Pioneer PN43-751-24U manual

Pioneer PN43-751-24U
8.3 · 1
PDF manual
 · 26 pages
English
manualPioneer PN43-751-24U
8
www.usca.pioneer-tv.com
LED TV

Jacks

Your TV may have any of the following items:
ITEM DESCRIPTION FUNCTION
Power/Input button
Power—Turns TV power on or off. When your TV is off, the LED
indicator on the front of your TV lights red.
Warning: When your TV is off, power still flows through it. To
completely disconnect power, unplug the power cord.
Input—Quickly press and release to open the Input Selection list,
press one or more times to select a video input source, then wait a
few seconds. Your TV switches to the source you selected.
Digital OPTICAL output
jack
Connect a sound bar, digital speaker system, or home theater system
to this jack to listen to TV audio through external speakers. See
Digital audio on page 16.
Headphone jack
OR
AUDIO OUT jack
On some TVs the headphone jack and audio out jack are combined
into one jack.
Connect headphones, a sound bar, analog speaker system, or a
home theater system to this jack to listen to TV audio through
external speakers. See Analog audio on page 17.
Antenna/Cable in jack
Connect an antenna or cable TV to this jack. See Coaxial (good) on
page 11 or Connecting an antenna or cable TV (no box) on page 11.
Analog video and audio
(AV) jacks
Connect the video and audio for an AV device to these jacks. See AV
(good) on page 10, 12, or 13.
USB
Connect a USB flash drive to this jack to view compatible JPEG
picture files and media playback support files. See Connecting a USB
flash drive on page 15.
HDMI
Connect an HDMI device to this jack. See HDMI (best) on page 10, 12,
or 13, or Connecting a computer on page 14.
HDMI/eARC/ARC
Connect an eARC/ARC-enabled home theater receiver to this jack.
OR
Connect an HDMI device to this jack. See HDMI (best) on page 10, 12,
or 13, or Connecting a computer on page 14.
ETHERNET
Connect an Ethernet cable to this jack and to an Ethernet
connection.
CAUTIONS:
Check the jacks for position and type before making any connections.
Loose connections can cause poor audio or video quality. Make sure that all connections are tight and secure.
The external audio/video equipment shown may be different from your equipment. If you have questions, refer to the documentation
that came with your equipment.
Always unplug the power cord when connecting external equipment.
LAN

View the manual for the Pioneer PN43-751-24U here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the Pioneer PN43-751-24U or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 2
J
James JeckerMay 24, 2024

default text size for the pioneer 43 windows monitor

R
Randy Ivanov April 21, 2024

Need help purchasing a sound bar for my pioneer pn43-751-24u

The Pioneer PN43-751-24U television is a model known for its 43-inch screen size and 4K resolution, offering clear and detailed images. This television features a slim design that fits well in various living spaces. With built-in Wi-Fi connectivity, users can easily access online streaming services and browse the internet. The PN43-751-24U also comes equipped with multiple HDMI and USB ports for connecting external devices such as gaming consoles or Blu-ray players. The audio quality of this television is enhanced by integrated speakers, providing a decent sound experience for users. The PN43-751-24U is designed to be user-friendly with intuitive controls and a straightforward setup process. Overall, this television offers a standard viewing experience with its combination of screen size, resolution, connectivity options, and audio capabilities.

General
BrandPioneer
ModelPN43-751-24U
Producttelevision
EAN0600603301261
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer PN43-751-24U below.

What's the best viewing distance for my Pioneer television?

The ideal viewing distance for your Pioneer television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What should I do if the power cord is not connecting properly to the TV?

To ensure the power cord connects properly to your Pioneer PN43-751-24U television, follow these steps: 1. Make sure the TV's power cord is unplugged. 2. Turn off the television. 3. Check the power cord for any damage or debris. 4. Align the power cord connector with the TV's power input port. 5. Apply gentle pressure and push the power cord connector firmly into the power input port. 6. Listen for a click or feel a secure connection. 7. Plug the power cord into a power outlet. 8. Turn on the television and check if it powers up correctly. By following these steps, you can ensure that the power cord is securely connected to your Pioneer PN43-751-24U television.

How can I find the correct TV code for my universal remote control if I don't know it?

To find the correct TV code for your Pioneer PN43-751-24U television with a universal remote control: 1. Contact the universal remote control maker or the cable/satellite company that provided the remote control for the TV code. 2. Follow the instructions provided by your universal remote control to enter the TV code obtained in Step 1. 3. If your universal remote control has a code search feature, use it to identify a matching TV code. Refer to the remote control's manual for details. 4. Alternatively, if your universal remote control has a "Learn" feature, manually program it by using the Pioneer TV remote to teach the commands one by one. Check the remote control's instructions for guidance.

How do I program a universal remote control using the "Learn" feature with the Pioneer TV remote?

1. If you do not know the remote control code, contact the universal remote control maker or the cable/satellite company that provided the remote control. 2. Follow your universal remote control's instructions to enter the TV code you found. 3. If your universal remote control has a "Learn" feature, you can manually program it using the Pioneer TV remote to teach the commands one at a time. 4. See your universal remote control's instructions for details on how to use the "Learn" feature. 5. Make sure to operate your TV only from the specified power source and unplug the power cord when not in use for an extended period. 6. Avoid trying to unplug the power cord if it is permanently attached to your TV.

Is the manual of the Pioneer PN43-751-24U available in English?

Yes, the manual of the Pioneer PN43-751-24U is available in English .

Is your question not listed? Ask your question here

No results