Pioneer PDP-R06G manual

Pioneer PDP-R06G
7.9 · 13
PDF manual
 · 209 pages
English
manualPioneer PDP-R06G
50
ChH
附錄
12
附錄
故障排除

如果以下的錯誤碼出現在螢幕上,請在表格裡確認雷同的項目。

故障 解決辦法
沒有電源 確認電漿電視螢幕和媒體接收器連接正確。(參閱第 17 頁)
電源線是否沒有連接? (參閱第 20 頁)
主電源是否打開? (參閱第 21 頁)
檢查是否按下了遙控器上的 0 9 按鈕或 a 按鈕。(參閱第 21 頁)
如果系統指示燈亮起紅燈,請按下遙控器上的 0 9 按鈕或 a 按鈕。
藍色和紅色的矩形交錯在螢幕上。 檢查系統連接線是否被拔出或幾乎被拔出? (參閱第 17 頁)
系統無法操作。 受到外界影響,例如燈光、靜電等,可能導致無法正常操作。如果出現此種情況,請在第一次打開電漿電
視螢幕和媒體接收器電源後再行操作、或拔出電源線並在 1 2 分鐘後重新插上。
遙控器無法工作。 電池是否按極性 (+,-)對齊了插入? (參閱第 19 頁)
電池是否已經電量耗盡?請更換新電池。(參閱第 19 頁)
操作遙控器時請對準電漿電視上的遙控感知器。(參閱第 19 頁)
您是否在強光或螢光燈下使用?
是否有螢光照射到遙控感知器上?
沒有圖像和聲音。 檢查是否當您想觀看電視頻道時,無意中選擇了視頻或電腦作為輸入源。(參閱第 22 頁)
檢查您是否選擇了帶有親子鎖定的頻道。(參閱第 29 頁)
輸入密碼來臨時解鎖。(參閱第 41 頁)
確認訊號線跟天線已連接好。 ( 請參考 20 )
確認訊號線和其他設備已連接好。 ( 請參考 44 頁到 49 )
沒有圖像。 其他組件的連接是否正確? (參閱第 44 到第 49 頁)
是否輸入了不相容的電腦訊號? (參閱第 46 頁)
有影像無聲音。 檢查音量是否被設定到最小。(參閱第 22 頁)
檢查音量是否關閉。(參閱第 22 頁)
當使用視頻或電腦作為輸入源時,請檢查音頻端子是否連接。(參閱第 44 47 頁)
檢查出現故障的電視頻道的聲音系統。(參閱第 28 頁)
重新選擇正確的聲音系統。
聲音左右聲道顛倒。
只有一個揚聲器有聲音。
檢查揚聲器連接線的連接是否左右顛倒或是否有某一個揚聲器連接線沒有連接。(參閱第 12 頁和第 18 頁)
是否正確調整了平衡? (參閱第 35 頁)
圖像被截斷。 影像位置是否正確? (參閱第 38 頁)
是否選擇正確的螢幕尺寸? (參閱第 39 頁)
奇怪的彩色、亮彩色、黑色或彩色錯
位。
調節圖像色調。(參閱第 32 34 頁)
房間是否太亮?在太亮的房間裡面圖像會顯得比較暗。
檢查視頻系統設定。(參閱第 28 頁和第 39 頁)
電源突然關閉。 系統內部溫度升高。移除任何堵塞通風孔的物體或清潔系統。(參閱第 15 頁)
檢查電源控制設定。(參閱第 37 頁)
檢查睡眠定時器設定。(參閱第 40 頁)
面板聲音 / 噪音 即使面板有聲音,例如:風扇馬達的噪音、電子迴路的聲響、顯示板的噪聲,但都是正確操作磷光顯示
器。
代號 訊息 檢查項目
SD04 電源關閉。內部溫度太高。
請檢查 PDP 周圍的溫度。
檢查電漿電視周圍的溫度是否過高。
SD05 電源關閉。內部保護電路激活,揚聲器電纜是否短路? 檢查電漿電視和揚聲器之間的連接線。
SD11 電源關閉。內部溫度太高。
請檢查媒體接收器周圍的溫度。
檢查電漿電視螢幕和媒體接收器周圍的溫度是否過高。
PDP506HDG.book Page 50 Monday, June 27, 2005 4:36 PM

View the manual for the Pioneer PDP-R06G here, for free. This manual comes under the category televisions and has been rated by 13 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Pioneer PDP-R06G or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 37
A
Alexandru Paul GorganFebruary 14, 2021

Hello, I have a Pioneer plasma display model PDP 436PE and I have no idea how to connect it to which device to see if it works properly. Thank you.

This message has been automatically translated
R
ryanMay 31, 2015

Hi iv got a plasma display system model no PDP -RO6G and I'm struggling to connect my pc via vga...any advice?

J
JamesJune 19, 2015

Hi I'm getting video but no audio with my Apple TV. I'm using hdmi. Any idea what it could be?

L
LeoOctober 10, 2015

I have the new Foxtel iq3 and I have the pioneer PDP-R06G receiver and I want to know how do I select the hdmi option on my TV

J
JamesOctober 10, 2015

The TV won't show any channels. I am wondering how we set it up from the very start. We have a wall Arial and all the wires needed. Just can't seem to get any channels.

S
SimonDecember 4, 2015

Hi there I have a 50" pioneer plasma that turns on and runs great for 15 mins or so then turns off blinking the red light 12 times. Give it a break and try again and last seconds then switches off. Anyone had this before and a has a remedy ?

M
M.ThangamaniOctober 30, 2016

Dear sir, I have a Pioneer plasma TX (PDP-506PG, bought in 2006) with a media box PDP-RO6G. , when I switch on after 5 seconds, and then the TV goes off with the red standby light on constantly,how to check monitor are working condition good and receiver side good. please send details. after change stand by mode receiver cooling fans stopped. Thanks and regards. M.Thangamani

C
chosenOctober 17, 2017

Please how i order the parts of Pioneer, Mode: PDP-R06G, Product:Plasma TV. I need the information of ordering the board inside the Plasma Display Unit

G
GiriNovember 12, 2017

Hello, My Media Receiver PDP-R06G is having problems. The "On" button doesn't work, and so are the channel and volume buttons not working. The input buttons, when pressed, switches off/on the TV alternatively. It seems some IC is malfunctioning. How do I troubleshoot? Thanks, Nayak

C
CassDecember 29, 2019

Hi our Pioneer Media Receiver PDP R06G sound was working perfectly fine then decides one day to just stop.. only using the HDMI input.. any ideas on what has happened or how to fix?

The Pioneer PDP-R06G is a television model that was released in the past. It features a sleek design and is suitable for home or office use. The television offers a flat screen display, providing a clear and crisp image quality. The PDP-R06G has a sizeable screen, which allows for an immersive viewing experience. It is equipped with high-definition technology, which enhances the picture quality and provides vibrant colors. The television also has a wide viewing angle, ensuring that the image remains clear and consistent from various positions in the room. This model offers multiple input options, allowing for versatile connectivity with various devices. It includes HDMI and component video inputs, as well as a PC input, enabling users to connect their computers or gaming consoles for an enhanced multimedia experience. The PDP-R06G also features built-in speakers, eliminating the need for external audio devices. The sound quality is clear and loud, providing an enjoyable audio experience for the viewers. Furthermore, this television incorporates energy-saving features, ensuring efficient power consumption. It also includes a remote control for convenient navigation and access to various functions. While specific technical specifications may vary, the Pioneer PDP-R06G undoubtedly offers a reliable and high-quality television viewing experience.

General
BrandPioneer
ModelPDP-R06G
Producttelevision
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer PDP-R06G below.

What's the best viewing distance for my Pioneer television?

The ideal viewing distance for your Pioneer television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

How do I connect external devices to my Pioneer PDP-R06G television?

To connect external devices, utilize the available HDMI ports at the back of your TV. Simply plug in the HDMI cable from your device, such as a gaming console or DVD player, into one of the HDMI ports on the TV.

Why is the picture on my television screen not centered properly?

Adjust the picture settings using the on-screen menu by pressing the Menu button on your remote control. Navigate to the "Picture" or "Display" settings and locate the option to adjust picture position. Use the arrow keys to center the picture on the screen.

How can I improve the sound quality of my television?

Access the audio settings through the on-screen menu by pressing Menu on your remote control. Look for the "Audio" or "Sound" options and explore the equalizer settings to fine-tune bass, treble, and other audio parameters according to your preference.

Why does my television remote control not work?

Ensure that the batteries in your remote control are properly installed and functional. If the issue persists, try replacing the batteries. Additionally, check for any obstructions between the remote control and the TV sensor, as well as make sure the remote is pointed towards the sensor on the TV.

How do I set up parental controls on my Pioneer PDP-R06G television?

Access the parental control settings by pressing Menu on your remote control and navigating to the "Settings" or "Setup" menu. Look for the "Parental Controls" or "Child Lock" option and follow the prompts to set a PIN and customize the desired restrictions for content and channels.

Is the manual of the Pioneer PDP-R06G available in English?

Yes, the manual of the Pioneer PDP-R06G is available in English .

Is your question not listed? Ask your question here

No results