Pioneer PDP-R06G manual

Pioneer PDP-R06G
7.9 · 13
PDF manual
 · 209 pages
English
manualPioneer PDP-R06G
7
En

Important User Guidance Information

01
English

CAUTION

PIONEER bears no responsibility for any damage arising from
incorrect use of the product by you or other people,
malfunctions when in use, other product related problems,
and use of the product except in cases where the company
must be liable.

Plasma Display protection function

When still images (such as photos and computer images) stay
on the screen for an extended period of time, the screen will be
slightly dimmed. This is because the protection function of the
Plasma Display automatically adjusts the brightness to protect
the screen when detecting still images; so this does not
designate malfunction. The screen is dimmed when a still
image is detected for about three minutes.

Information of pixel defect

Plasma screens display information using pixels. Pioneer
plasma display panels contain a very large number of pixels.
(Depending on the panel size; over 2.3 million cells in case of a
43 inch display, over 2.9 million pixels in case of a 50 inch
display, over 3.1 million cells in case of a 61 inch display). All
Pioneer display panels are manufactured using a very high
level of ultra-precision technology and undergo individual
quality control.
In rare cases, some pixels can be permanently switched off, or
on, resulting in either a black or colored pixel permanently fixed
on the screen.
This effect is common to all plasma displays because it is a
consequence of the technology.
If the defective pixels are visible at a normal viewing distance
of between 2.5 and 3.5 meters while viewing a normal
broadcast (i.e. not a test card, still image or single color
display) please contact the supplying dealer.
If, however, they can only be seen close up or during single
color displays then this is considered normal for this
technology.

Infrared rays

The Plasma Display releases infrared rays because of its
characteristics. Depending on how the Plasma Display is in
use, the remote controls of nearby equipment may be
adversely affected or wireless headphones using infrared rays
are interfered by noise. If this is the case, place that equipment
at a location where its remote control sensor is not affected.

Radio interference

While this product meets the required specifications, it emits a
small amount of noise. If you place such equipment as an AM
radio, personal computer, and VCR close to this product, that
equipment may be interfered. If this happens, place that
equipment far enough from this product.

Plasma Display driving sound

The screen of the Plasma Display is composed of extremely
fine pixels and these pixels emit light according to received
video signals. This principle may make you hear buzz sound or
electrical circuit hamming from the Plasma Display.
Also note that the rotation speed of the cooling fan motor
increases when the ambient temperature of the Media
Receiver becomes high. You may hear the sound of the fan
motor at that time.

Do not attach such items as labels and tape to the

product.

This may result in the discoloration or scratch of the cabinet.

When not using the product for a long period of

time
If you do not use the product for a long period of time, the
functions of the product may be adversely affected. Switch
on and run the product occasionally.

Condensation

Condensation may take place on the surface or inside of the
product when the product is rapidly moved from a cold place
to a warm place or just after a heater is switched on in winter
morning, for example. When condensation takes place, do
not switch on the product and wait until condensation
disappears. Using the product with condensation may result
in malfunction.

Cleaning the surface of the screen and the glossy

surface of the front cabinet

When cleaning the surface of the screen or the glossy
surface of the front cabinet, gently wipe it with a dry soft
cloth; the supplied cleaning cloth or other similar cloths
(e.g., cotton and flannel). If you use a dusty or hard cloth or
if you rub the screen hard, the surface of the product will be
scratched.
If you clean the surface of the screen with a wet cloth, water
droplets on the surface may enter into the product, resulting
in malfunction.

Cleaning the cabinet

When cleaning the cabinet of this product, gently wipe it
with a clean soft cloth (e.g., cotton and flannel). If you use a
dusty or hard cloth or if you rub the cabinet hard, the surface
of the cabinet will be scratched.
The cabinet of this product is mostly composed of plastic. Do
not use chemicals such as benzene or thinner to clean the
cabinet. Using these chemicals may result in quality
deterioration or coating removal.
Do not expose the product to volatile gas or fluid such as
pesticide. Do not make the product contact with rubber or
vinyl products for a long period of time. The effect of
plasticizer in the plastic may result in quality deterioration or
coating removal.
If you clean the surface of the cabinet with a wet cloth, water
droplets on the surface may enter into the product, resulting
in malfunction.

Handles at the rear of the Plasma Display

Do not remove the handles from the rear of the Plasma
Display.
When moving the Plasma Display, ask another person for
help and use the handles attached to the rear of the Plasma
Display. Do not move the Plasma Display by holding only a
single handle. Use the handles as shown.
Do not use the handles to hang the product when installing
or carrying the product, for example. Do not use the handles
for the purpose of preventing the product from tilting over.
PDP506HDG.book Page 7 Monday, June 27, 2005 12:57 PM

View the manual for the Pioneer PDP-R06G here, for free. This manual comes under the category televisions and has been rated by 13 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Pioneer PDP-R06G or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 37
A
Alexandru Paul GorganFebruary 14, 2021

Hello, I have a Pioneer plasma display model PDP 436PE and I have no idea how to connect it to which device to see if it works properly. Thank you.

This message has been automatically translated
R
ryanMay 31, 2015

Hi iv got a plasma display system model no PDP -RO6G and I'm struggling to connect my pc via vga...any advice?

J
JamesJune 19, 2015

Hi I'm getting video but no audio with my Apple TV. I'm using hdmi. Any idea what it could be?

L
LeoOctober 10, 2015

I have the new Foxtel iq3 and I have the pioneer PDP-R06G receiver and I want to know how do I select the hdmi option on my TV

J
JamesOctober 10, 2015

The TV won't show any channels. I am wondering how we set it up from the very start. We have a wall Arial and all the wires needed. Just can't seem to get any channels.

S
SimonDecember 4, 2015

Hi there I have a 50" pioneer plasma that turns on and runs great for 15 mins or so then turns off blinking the red light 12 times. Give it a break and try again and last seconds then switches off. Anyone had this before and a has a remedy ?

M
M.ThangamaniOctober 30, 2016

Dear sir, I have a Pioneer plasma TX (PDP-506PG, bought in 2006) with a media box PDP-RO6G. , when I switch on after 5 seconds, and then the TV goes off with the red standby light on constantly,how to check monitor are working condition good and receiver side good. please send details. after change stand by mode receiver cooling fans stopped. Thanks and regards. M.Thangamani

C
chosenOctober 17, 2017

Please how i order the parts of Pioneer, Mode: PDP-R06G, Product:Plasma TV. I need the information of ordering the board inside the Plasma Display Unit

G
GiriNovember 12, 2017

Hello, My Media Receiver PDP-R06G is having problems. The "On" button doesn't work, and so are the channel and volume buttons not working. The input buttons, when pressed, switches off/on the TV alternatively. It seems some IC is malfunctioning. How do I troubleshoot? Thanks, Nayak

C
CassDecember 29, 2019

Hi our Pioneer Media Receiver PDP R06G sound was working perfectly fine then decides one day to just stop.. only using the HDMI input.. any ideas on what has happened or how to fix?

The Pioneer PDP-R06G is a television model that was released in the past. It features a sleek design and is suitable for home or office use. The television offers a flat screen display, providing a clear and crisp image quality. The PDP-R06G has a sizeable screen, which allows for an immersive viewing experience. It is equipped with high-definition technology, which enhances the picture quality and provides vibrant colors. The television also has a wide viewing angle, ensuring that the image remains clear and consistent from various positions in the room. This model offers multiple input options, allowing for versatile connectivity with various devices. It includes HDMI and component video inputs, as well as a PC input, enabling users to connect their computers or gaming consoles for an enhanced multimedia experience. The PDP-R06G also features built-in speakers, eliminating the need for external audio devices. The sound quality is clear and loud, providing an enjoyable audio experience for the viewers. Furthermore, this television incorporates energy-saving features, ensuring efficient power consumption. It also includes a remote control for convenient navigation and access to various functions. While specific technical specifications may vary, the Pioneer PDP-R06G undoubtedly offers a reliable and high-quality television viewing experience.

General
BrandPioneer
ModelPDP-R06G
Producttelevision
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer PDP-R06G below.

What's the best viewing distance for my Pioneer television?

The ideal viewing distance for your Pioneer television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

How do I connect external devices to my Pioneer PDP-R06G television?

To connect external devices, utilize the available HDMI ports at the back of your TV. Simply plug in the HDMI cable from your device, such as a gaming console or DVD player, into one of the HDMI ports on the TV.

Why is the picture on my television screen not centered properly?

Adjust the picture settings using the on-screen menu by pressing the Menu button on your remote control. Navigate to the "Picture" or "Display" settings and locate the option to adjust picture position. Use the arrow keys to center the picture on the screen.

How can I improve the sound quality of my television?

Access the audio settings through the on-screen menu by pressing Menu on your remote control. Look for the "Audio" or "Sound" options and explore the equalizer settings to fine-tune bass, treble, and other audio parameters according to your preference.

Why does my television remote control not work?

Ensure that the batteries in your remote control are properly installed and functional. If the issue persists, try replacing the batteries. Additionally, check for any obstructions between the remote control and the TV sensor, as well as make sure the remote is pointed towards the sensor on the TV.

How do I set up parental controls on my Pioneer PDP-R06G television?

Access the parental control settings by pressing Menu on your remote control and navigating to the "Settings" or "Setup" menu. Look for the "Parental Controls" or "Child Lock" option and follow the prompts to set a PIN and customize the desired restrictions for content and channels.

Is the manual of the Pioneer PDP-R06G available in English?

Yes, the manual of the Pioneer PDP-R06G is available in English .

Is your question not listed? Ask your question here

No results