – 5250MHz, les appareils seront restreints aux
opérations intérieurs pour réduire toute possibilité d'intérference
dangereuse aux operations du systèmes satellite mobile dans le
méme canal.

Dolby License Notice and Trademark Acknowledgment

Dolby, Dolby Vision, Dolby Audio, and the
double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
Manufactured under license from Dolby
Laboratories.
Confidential unpublished works. Copyright ©
1992-2022 Dolby Laboratories. All rights
reserved.
HDMI
The terms HDMI, HDMI High-Definition Multimedia
Interface, HDMI Trade dress and the HDMI Logos
are trademarks or registered trademarks of HDMI
Licensing Administrator, Inc.

View the manual for the Pioneer PN50-751-24U here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Pioneer PN50-751-24U or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 3
J
Joe RowlandMarch 29, 2024

Can I connect my Windows 10 laptop to the Pioneer PN50-751-24U via Bluetooth?

V
Violet March 19, 2024

What is the VESA pattern on tv

P
Pat PompeoApril 3, 2024

Is this TV monitor TAA compliant?

The Pioneer PN50-751-24U is a television with a screen size of 50 inches. This model features a resolution of 1920 x 1080 pixels, providing clear and detailed images. The television is equipped with multiple HDMI inputs, allowing for easy connectivity to various devices such as gaming consoles, Blu-ray players, and cable boxes. The PN50-751-24U also includes built-in smart TV capabilities, enabling access to a range of streaming services and online content. With a sleek design, the Pioneer PN50-751-24U blends seamlessly into any living room or entertainment space. The television is designed to deliver high-quality audio with its integrated speakers. Additionally, the PN50-751-24U comes with a remote control for convenient operation from a distance. Overall, the Pioneer PN50-751-24U offers a reliable and immersive viewing experience with its large screen, high resolution, and convenient features.

General
BrandPioneer
ModelPN50-751-24U
Producttelevision
EAN0600603301278
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer PN50-751-24U below.

What's the best viewing distance for my Pioneer television?

The ideal viewing distance for your Pioneer television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

How do I troubleshoot audio issues when connecting external speakers or a soundbar to the Pioneer PN50-751-24U television?

To troubleshoot audio issues when connecting external speakers or a soundbar to the Pioneer PN50-751-24U television, follow these steps: 1. Ensure that the TV's power cord is unplugged and the external speaker system or soundbar is turned off. 2. Connect a digital optical audio cable (not provided) from the digital output jack on the TV to the audio in jack on the external speaker system or soundbar. 3. Plug the TV's power cord into a power outlet and turn on the TV. 4. Turn on the external speaker system or soundbar and set it to the correct source according to the documentation that came with it. 5. If necessary, change the digital audio format by going to the Home menu, selecting Settings, then Picture and sound > audio settings > Digital audio output, and adjusting the setting to Auto, PCM, or Passthrough. 6. If you want to disable the TV's built-in speakers, go to the Home menu, select Settings, then Picture and sound > audio settings > Built-in speakers, and change the setting to OFF. For analog audio connections, follow similar steps but use an audio cable instead of a digital optical audio cable. Note that when connecting an analog speaker system or soundbar, the TV's built-in speakers will be muted. Please note that depending on the audio device you are connecting, you may need to adjust the digital audio format for the TV. The default setting is usually Auto. (Source: Pioneer PN50-751-24U Television Manual, pages 16-17)

What should I do if the Pioneer PN50-751-24U television does not power on after connecting it to a power source?

If your Pioneer PN50-751-24U television does not power on after connecting it to a power source, you can try the following steps: 1. Check that the power cord is securely plugged into a working outlet. 2. Unplug the power cord from the television, wait for 60 seconds, then plug it back in and turn on the TV. 3. If a "no signal" error message is displayed, press the Home button on your remote control, navigate to the INPUTS row, and select the input you want to watch. 4. If there are no channels after performing an Auto Channel Search, contact your cable or satellite TV provider to ensure proper reception. Also, make sure that the antenna or cable/satellite TV is securely connected to your TV. You can try replacing the cable between the antenna/cable or cable/satellite box and your TV. 5. If one or more channels do not display, use the remote control that came with your cable or satellite box to change channels. Alternatively, press the Home button, navigate to the INPUTS row, and ensure that you have selected the correct input for the device or service you are trying to use. 6. If you are having trouble with your password (PIN) for parental controls and viewing restrictions, press the Home button, select Settings, then go to Parental Controls and reset the parental controls password. 7. If your TV keeps turning off, check if the sleep timer is turned on. Press the Settings button, select Screen Saver/Sleep timer, and change the settings to Off. These steps should help you troubleshoot and resolve the issue of your Pioneer PN50-751-24U television not powering on after connecting it to a power source.

How do I troubleshoot issues with programming a universal remote control to work with the Pioneer PN50-751-24U television?

To troubleshoot issues with programming a universal remote control to work with the Pioneer PN50-751-24U television, follow these steps: 1. If you do not know the remote control code: - Contact the universal remote control maker. - OR contact the cable or satellite company that provided the remote control you are trying to program. 2. Follow your universal remote control's instructions to enter the TV code you found in Step 1. If your universal remote control has a code search feature, you can run a code search to identify a code that matches your TV. Refer to your universal remote control's instructions for details. Alternatively, if your universal remote control has a "Learn" feature, you can manually program it using the Pioneer TV remote to "teach" the commands one at a time. Again, refer to your universal remote control's instructions for details. Make sure to always operate your TV from the power source indicated on the label. When not in use for an extended period of time, unplug the power cord from the power outlet. If the power cord is permanently attached to your TV, do not attempt to unplug it. Note: These troubleshooting steps are specific to the Pioneer PN50-751-24U television.

Is the manual of the Pioneer PN50-751-24U available in English?

Yes, the manual of the Pioneer PN50-751-24U is available in English .

Is your question not listed? Ask your question here

No results