Pioneer PDA-V100HD manual

Pioneer PDA-V100HD
9.3 · 1
PDF manual
 · 212 pages
English
manualPioneer PDA-V100HD

View the manual for the Pioneer PDA-V100HD here, for free. This manual comes under the category audio / video converters and has been rated by 1 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Pioneer PDA-V100HD or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandPioneer
ModelPDA-V100HD | PDA-V100HD
Productaudio / video converter
EAN4977729865356, 5053731463243
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Width420 mm
Depth299 mm
Height90 mm
Weight3300 g
Video
Supported video modes1080i, 480p, 576p, 720p
Analog signal format systemNTSC 3.58, NTSC 4.43, PAL, PAL 60, SECAM
Maximum video resolution1920 x 1080 pixels
Ports & interfaces
Host interfaceHDMI, SCART, S-VIDEO, Component Video, Component Audio
Output interfaceHDMI
Packaging data
ManualYes
Power
Input voltage220 - 240 V
Input frequency50 - 60 Hz
Operating voltage12 V
Features
Product colorBlack
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer PDA-V100HD below.

What is the weight of the Pioneer PDA-V100HD?

The Pioneer PDA-V100HD has a weight of 3300 g.

What is the height of the Pioneer PDA-V100HD?

The Pioneer PDA-V100HD has a height of 90 mm.

What is the width of the Pioneer PDA-V100HD?

The Pioneer PDA-V100HD has a width of 420 mm.

What is the depth of the Pioneer PDA-V100HD?

The Pioneer PDA-V100HD has a depth of 299 mm.

What are the supported video modes of the Pioneer PDA-V100HD?

The supported video modes of the Pioneer PDA-V100HD are 1080i, 480p, 576p, and 720p. This allows users to experience high-definition video playback at various resolutions.

Does the Pioneer PDA-V100HD have an HDMI output interface?

Yes, the Pioneer PDA-V100HD is equipped with an HDMI output interface. This means users can easily connect the converter to compatible devices for seamless audio and video transmission.

Which analog signal format systems are supported by the Pioneer PDA-V100HD?

The Pioneer PDA-V100HD supports the analog signal format systems NTSC 3.58, NTSC 4.43, PAL, PAL 60, and SECAM. This wide range of compatibility ensures compatibility with different regions and devices.

What is the maximum video resolution of the Pioneer PDA-V100HD?

The maximum video resolution of the Pioneer PDA-V100HD is 1920 x 1080 pixels. This allows for high-quality playback of Full HD content, delivering sharp and vibrant visuals.

Does the Pioneer PDA-V100HD come with a manual?

Yes, the Pioneer PDA-V100HD is accompanied by a manual. This provides users with important instructions and information on how to operate the converter effectively, enhancing the user experience.

How do I switch between different operating modes on the Pioneer PDA-V100HD audio/video converter?

To switch between different operating modes on the Pioneer PDA-V100HD audio/video converter, follow these steps: 1. Make sure the unit is powered on and in normal operation mode. 2. Look for the HDMI CONTROL indicators on the unit. These indicators are located on the left and right sides and are colored orange and green. 3. Press the INPUT button on the unit or the remote control to cycle through the available operating modes. Each press of the INPUT button will switch to the next mode. 4. Pay attention to the indicators to determine the current operating mode. The currently selected input will be indicated by a blue illumination. 5. Continue pressing the INPUT button until you reach the desired operating mode. The available modes may include PDP combination mode, Independent 1 mode, and Independent 2 mode. 6. Once you have selected the desired operating mode, the unit will be ready to use in that mode. Note: The specific steps and indicators may vary slightly depending on the settings and configuration of your Pioneer PDA-V100HD audio/video converter.

What should I do if the unit is not functioning properly as an AV selector with my Pioneer plasma television?

If the Pioneer PDA-V100HD audio/video converter is not functioning properly as an AV selector with your Pioneer plasma television, follow these steps: 1. Check the HDMI CONTROL switch on the rear panel of the unit. Make sure it is set to ON if you want to use the HDMI Control function for linked operation with the television. If you don't want to use the HDMI Control function, leave the switch set to OFF. 2. Access the "HDMI Control Setting" menu on your Pioneer plasma television. Set the television to permit control of the unit if you want to use the HDMI Control function. This will allow you to use the television's remote control for normal operations on the unit. 3. If you are using the HDMI Control function, use the remote control unit furnished with the Pioneer plasma television to change input selections (INPUT 1 to INPUT 5) and to power on/off the unit. The unit's power will be linked to the television's power. 4. If you are not using the HDMI Control function, you can still use the unit as an AV selector. In this case, the INPUT button on the unit or its remote control can be used to switch the unit's corresponding inputs (INPUT 1 to INPUT 6). Note: Make sure to follow the specific settings and conditions mentioned in the manual for proper operation of the unit with your Pioneer plasma television.

How do I connect the Pioneer PDA-V100HD audio/video converter to a non-Pioneer television?

To connect the Pioneer PDA-V100HD audio/video converter to a non-Pioneer television, follow these steps: 1. Locate the OUTPUT connector (HDMI) on the rear panel of the Pioneer PDA-V100HD. 2. Connect one end of an HDMI cable to the OUTPUT connector of the Pioneer PDA-V100HD. 3. Locate the HDMI input port on your non-Pioneer television. It is usually labeled as "HDMI IN" or "HDMI". 4. Connect the other end of the HDMI cable to the HDMI input port of your non-Pioneer television. 5. Make sure both the Pioneer PDA-V100HD and the non-Pioneer television are powered on. 6. Use the television's remote control to select the HDMI input source corresponding to the HDMI input port you connected the Pioneer PDA-V100HD to. 7. The audio and video signals from the Pioneer PDA-V100HD should now be displayed on your non-Pioneer television. Note: If you encounter any issues with the connection or the display, make sure to check the HDMI cable for any damage or try using a different HDMI input port on your television.

What should I do if the HDMI Control function is not working in the Independent 1 mode?

If the HDMI Control function is not working in the Independent 1 mode of the Pioneer PDA-V100HD audio/video converter, you can try the following steps: 1. Check the HDMI CONTROL switch on the rear panel of the unit. Make sure it is set to ON for the HDMI Control function to work in the Independent 1 mode. 2. Ensure that the input component connected to the unit's HDMI input (INPUT 1, 3, or 4) is sending a video signal. The unit will automatically turn on and switch the input selector to allow output of the image from the connected component. 3. Verify if the power off linkage is supported by the other connected components. The ability to link the power off command depends on the functional support of the connected components. 4. Use the INPUT button on the Pioneer PDA-V100HD unit or its remote control to switch between the corresponding INPUT 1 to INPUT 6. This will allow you to select the desired input component. Note: Make sure to follow the specific settings mentioned in the manual for proper operation of the HDMI Control function in the Independent 1 mode.

How do I switch inputs on the Pioneer PDA-V100HD audio/video converter when the HDMI Control function is not used in the Independent 2 mode?

To switch inputs on the Pioneer PDA-V100HD audio/video converter when the HDMI Control function is not used in the Independent 2 mode, follow these steps: 1. Locate the INPUT button on the Pioneer PDA-V100HD unit or its remote control. 2. Press the INPUT button to cycle through the available input options. Each press of the INPUT button will switch to the next input. 3. Pay attention to the indicators on the unit to determine the current input selection. The currently selected input will be indicated by a blue illumination. 4. Continue pressing the INPUT button until you reach the desired input. The available inputs may include INPUT 1 to INPUT 6. 5. Once you have selected the desired input, the Pioneer PDA-V100HD will be ready to receive and display the audio/video signals from the corresponding input source. Note: Make sure to connect the desired input source to the corresponding input port on the Pioneer PDA-V100HD before switching inputs. Also, ensure that the input source is powered on and sending a video signal for proper operation.

Is the manual of the Pioneer PDA-V100HD available in English?

Yes, the manual of the Pioneer PDA-V100HD is available in English .

Is your question not listed? Ask your question here

No results