Pioneer PN43-751-24U manual

Pioneer PN43-751-24U
8.3 · 1
PDF manual
 · 26 pages
English
manualPioneer PN43-751-24U
5
www.usca.pioneer-tv.com
LED TV
If the existing television set is going to be retained and
relocated, the same considerations as above should be
applied.
Lightning
For added protection for your device receiver during a
lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the power outlet
and disconnect any antenna or cable system. This helps
prevent property damage and personal injury from
lightning and power line surges.
Power lines
An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, take
extreme care to keep from touching such power lines or
circuits as contact with them might be fatal.
Handling the LCD panel
Your TV’s screen is made of glass. Do not drop your TV
or hit, jolt, or press hard against the LCD panel. If the
screen breaks, be careful of broken glass.
If the LCD panel is broken, make absolutely sure that
you do not touch the liquid in the panel. This may
cause skin inflammation.
If the liquid gets in your mouth, immediately gargle,
rinse, and consult with your doctor. Also, if the liquid
gets in your eyes or touches your skin, consult with
your doctor after rinsing for at least 15 minutes or
longer in clean water.
Replacement parts
When replacement parts are required, make sure that the
service technician uses replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, personal injury, or other hazards.
Safety check
After completing any service or repair to this device, ask
the service technician to perform routine safety checks to
determine that your TV is in correct operating condition.
Power source
Operate your TV only from the type of power source
indicated on the marking label. If you are not sure of the
type of power supplied to your home, consult an
electrician or your local power company.
Servicing
These servicing instructions are for use by qualified service
personnel only. To reduce the risk of electric shock, do not
perform any servicing other than that contained in the
operating instructions unless you are qualified to do so.

CAUTION

Damage requiring service
Unplug this TV from the power outlet and refer servicing
to qualified service personnel under the following
conditions:
When the power supply cord or plug is damaged or
frayed.
If liquid has been spilled or objects have fallen into
your TV.
If your TV has been exposed to rain or water.
If your TV does not operate normally by following the
operating instructions. Adjust only those controls
covered by the operating instructions because
incorrect adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore your TV to its normal
operation.
If your TV has been dropped or damaged in any way.
When your TV exhibits a distinct change in
performance.
Outdoor antenna grounding
If an outside antenna or cable system is connected to your
TV, make sure that the antenna or cable system is
grounded to provide some protection against voltage
surges and built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA No. 70, provides
information with respect to correct grounding of the mast
and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding conductors,
location of the antenna-discharge unit, connection to
grounding electrodes, and requirements for the grounding
electrode.
Note to CATV system installer
Article 820 of the National Electrical Code, ANSI/NFPA No.
40 provides guidance for correct grounding. Specifically, it
states that the cable ground must be connected to the
grounding system of the building as close to the point of
cable entry as practical.
Antenna lead-in wire
Grounding clamp
Antenna discharge
unit
Grounding
conductors
Ground clamps
Power service
grounding electrode
system
Electric service
equipment
1
2
3
4
5
6
7

View the manual for the Pioneer PN43-751-24U here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the Pioneer PN43-751-24U or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 2
J
James JeckerMay 24, 2024

default text size for the pioneer 43 windows monitor

R
Randy Ivanov April 21, 2024

Need help purchasing a sound bar for my pioneer pn43-751-24u

The Pioneer PN43-751-24U television is a model known for its 43-inch screen size and 4K resolution, offering clear and detailed images. This television features a slim design that fits well in various living spaces. With built-in Wi-Fi connectivity, users can easily access online streaming services and browse the internet. The PN43-751-24U also comes equipped with multiple HDMI and USB ports for connecting external devices such as gaming consoles or Blu-ray players. The audio quality of this television is enhanced by integrated speakers, providing a decent sound experience for users. The PN43-751-24U is designed to be user-friendly with intuitive controls and a straightforward setup process. Overall, this television offers a standard viewing experience with its combination of screen size, resolution, connectivity options, and audio capabilities.

General
BrandPioneer
ModelPN43-751-24U
Producttelevision
EAN0600603301261
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer PN43-751-24U below.

What's the best viewing distance for my Pioneer television?

The ideal viewing distance for your Pioneer television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What should I do if the power cord is not connecting properly to the TV?

To ensure the power cord connects properly to your Pioneer PN43-751-24U television, follow these steps: 1. Make sure the TV's power cord is unplugged. 2. Turn off the television. 3. Check the power cord for any damage or debris. 4. Align the power cord connector with the TV's power input port. 5. Apply gentle pressure and push the power cord connector firmly into the power input port. 6. Listen for a click or feel a secure connection. 7. Plug the power cord into a power outlet. 8. Turn on the television and check if it powers up correctly. By following these steps, you can ensure that the power cord is securely connected to your Pioneer PN43-751-24U television.

How can I find the correct TV code for my universal remote control if I don't know it?

To find the correct TV code for your Pioneer PN43-751-24U television with a universal remote control: 1. Contact the universal remote control maker or the cable/satellite company that provided the remote control for the TV code. 2. Follow the instructions provided by your universal remote control to enter the TV code obtained in Step 1. 3. If your universal remote control has a code search feature, use it to identify a matching TV code. Refer to the remote control's manual for details. 4. Alternatively, if your universal remote control has a "Learn" feature, manually program it by using the Pioneer TV remote to teach the commands one by one. Check the remote control's instructions for guidance.

How do I program a universal remote control using the "Learn" feature with the Pioneer TV remote?

1. If you do not know the remote control code, contact the universal remote control maker or the cable/satellite company that provided the remote control. 2. Follow your universal remote control's instructions to enter the TV code you found. 3. If your universal remote control has a "Learn" feature, you can manually program it using the Pioneer TV remote to teach the commands one at a time. 4. See your universal remote control's instructions for details on how to use the "Learn" feature. 5. Make sure to operate your TV only from the specified power source and unplug the power cord when not in use for an extended period. 6. Avoid trying to unplug the power cord if it is permanently attached to your TV.

Is the manual of the Pioneer PN43-751-24U available in English?

Yes, the manual of the Pioneer PN43-751-24U is available in English .

Is your question not listed? Ask your question here

No results