Pioneer PD-50-S manual

Pioneer PD-50-S
6.7 · 3
PDF manual
 · 116 pages
English
manualPioneer PD-50-S

Operating Instructions | Mode d’emploi | Bedienungsanleitung |

Istruzioni per I’uso | Handleiding | Manual de instrucciones |

Инструкции по эксплуатации

Super Audio CD Player | Lecteur Super Audio CD |
Super Audio CD-Spieler | Lettore CD Super Audio |
Super-Audio CD-speler | Reproductor de Super Audio CD |

PD-50-K/-S

PD-50_PWSYXZT8.book 1 ページ 2012年7月6日 金曜日 午前11時12分

View the manual for the Pioneer PD-50-S here, for free. This manual comes under the category CD players and has been rated by 3 people with an average of a 6.7. This manual is available in the following languages: English. Do you have a question about the Pioneer PD-50-S or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Pioneer PD-50-S cd-player boasts an impressive Signal-to-Noise Ratio of 117 dB, Total Harmonic Distortion of 0.0020 %, and a Dynamic range of 108 dB. It supports various audio formats including AAC, MP3, and WMA, and allows for playback of CD-RW and CD-R discs. The PD-50-S features a single deck with tray disc loading, rotary volume control, and does not include a CD changer. Designed for superior sound quality, this Super Audio CD player incorporates Rigid Under Base technology, an aluminium front panel, Direct Construction with Separate Shield Structure, and Twin Transformers. The Hi-bit DSP technology ensures high-precision processing, while Auto Level Control equalizes volume differences between tracks. Additionally, the player is compatible with Direct Stream Digital (DSD) audio files and can be connected to iPod/iPhone/iPad devices for enhanced sound output. With a front USB port for easy access to music files stored on a USB memory stick, the PD-50-S also features Sound Retriever technology to enhance the clarity of compressed audio files. Other highlights include a Pure Audio Listening mode, iPod/iPhone/iPad charging capabilities, and availability in Black and Silver color options.

General
BrandPioneer
ModelPD-50-S | PD-50-S
ProductCD-player
EAN4988028160646, 0498802816064
LanguageEnglish
FiletypeUser manual (PDF)
Audio
Signal-to-Noise Ratio (SNR)117 dB
Total Harmonic Distortion (THD)0.0020 %
Frequency range4 - 50000 Hz
Dynamic range108 dB
Audio formats supportedAAC, MP3, WMA
Media types
CD-RW playbackYes
CD-R playbackYes
Features
MP3 playbackYes
CD changerNo
File typeMP3, WMA, AAC, MPEG-4
Device type-
Disc loading typeTray
Number of decks1 deck(s)
Product colorSilver
Display
Display type-
Management features
Volume controlRotary
Handheld remote controlYes
Ports & interfaces
USB 2.0 ports quantity1
Audio output1
Digital audio coaxial out1
Digital audio optical out1
Power
Power consumption (typical)41 W
Power requirements220 - 240V AC
Power consumption (standby)0.45 W
Other features
Dimensions (WxDxH)435 x 329 x 130 mm
Weight & dimensions
Weight7800 g
Depth329 mm
Height130 mm
Width435 mm
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer PD-50-S below.

What is the weight of the Pioneer PD-50-S?

The Pioneer PD-50-S has a weight of 7800 g.

How can I best clean my CD-player?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is the height of the Pioneer PD-50-S?

The Pioneer PD-50-S has a height of 130 mm.

What is the width of the Pioneer PD-50-S?

The Pioneer PD-50-S has a width of 435 mm.

What is the depth of the Pioneer PD-50-S?

The Pioneer PD-50-S has a depth of 329 mm.

Does the Pioneer PD-50-S support playback of CD-RW discs?

Yes, the Pioneer PD-50-S supports playback of CD-RW discs. This means that users can enjoy their favorite music burned onto CD-RW discs without any compatibility issues.

How many audio formats does the Pioneer PD-50-S support?

The Pioneer PD-50-S supports AAC, MP3, and WMA audio formats. This versatility allows users to enjoy a wide range of music files without the need for conversion.

Does the Pioneer PD-50-S come with a remote control?

Yes, the Pioneer PD-50-S comes with a remote control included. This provides convenient and easy control over the CD player from a distance, enhancing the user experience.

How many USB 2.0 ports does the Pioneer PD-50-S have?

The Pioneer PD-50-S has one USB 2.0 port. This allows users to connect and play music from external storage devices, such as USB flash drives, for added convenience and flexibility.

What type of disc loading does the Pioneer PD-50-S have?

The Pioneer PD-50-S has a tray disc loading type. This traditional loading mechanism ensures smooth and reliable disc insertion and removal, providing a user-friendly experience.

How do I connect the Pioneer PD-50-S CD-player to an audio system?

To connect the Pioneer PD-50-S CD-player to an audio system, follow these steps: 1. Make sure the power is switched off and disconnect the power cord from the AC outlet before making any connections. 2. For analog audio output connections, use an audio cable (included) to connect the PD-50-S CD-player's analog audio output to the analog audio input of your amplifier. This will allow you to enjoy analog audio produced by the CD-player through the amplifier. 3. For digital audio output connections, you can connect the PD-50-S CD-player's digital audio output to an AV amplifier or digital recording device using either an optical fiber cable or a coaxial digital audio cable (both commercially available). Note that the digital output does not support sound from SACD and DSD discs, nor from iPod/iPhone/iPad devices. 4. If you want to use the PD-50-S CD-player as a D/A converter, you can connect the digital audio output of a digital audio component to the PD-50-S CD-player's digital audio input. This allows you to use the PD-50-S CD-player to convert the digital audio signals to analog audio signals. 5. If you have other Pioneer components equipped with CONTROL IN/OUT jacks, you can use a commercially available monaural miniplug cord to connect the PD-50-S CD-player's CONTROL IN jack to the CONTROL OUT jack of the other Pioneer component. This allows you to control multiple components with a single remote control. Please note that these instructions are based on the Pioneer PD-50-S CD-player manual and may vary depending on your specific audio system setup.

Why is the CD player not turning on?

If the Pioneer PD-50-S CD-player is not turning on, you can try the following troubleshooting steps: 1. Check the power connection: Ensure that the power cord is securely plugged into the CD-player and the power outlet. If the power cord is connected to another component, make sure that the power to that component is turned on. 2. Verify the power source: Ensure that the power outlet is functioning properly by plugging in another device. If the outlet is not working, try plugging the CD-player into a different power outlet. 3. Check the power switch: Make sure that the power switch on the CD-player is in the "ON" position. If it is already in the "ON" position, try toggling it to the "OFF" position and then back to "ON" again. 4. Reset the CD-player: If the CD-player is unresponsive, you can try resetting it. To do this, disconnect the power cord from the power outlet, wait for a few minutes, and then reconnect the power cord. 5. Seek professional assistance: If none of the above steps resolve the issue, it is recommended to contact a Pioneer authorized service center or your dealer for further assistance and possible repair. Please note that these troubleshooting steps are based on general knowledge and may vary depending on the specific model and circumstances.

How do I switch between different modes on the Pioneer PD-50-S CD-player?

To switch between different modes on the Pioneer PD-50-S CD-player, follow these steps: 1. Locate the "FUNCTION" button on the front panel or remote control of the CD-player. 2. Press the "FUNCTION" button to cycle through the available input sources. The available modes may include DISC, iPod/USB, DIGITAL IN1, DIGITAL IN2, and Return to the beginning (Undisplayed). 3. Press the "DISC" mode to play CDs inserted into the disc tray. 4. Press the "iPod/USB" mode to play audio files from an iPod, iPhone, iPad, or USB device connected to the CD-player. 5. Press the "DIGITAL IN1" or "DIGITAL IN2" mode to use the CD-player as a digital audio converter by connecting a digital audio component to the corresponding input terminal. 6. Press the "Return to the beginning (Undisplayed)" mode to return to the initial mode or stop playback. Please note that the available modes may vary depending on the specific setup and connections of your Pioneer PD-50-S CD-player.

How do I troubleshoot audio playback issues on the Pioneer PD-50-S CD-player?

To troubleshoot audio playback issues on the Pioneer PD-50-S CD-player, you can follow these steps: 1. Check the disc: Ensure that the disc is loaded with the label side facing up and aligned properly in the disc tray guide. Make sure the disc is free from dirt, dust, and any visible damage. 2. Verify disc compatibility: Some CD-R/-RW discs recorded on a computer may not be playable. Additionally, certain file formats like WMA, MP3, and AAC may not be supported if they have DRM copy protection, are not in compliance with ISO9660 format, or have specific sampling frequency or bit rate settings. 3. Check interconnects and cables: Ensure that all interconnects between the CD-player and your amplifier or receiver are firmly inserted. Check the plugs and terminals for dirt, oxide, or damage, and clean or replace if necessary. 4. Adjust settings: Confirm that the CD-player is not set to "pause" mode by pressing the play button. Also, check the settings on your amplifier or receiver, including volume, input function, and speaker settings. 5. Consider audio format differences: Note that there may be a noticeable difference in volume between SACD and CD playback due to variations in the audio format. Additionally, audio from SACD, DSD discs, and iPod cannot be output in digital form, so use the analog audio output terminals for these media. If the issue persists after following these steps, it is recommended to contact a Pioneer authorized service center or your dealer for further assistance and possible repair.

How do I change the language settings on the Pioneer PD-50-S CD-player?

To change the language settings on the Pioneer PD-50-S CD-player, follow these steps: 1. Locate the "MENU" button on the front panel or remote control of the CD-player. 2. Press the "MENU" button to access the menu options. 3. Use the navigation buttons (such as up, down, left, right) to scroll through the menu options and select the "Language" option. 4. Press the "OK" or "Enter" button to enter the language settings menu. 5. Use the navigation buttons to select the desired language from the available options. The available languages may include English, Dutch, German, French, Spanish, Italian, and Russian. 6. Once you have selected the desired language, press the "OK" or "Enter" button to confirm the selection. 7. Exit the menu by pressing the "MENU" button again or by navigating to the "Exit" or "Close" option in the menu and pressing the "OK" or "Enter" button. Please note that the specific steps and options may vary slightly depending on the version and firmware of your Pioneer PD-50-S CD-player.

How do I connect the Pioneer PD-50-S CD player to an external amplifier?

To connect the Pioneer PD-50-S CD player to an external amplifier, follow these steps: 1. Make sure the power is switched off and disconnect the power cord from the AC outlet before making any connections. 2. Connect the analog audio output of the PD-50-S CD player to the analog audio input of the amplifier using an audio cable. The analog audio output jacks on the PD-50-S are RCA jacks, so you will need an audio cable with RCA connectors. 3. If you prefer to use the digital audio output, you can connect the digital audio output from the PD-50-S to an AV amplifier or digital recording device. The PD-50-S has both optical and coaxial digital audio output terminals. Use an optical fiber cable or a coaxial digital audio cable to make the connection. 4. If you want to use the PD-50-S as a D/A converter, you can connect the digital audio output of a digital audio component to the digital audio input of the PD-50-S. This allows you to use the PD-50-S to convert the digital audio signals to analog signals. Refer to the manual for more details on using the PD-50-S as a D/A converter. Note: The PD-50-S CD player does not output sound from SACD and DSD discs, nor from iPod/iPhone/iPad devices through the digital output terminals. Please ensure that you follow these steps carefully to properly connect the PD-50-S CD player to your external amplifier.

Why is the audio output from the Pioneer PD-50-S CD player distorted?

The audio output from the Pioneer PD-50-S CD player may be distorted due to various reasons. Here are some possible causes and troubleshooting steps: 1. Check the interconnects: Ensure that all the cables connecting the PD-50-S CD player to the amplifier are firmly inserted. Check for any dirt, oxide, or damage on the plugs and terminals. Clean them if necessary. 2. Verify the disc condition: Make sure the CD being played is not damaged and free from dust and dirt. Clean the disc if needed. 3. Adjust amplifier settings: Check the volume, input function, and speaker settings on your amplifier/receiver. Ensure that the settings are appropriate for the desired audio output. 4. Avoid phono inputs: Ensure that the PD-50-S CD player's output is not connected to the phono inputs of the amplifier, as these inputs are specifically designed for turntables and may cause distortion when used with other audio sources. 5. Disable Pure Audio feature: If the audio output is not coming through the digital output, make sure that the Pure Audio feature is switched off. Refer to the manual for instructions on how to disable this feature. By following these troubleshooting steps, you can address the issue of distorted audio output from the Pioneer PD-50-S CD player.

How do I change the playback mode on the Pioneer PD-50-S CD player?

To change the playback mode on the Pioneer PD-50-S CD player, follow these steps: 1. Press the front panel's power button (\uf075/I STANDBY/ON) to turn on the unit. Make sure the power is on before proceeding. 2. Press the open/close button (\uf068) to open the disc tray. Place the CD on the tray with the imprinted side facing up. 3. Press the play button (\uf066) to start playback. To pause playback, press the pause button (\uf066) again. To stop playback, press the stop button (\uf067). 4. To change the playback mode, use the corresponding buttons on the front panel or the remote control. The available playback modes may include repeat playback, random playback, and programmed playback. 5. To enable repeat playback, press the repeat button. The repeat indicator will light up on the front panel display. Press the button again to alternate between single-track repeat and disc (all-track) repeat. 6. For random playback, press the random button. The random indicator will light up on the front panel display. Press the button again to stop random playback. 7. To program tracks for playback in a specific order, press the program button. The program indicator will light up on the front panel display. Use the number buttons to select the desired track numbers, followed by the enter button to confirm the selection. By following these steps, you can easily change the playback mode on the Pioneer PD-50-S CD player and enjoy your music in different ways.

How do I set the clock on the Pioneer PD-50-S CD player?

To set the clock on the Pioneer PD-50-S CD player, follow these steps: 1. Turn on the CD player by pressing the power button (\uf075/I STANDBY/ON) located on the front panel. 2. Press the function button (\uf06e) on the front panel or the remote control repeatedly until the clock display appears on the front panel. 3. Use the arrow buttons (\uf053/\uf054) on the front panel or the remote control to select the hour and minute digits of the clock. 4. Press the enter button (\uf04b) on the front panel or the remote control to confirm the selected hour and minute. 5. Use the arrow buttons (\uf053/\uf054) to adjust the clock to the correct time. 6. Press the enter button to save the set time and exit the clock setting mode. Note: The clock on the PD-50-S CD player can be set in either 12-hour or 24-hour format. Refer to the manual for instructions on how to switch between the two formats. By following these steps, you can easily set the clock on the Pioneer PD-50-S CD player and ensure accurate time display.

Why is the Pioneer PD-50-S CD player not reading the CD?

There could be several reasons why the Pioneer PD-50-S CD player is not reading the CD. Here are some possible causes and troubleshooting steps: 1. Check the disc: Ensure that the CD is inserted with the label side facing up and properly aligned in the disc tray guide. Make sure the disc is free from dirt, dust, and scratches. Clean the disc if necessary. 2. Condensation: If condensation has formed inside the player, it may affect the CD reading. Allow time for the condensation to evaporate by leaving the player in a dry environment. Avoid using the player near an air-conditioning unit. 3. Unsupported disc type: If the CD player does not support the type of disc being used, it may not be able to read it. Ensure that you are using a standard audio CD and not a different format like SACD or MP3 CD. 4. CD-R/-RW compatibility: Some CD-R/-RW discs recorded on a computer may not be compatible with the PD-50-S CD player. Ensure that the CD-R/-RW discs are recorded in a compatible format (ISO9660 level 1 or 2) and with a sampling frequency of 44.1 kHz. 5. Dirty lens: If the lens of the CD player is dirty, it may have difficulty reading the CD. Use a CD lens cleaning kit to clean the lens following the instructions provided. By following these troubleshooting steps, you can address the issue of the Pioneer PD-50-S CD player not reading the CD and potentially resolve the problem.

Is the manual of the Pioneer PD-50-S available in English?

Yes, the manual of the Pioneer PD-50-S is available in English .

Is your question not listed? Ask your question here

No results