Pioneer PN43-751-24U manual

Pioneer PN43-751-24U
8.3 · 1
PDF manual
 · 26 pages
English
manualPioneer PN43-751-24U
19
www.usca.pioneer-tv.com
LED TV

Setting up your TV

If you use an Ethernet cable to connect to the Internet, see Connecting to Ethernet on page 14.
1 Make sure that you have connected the power cord to your TV and that you turned on your TV.
2 Make sure that you have installed the batteries in your new Voice Remote.
3 Make sure that your remote is paired with your TV. Pairing should occur automatically.
If you have issues, press (Home). If you continue to have issues, try re-inserting your batteries or replacing them, then
repeat this step again.
If you have an issue with pairing your remote:
1. Press Settings (with your remote pointed towards your TV).
2. Scroll down and select Remote.
3. Scroll down and select Pair your remote to your TV and follow the onscreen instructions.
4. If pairing fails, turn off your TV and unplug it from the power source, then try the pairing remote steps again. Afterwards,
plug the TV back in and turn on the TV. Repeat the pairing remote steps 1 to 3.
4 Select your Wi-Fi network from the networks displayed on the screen.
5 You’ll be prompted to create a Xumo TV account when you set up your TV. You’ll need an email address and password.
You’ll also need to add a credit or debit card as your payment method to make purchases on your TV.

Maintaining

Do not use your TV in areas that are too hot or too cold, because the cabinet may warp or the screen may malfunction. Your
TV works best in temperatures that are comfortable to you.
Do not place your TV in direct sunlight or near a heat source.

Cleaning the TV cabinet

Clean the cabinet with a soft, lint-free cloth. If the cabinet is especially dirty, moisten a soft, lint-free cloth in a weak detergent
solution, squeeze the excess moisture from the cloth, then wipe the cabinet with the cloth. Use a clean cloth to dry the cabinet.

Cleaning the TV screen

Clean the screen with a soft, lint-free cloth.

Troubleshooting

Video and audio

Note: If your Wi-Fi network is password protected, have your Wi-Fi network password handy to connect your TV to the Internet. If your
network is hidden, press Settings, select Connect to a private network, and then enter your network name. If required, enter your
network password using the on-screen keyboard.
PROBLEM SOLUTION
Picture does not fill the screen.
There are black bars around the
picture.
Press Settings, select Picture and sound \ Zoom settings, then change the
settings as needed.
No picture (screen is not lit) and
no sound.
Press (power) on the TV or the remote control.
Make sure that the video cables are connected correctly and securely to your TV.
Make sure that the power cord is plugged into a working outlet.
Press Home, then navigate to the INPUTS row and select the input you want to
watch.
Try another channel. The station may be experiencing problems.
Make sure that the incoming signal is compatible.
Make sure that the antenna or cable TV is connected correctly and securely. See
Connecting a cable or satellite box on page 10 or Connecting an antenna or
cable TV (no box) on page 11.

View the manual for the Pioneer PN43-751-24U here, for free. This manual comes under the category televisions and has been rated by 1 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the Pioneer PN43-751-24U or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 2
J
James JeckerMay 24, 2024

default text size for the pioneer 43 windows monitor

R
Randy Ivanov April 21, 2024

Need help purchasing a sound bar for my pioneer pn43-751-24u

The Pioneer PN43-751-24U television is a model known for its 43-inch screen size and 4K resolution, offering clear and detailed images. This television features a slim design that fits well in various living spaces. With built-in Wi-Fi connectivity, users can easily access online streaming services and browse the internet. The PN43-751-24U also comes equipped with multiple HDMI and USB ports for connecting external devices such as gaming consoles or Blu-ray players. The audio quality of this television is enhanced by integrated speakers, providing a decent sound experience for users. The PN43-751-24U is designed to be user-friendly with intuitive controls and a straightforward setup process. Overall, this television offers a standard viewing experience with its combination of screen size, resolution, connectivity options, and audio capabilities.

General
BrandPioneer
ModelPN43-751-24U
Producttelevision
EAN0600603301261
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer PN43-751-24U below.

What's the best viewing distance for my Pioneer television?

The ideal viewing distance for your Pioneer television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What should I do if the power cord is not connecting properly to the TV?

To ensure the power cord connects properly to your Pioneer PN43-751-24U television, follow these steps: 1. Make sure the TV's power cord is unplugged. 2. Turn off the television. 3. Check the power cord for any damage or debris. 4. Align the power cord connector with the TV's power input port. 5. Apply gentle pressure and push the power cord connector firmly into the power input port. 6. Listen for a click or feel a secure connection. 7. Plug the power cord into a power outlet. 8. Turn on the television and check if it powers up correctly. By following these steps, you can ensure that the power cord is securely connected to your Pioneer PN43-751-24U television.

How can I find the correct TV code for my universal remote control if I don't know it?

To find the correct TV code for your Pioneer PN43-751-24U television with a universal remote control: 1. Contact the universal remote control maker or the cable/satellite company that provided the remote control for the TV code. 2. Follow the instructions provided by your universal remote control to enter the TV code obtained in Step 1. 3. If your universal remote control has a code search feature, use it to identify a matching TV code. Refer to the remote control's manual for details. 4. Alternatively, if your universal remote control has a "Learn" feature, manually program it by using the Pioneer TV remote to teach the commands one by one. Check the remote control's instructions for guidance.

How do I program a universal remote control using the "Learn" feature with the Pioneer TV remote?

1. If you do not know the remote control code, contact the universal remote control maker or the cable/satellite company that provided the remote control. 2. Follow your universal remote control's instructions to enter the TV code you found. 3. If your universal remote control has a "Learn" feature, you can manually program it using the Pioneer TV remote to teach the commands one at a time. 4. See your universal remote control's instructions for details on how to use the "Learn" feature. 5. Make sure to operate your TV only from the specified power source and unplug the power cord when not in use for an extended period. 6. Avoid trying to unplug the power cord if it is permanently attached to your TV.

Is the manual of the Pioneer PN43-751-24U available in English?

Yes, the manual of the Pioneer PN43-751-24U is available in English .

Is your question not listed? Ask your question here

No results