Pioneer PDP-R06G manual

Pioneer PDP-R06G
7.9 · 13
PDF manual
 · 209 pages
English
manualPioneer PDP-R06G
50
PoB

Apêndice

12

Apêndice

Localização e solução de problemas

Se os seguintes códigos de erro aparecerem na tela, verifique os itens correspondentes na tabela.
Problema Solução possível
Não alimentação. Certifique-se de que o monitor de plasma e o receiver de mídia estejam conectados corretamente. (Consulte
a página 17.)
O cabo de alimentação não está desconectado? (Consulte a página 20.)
A alimentação principal foi ligada? (Consulte a página 21.)
Verifique se pressionou os botões 0 – 9 ou a no controle remoto. (Consulte a página 21.)
Se o indicador no sistema estiver iluminado em vermelho, pressione 0 – 9 ou a no controle remoto.
Aparecem retângulos azuis e vermelhos
alternativamente na tela.
Verifique se o cabo de sistema não está desconectado ou quase desconectado? (Consulte a página 17.)
O sistema não pode ser operado. Influências externas como iluminação, eletricidade estática, etc., pode causar um mau funcionamento.
Neste caso, opere o sistema depois de ligar o monitor de plasma e o receiver de mídia, ou desconecte o
cabo e alimentação e conecte-o de novo depois de 1 ou 2 minutos.
O controle remoto não funciona. As pilhas estão instaladas com as polaridades (+, –) nas direções corretas? (Consulte a página 19.)
As pilhas não estão esgotadas? Troque por pilhas novas. (Consulte a página 19.)
Opere o controle remoto apontando-o para o sensor de controle remoto no monitor de plasma. (Consulte a
página 19.)
Está utilizando-o sob uma iluminação forte ou fluorescente?
Há reflexão de luz fluorescente no sensor de controle remoto?
Não há imagem nem áudio. Verifique se a fonte de entrada para vídeo ou PC não foi selecionada desintecionalmente embora você
quissesse assistir um canal de TV. (Consulte a página 22.)
Verifique se não selecionou um canal bloqueado com o bloqueio parental. (Consulte a página 29.)
Introduza uma senha para cancelar o bloqueio parental temporariamente. (Consulte a página 41.)
Verifique a conexão do cabo com a antena. (Consulte a página 20.)
Verifique a conexão do cabo com o outro equipamento. (Consulte as páginas 44 a 49.)
Não há imagem. As conexões com os outros componentes estão corretas? (Consulte as páginas 44 a 49.)
Um sinal de PC incompatível não está sendo introduzido? (Consulte a página 46.)
As imagens aparecem mas o áudio não
é produzido.
Verifique se não selecionou o volume mínimo. (Consulte a página 22.)
Verifique se não emudeceu o som. (Consulte a página 22.)
Quando utilizar um vídeo ou PC como a fonte de entrada, verifique se o terminal de áudio também está
conectado. (Consulte as páginas 44 a 47.)
Verifique o sistema de som selecionado para o canal de TV onde o problema ocorreu. (Consulte a página
28.)
Selecione de novo o sistema de som correto.
O som está invertido entre os canais
direito e esquerdo.
O som é produzido somente por uma
caixa acústica.
Verifique se as conexões dos cabos de alto-falante não estão invertidas entre os canais direito e esquerdo ou
se o cabo de alto-falante de qualquer caixa acústica não foi desconectado. (Consulte as páginas 12 e 18.)
O balanço foi ajustado corretamente? (Consulte a página 35.)
A imagem é cortada. A posição da imagem está correta? (Consulte as página 38.)
O tamanho de tela correto foi selecionado? (Consulte a página 39.)
Cor estranha, cor clara, cor escura ou
desajuste das cores.
Ajuste o tom da imagem. (Consulte as páginas 32 a 34.)
O ambiente não está muito brilhante? A imagem pode parecer escura em um ambiente muito brilhante.
Verifique a definição do sistema de cores. (Consulte as páginas 28 e 39.)
A alimentação é desligada
repentinamente.
A temperatura interna do sistema aumentou. Retire quaisquer objetos que estejam bloqueando as
aberturas de ventilação ou limpe as aberturas. (Consulte as página 15.)
Verifique a definição de controle de alimentação. (Consulte as página 37.)
Verifique a definição do temporizador. (Consulte a página 40.)
Sons/ruídos do painel Sons gerados pelo painel como, por exemplo: Ruído do motor do ventilador, zumbido do circuito elétrico/
zumbido do painel de vidro são normais em um monitor de matriz baseado em fósforo.
Código Mensagem Verifique
SD04 A desligar. Temperatura interna demasiado elevada.
Verifique a temperatura PDP.
Verifique se a temperatura ambiente do monitor de plasma está alta.
SD05 A desligar. Os circuitos de protecção interna estão
activados. Ocorreu uma diminuição do tamanho no cabo
das colunas?
Verifique as conexões dos cabos de alto-falante entre o monitor de plasma e as
caixas acústicas.
SD11 A desligar. Temperatura interna demasiado elevada.
Verifique a temperatura à volta do receptor.
Verifique se a temperatura ambiente do monitor de plasma e do receiver de mídia
está alta.
PDP506HDG_PoB.book Page 50 Friday, June 24, 2005 6:53 PM

View the manual for the Pioneer PDP-R06G here, for free. This manual comes under the category televisions and has been rated by 13 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Pioneer PDP-R06G or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 37
A
Alexandru Paul GorganFebruary 14, 2021

Hello, I have a Pioneer plasma display model PDP 436PE and I have no idea how to connect it to which device to see if it works properly. Thank you.

This message has been automatically translated
R
ryanMay 31, 2015

Hi iv got a plasma display system model no PDP -RO6G and I'm struggling to connect my pc via vga...any advice?

J
JamesJune 19, 2015

Hi I'm getting video but no audio with my Apple TV. I'm using hdmi. Any idea what it could be?

L
LeoOctober 10, 2015

I have the new Foxtel iq3 and I have the pioneer PDP-R06G receiver and I want to know how do I select the hdmi option on my TV

J
JamesOctober 10, 2015

The TV won't show any channels. I am wondering how we set it up from the very start. We have a wall Arial and all the wires needed. Just can't seem to get any channels.

S
SimonDecember 4, 2015

Hi there I have a 50" pioneer plasma that turns on and runs great for 15 mins or so then turns off blinking the red light 12 times. Give it a break and try again and last seconds then switches off. Anyone had this before and a has a remedy ?

M
M.ThangamaniOctober 30, 2016

Dear sir, I have a Pioneer plasma TX (PDP-506PG, bought in 2006) with a media box PDP-RO6G. , when I switch on after 5 seconds, and then the TV goes off with the red standby light on constantly,how to check monitor are working condition good and receiver side good. please send details. after change stand by mode receiver cooling fans stopped. Thanks and regards. M.Thangamani

C
chosenOctober 17, 2017

Please how i order the parts of Pioneer, Mode: PDP-R06G, Product:Plasma TV. I need the information of ordering the board inside the Plasma Display Unit

G
GiriNovember 12, 2017

Hello, My Media Receiver PDP-R06G is having problems. The "On" button doesn't work, and so are the channel and volume buttons not working. The input buttons, when pressed, switches off/on the TV alternatively. It seems some IC is malfunctioning. How do I troubleshoot? Thanks, Nayak

C
CassDecember 29, 2019

Hi our Pioneer Media Receiver PDP R06G sound was working perfectly fine then decides one day to just stop.. only using the HDMI input.. any ideas on what has happened or how to fix?

The Pioneer PDP-R06G is a television model that was released in the past. It features a sleek design and is suitable for home or office use. The television offers a flat screen display, providing a clear and crisp image quality. The PDP-R06G has a sizeable screen, which allows for an immersive viewing experience. It is equipped with high-definition technology, which enhances the picture quality and provides vibrant colors. The television also has a wide viewing angle, ensuring that the image remains clear and consistent from various positions in the room. This model offers multiple input options, allowing for versatile connectivity with various devices. It includes HDMI and component video inputs, as well as a PC input, enabling users to connect their computers or gaming consoles for an enhanced multimedia experience. The PDP-R06G also features built-in speakers, eliminating the need for external audio devices. The sound quality is clear and loud, providing an enjoyable audio experience for the viewers. Furthermore, this television incorporates energy-saving features, ensuring efficient power consumption. It also includes a remote control for convenient navigation and access to various functions. While specific technical specifications may vary, the Pioneer PDP-R06G undoubtedly offers a reliable and high-quality television viewing experience.

General
BrandPioneer
ModelPDP-R06G
Producttelevision
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer PDP-R06G below.

What's the best viewing distance for my Pioneer television?

The ideal viewing distance for your Pioneer television depends on the screen size. As a rule of thumb you can assume that approximately 2.4 times the screen diagonal is the ideal viewing distance.

My television has no signal anymore, now what?

If your television has no signal, you can check the following: - Check whether your television is set to the correct source. - Check if your TV receiver is properly connected via the HDMI or SCART input.

What screen dimensions does my television have?

The size of your television is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your television, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

How do I connect external devices to my Pioneer PDP-R06G television?

To connect external devices, utilize the available HDMI ports at the back of your TV. Simply plug in the HDMI cable from your device, such as a gaming console or DVD player, into one of the HDMI ports on the TV.

Why is the picture on my television screen not centered properly?

Adjust the picture settings using the on-screen menu by pressing the Menu button on your remote control. Navigate to the "Picture" or "Display" settings and locate the option to adjust picture position. Use the arrow keys to center the picture on the screen.

How can I improve the sound quality of my television?

Access the audio settings through the on-screen menu by pressing Menu on your remote control. Look for the "Audio" or "Sound" options and explore the equalizer settings to fine-tune bass, treble, and other audio parameters according to your preference.

Why does my television remote control not work?

Ensure that the batteries in your remote control are properly installed and functional. If the issue persists, try replacing the batteries. Additionally, check for any obstructions between the remote control and the TV sensor, as well as make sure the remote is pointed towards the sensor on the TV.

How do I set up parental controls on my Pioneer PDP-R06G television?

Access the parental control settings by pressing Menu on your remote control and navigating to the "Settings" or "Setup" menu. Look for the "Parental Controls" or "Child Lock" option and follow the prompts to set a PIN and customize the desired restrictions for content and channels.

Is the manual of the Pioneer PDP-R06G available in English?

Yes, the manual of the Pioneer PDP-R06G is available in English .

Is your question not listed? Ask your question here

No results