Pioneer PDP-R06G manual

Pioneer PDP-R06G
7.9 · 13
PDF manual
 · 209 pages
English
manualPioneer PDP-R06G
21
En

Basic Operations

06
English

Basic Operations

Unless you set up TV channels that you can watch under the
current conditions, you cannot tune in those channels. For the
procedure, see “Setting up TV channels automatically” on page
27.

Turning on/ off the power

NOTE
When the Media Receiver is plugged into a power outlet, it is
placed into the standby mode; the STANDBY indicator on its
front panel should flash red. The Media Receiver stays in the
standby mode unless it is unplugged from the power outlet.
To turn on the system, press POWER on the Plasma Display.
The POWER ON indicators on the Plasma Display and Media
Receiver light up in blue.
To turn off the system, press a on the remote control unit or
STANDBY/ON on the Media Receiver.
The Plasma Display and Media Receiver are placed into the
standby mode; their respective STANDBY indicators light up
in red.
You can then turn on the system again by pressing a or 0 to
9 on the remote control unit or STANDBY/ON on the Media
Receiver. If you press 0 on the remote control unit, images
come from the INPUT 1 source. If you press 1 to 9, TV images
display.
You can also press POWER on the Plasma Display to turn off
the system. However, you cannot then turn on the system
again by pressing the buttons on the remote control unit and
Media Receiver.
NOTE
If you are not going to use the Plasma Display System for a
long period of time, be sure to remove the power cord from
the power outlet.
When the system is placed into the standby mode, the main
power flow is cut and the system is no longer fully
operational. A minute flow of power feeds the system to
maintain operation readiness.

Plasma Display

Media Receiver

Plasma Display/Media Receiver status indicators

The table below shows the operational status of the Plasma
Display System. You can check the current status of the system
with the indicators on the Plasma Display and Media Receiver.
For other than the above, see “Troubleshooting” on page 50.
STANDBY indicator
POWER ON indicator
POWER
button
ON STANDBY
STANDBY
/
ON
PULL
OPEN
1 2 3 4
PC
INPUT
1 2 3
4 5 6
7 8 9
CH
RETURN
CH
ENTER
0
STANDBY indicator
POWER ON indicator
STANDBY/ON
button
Indicator Status System Status
Plasma Display Media Receiver
POWER ON STANDBY POWER ON STANDBY
The power cords of both the Plasma Display and the Media Receiver have been
disconnected. Or, the power cord of the Plasma Display has been connected but
the POWER button of the Plasma Display is off.
Power to the system is on.
The system is in the standby mode.
Flashing
The power cord of the Media Receiver has been disconnected.
Flashing
Power to the Plasma Display is off. Or the power cord of the Plasma Display has
been disconnected.
PDP506HDG.book Page 21 Monday, June 27, 2005 12:57 PM

View the manual for the Pioneer PDP-R06G here, for free. This manual comes under the category televisions and has been rated by 13 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Pioneer PDP-R06G or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 37
A
Alexandru Paul GorganFebruary 14, 2021

Hello, I have a Pioneer plasma display model PDP 436PE and I have no idea how to connect it to which device to see if it works properly. Thank you.

This message has been automatically translated
R
ryanMay 31, 2015

Hi iv got a plasma display system model no PDP -RO6G and I'm struggling to connect my pc via vga...any advice?

J
JamesJune 19, 2015

Hi I'm getting video but no audio with my Apple TV. I'm using hdmi. Any idea what it could be?

L
LeoOctober 10, 2015

I have the new Foxtel iq3 and I have the pioneer PDP-R06G receiver and I want to know how do I select the hdmi option on my TV

J
JamesOctober 10, 2015

The TV won't show any channels. I am wondering how we set it up from the very start. We have a wall Arial and all the wires needed. Just can't seem to get any channels.

S
SimonDecember 4, 2015

Hi there I have a 50" pioneer plasma that turns on and runs great for 15 mins or so then turns off blinking the red light 12 times. Give it a break and try again and last seconds then switches off. Anyone had this before and a has a remedy ?

M
M.ThangamaniOctober 30, 2016

Dear sir, I have a Pioneer plasma TX (PDP-506PG, bought in 2006) with a media box PDP-RO6G. , when I switch on after 5 seconds, and then the TV goes off with the red standby light on constantly,how to check monitor are working condition good and receiver side good. please send details. after change stand by mode receiver cooling fans stopped. Thanks and regards. M.Thangamani

C
chosenOctober 17, 2017

Please how i order the parts of Pioneer, Mode: PDP-R06G, Product:Plasma TV. I need the information of ordering the board inside the Plasma Display Unit

G
GiriNovember 12, 2017

Hello, My Media Receiver PDP-R06G is having problems. The "On" button doesn't work, and so are the channel and volume buttons not working. The input buttons, when pressed, switches off/on the TV alternatively. It seems some IC is malfunctioning. How do I troubleshoot? Thanks, Nayak

C
CassDecember 29, 2019

Hi our Pioneer Media Receiver PDP R06G sound was working perfectly fine then decides one day to just stop.. only using the HDMI input.. any ideas on what has happened or how to fix?

The Pioneer PDP-R06G is a television model that was released in the past. It features a sleek design and is suitable for home or office use. The television offers a flat screen display, providing a clear and crisp image quality. The PDP-R06G has a sizeable screen, which allows for an immersive viewing experience. It is equipped with high-definition technology, which enhances the picture quality and provides vibrant colors. The television also has a wide viewing angle, ensuring that the image remains clear and consistent from various positions in the room. This model offers multiple input options, allowing for versatile connectivity with various devices. It includes HDMI and component video inputs, as well as a PC input, enabling users to connect their computers or gaming consoles for an enhanced multimedia experience. The PDP-R06G also features built-in speakers, eliminating the need for external audio devices. The sound quality is clear and loud, providing an enjoyable audio experience for the viewers. Furthermore, this television incorporates energy-saving features, ensuring efficient power consumption. It also includes a remote control for convenient navigation and access to various functions. While specific technical specifications may vary, the Pioneer PDP-R06G undoubtedly offers a reliable and high-quality television viewing experience.

General
BrandPioneer
ModelPDP-R06G
Producttelevision
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer PDP-R06G below.

What's the best viewing distance for my Pioneer television?

The ideal viewing distance for your Pioneer television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

How do I connect external devices to my Pioneer PDP-R06G television?

To connect external devices, utilize the available HDMI ports at the back of your TV. Simply plug in the HDMI cable from your device, such as a gaming console or DVD player, into one of the HDMI ports on the TV.

Why is the picture on my television screen not centered properly?

Adjust the picture settings using the on-screen menu by pressing the Menu button on your remote control. Navigate to the "Picture" or "Display" settings and locate the option to adjust picture position. Use the arrow keys to center the picture on the screen.

How can I improve the sound quality of my television?

Access the audio settings through the on-screen menu by pressing Menu on your remote control. Look for the "Audio" or "Sound" options and explore the equalizer settings to fine-tune bass, treble, and other audio parameters according to your preference.

Why does my television remote control not work?

Ensure that the batteries in your remote control are properly installed and functional. If the issue persists, try replacing the batteries. Additionally, check for any obstructions between the remote control and the TV sensor, as well as make sure the remote is pointed towards the sensor on the TV.

How do I set up parental controls on my Pioneer PDP-R06G television?

Access the parental control settings by pressing Menu on your remote control and navigating to the "Settings" or "Setup" menu. Look for the "Parental Controls" or "Child Lock" option and follow the prompts to set a PIN and customize the desired restrictions for content and channels.

Is the manual of the Pioneer PDP-R06G available in English?

Yes, the manual of the Pioneer PDP-R06G is available in English .

Is your question not listed? Ask your question here

No results