Pioneer PN50-751-24U manual

Pioneer PN50-751-24U
7.5 · 1
PDF manual
 · 26 pages
English
manualPioneer PN50-751-24U
19
www.usca.pioneer-tv.com
LED TV

Setting up your TV

If you use an Ethernet cable to connect to the Internet, see Connecting to Ethernet on page 14.
1 Make sure that you have connected the power cord to your TV and that you turned on your TV.
2 Make sure that you have installed the batteries in your new Voice Remote.
3 Make sure that your remote is paired with your TV. Pairing should occur automatically.
If you have issues, press (Home). If you continue to have issues, try re-inserting your batteries or replacing them, then
repeat this step again.
If you have an issue with pairing your remote:
1. Press Settings (with your remote pointed towards your TV).
2. Scroll down and select Remote.
3. Scroll down and select Pair your remote to your TV and follow the onscreen instructions.
4. If pairing fails, turn off your TV and unplug it from the power source, then try the pairing remote steps again. Afterwards,
plug the TV back in and turn on the TV. Repeat the pairing remote steps 1 to 3.
4 Select your Wi-Fi network from the networks displayed on the screen.
5 You’ll be prompted to create a Xumo TV account when you set up your TV. You’ll need an email address and password.
You’ll also need to add a credit or debit card as your payment method to make purchases on your TV.

Maintaining

Do not use your TV in areas that are too hot or too cold, because the cabinet may warp or the screen may malfunction. Your
TV works best in temperatures that are comfortable to you.
Do not place your TV in direct sunlight or near a heat source.

Cleaning the TV cabinet

Clean the cabinet with a soft, lint-free cloth. If the cabinet is especially dirty, moisten a soft, lint-free cloth in a weak detergent
solution, squeeze the excess moisture from the cloth, then wipe the cabinet with the cloth. Use a clean cloth to dry the cabinet.

Cleaning the TV screen

Clean the screen with a soft, lint-free cloth.

Troubleshooting

Video and audio

Note: If your Wi-Fi network is password protected, have your Wi-Fi network password handy to connect your TV to the Internet. If your
network is hidden, press Settings, select Connect to a private network, and then enter your network name. If required, enter your
network password using the on-screen keyboard.
PROBLEM SOLUTION
Picture does not fill the screen.
There are black bars around the
picture.
Press Settings, select Picture and sound \ Zoom settings, then change the
settings as needed.
No picture (screen is not lit) and
no sound.
Press (power) on the TV or the remote control.
Make sure that the video cables are connected correctly and securely to your TV.
Make sure that the power cord is plugged into a working outlet.
Press Home, then navigate to the INPUTS row and select the input you want to
watch.
Try another channel. The station may be experiencing problems.
Make sure that the incoming signal is compatible.
Make sure that the antenna or cable TV is connected correctly and securely. See
Connecting a cable or satellite box on page 10 or Connecting an antenna or
cable TV (no box) on page 11.

View the manual for the Pioneer PN50-751-24U here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Pioneer PN50-751-24U or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 3
J
Joe RowlandMarch 29, 2024

Can I connect my Windows 10 laptop to the Pioneer PN50-751-24U via Bluetooth?

V
Violet March 19, 2024

What is the VESA pattern on tv

P
Pat PompeoApril 3, 2024

Is this TV monitor TAA compliant?

The Pioneer PN50-751-24U is a television with a screen size of 50 inches. This model features a resolution of 1920 x 1080 pixels, providing clear and detailed images. The television is equipped with multiple HDMI inputs, allowing for easy connectivity to various devices such as gaming consoles, Blu-ray players, and cable boxes. The PN50-751-24U also includes built-in smart TV capabilities, enabling access to a range of streaming services and online content. With a sleek design, the Pioneer PN50-751-24U blends seamlessly into any living room or entertainment space. The television is designed to deliver high-quality audio with its integrated speakers. Additionally, the PN50-751-24U comes with a remote control for convenient operation from a distance. Overall, the Pioneer PN50-751-24U offers a reliable and immersive viewing experience with its large screen, high resolution, and convenient features.

General
BrandPioneer
ModelPN50-751-24U
Producttelevision
EAN0600603301278
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer PN50-751-24U below.

What's the best viewing distance for my Pioneer television?

The ideal viewing distance for your Pioneer television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

How do I troubleshoot audio issues when connecting external speakers or a soundbar to the Pioneer PN50-751-24U television?

To troubleshoot audio issues when connecting external speakers or a soundbar to the Pioneer PN50-751-24U television, follow these steps: 1. Ensure that the TV's power cord is unplugged and the external speaker system or soundbar is turned off. 2. Connect a digital optical audio cable (not provided) from the digital output jack on the TV to the audio in jack on the external speaker system or soundbar. 3. Plug the TV's power cord into a power outlet and turn on the TV. 4. Turn on the external speaker system or soundbar and set it to the correct source according to the documentation that came with it. 5. If necessary, change the digital audio format by going to the Home menu, selecting Settings, then Picture and sound > audio settings > Digital audio output, and adjusting the setting to Auto, PCM, or Passthrough. 6. If you want to disable the TV's built-in speakers, go to the Home menu, select Settings, then Picture and sound > audio settings > Built-in speakers, and change the setting to OFF. For analog audio connections, follow similar steps but use an audio cable instead of a digital optical audio cable. Note that when connecting an analog speaker system or soundbar, the TV's built-in speakers will be muted. Please note that depending on the audio device you are connecting, you may need to adjust the digital audio format for the TV. The default setting is usually Auto. (Source: Pioneer PN50-751-24U Television Manual, pages 16-17)

What should I do if the Pioneer PN50-751-24U television does not power on after connecting it to a power source?

If your Pioneer PN50-751-24U television does not power on after connecting it to a power source, you can try the following steps: 1. Check that the power cord is securely plugged into a working outlet. 2. Unplug the power cord from the television, wait for 60 seconds, then plug it back in and turn on the TV. 3. If a "no signal" error message is displayed, press the Home button on your remote control, navigate to the INPUTS row, and select the input you want to watch. 4. If there are no channels after performing an Auto Channel Search, contact your cable or satellite TV provider to ensure proper reception. Also, make sure that the antenna or cable/satellite TV is securely connected to your TV. You can try replacing the cable between the antenna/cable or cable/satellite box and your TV. 5. If one or more channels do not display, use the remote control that came with your cable or satellite box to change channels. Alternatively, press the Home button, navigate to the INPUTS row, and ensure that you have selected the correct input for the device or service you are trying to use. 6. If you are having trouble with your password (PIN) for parental controls and viewing restrictions, press the Home button, select Settings, then go to Parental Controls and reset the parental controls password. 7. If your TV keeps turning off, check if the sleep timer is turned on. Press the Settings button, select Screen Saver/Sleep timer, and change the settings to Off. These steps should help you troubleshoot and resolve the issue of your Pioneer PN50-751-24U television not powering on after connecting it to a power source.

How do I troubleshoot issues with programming a universal remote control to work with the Pioneer PN50-751-24U television?

To troubleshoot issues with programming a universal remote control to work with the Pioneer PN50-751-24U television, follow these steps: 1. If you do not know the remote control code: - Contact the universal remote control maker. - OR contact the cable or satellite company that provided the remote control you are trying to program. 2. Follow your universal remote control's instructions to enter the TV code you found in Step 1. If your universal remote control has a code search feature, you can run a code search to identify a code that matches your TV. Refer to your universal remote control's instructions for details. Alternatively, if your universal remote control has a "Learn" feature, you can manually program it using the Pioneer TV remote to "teach" the commands one at a time. Again, refer to your universal remote control's instructions for details. Make sure to always operate your TV from the power source indicated on the label. When not in use for an extended period of time, unplug the power cord from the power outlet. If the power cord is permanently attached to your TV, do not attempt to unplug it. Note: These troubleshooting steps are specific to the Pioneer PN50-751-24U television.

Is the manual of the Pioneer PN50-751-24U available in English?

Yes, the manual of the Pioneer PN50-751-24U is available in English .

Is your question not listed? Ask your question here

No results