View the manual for the Pioneer ND-PS1 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Pioneer ND-PS1 or do you need help? Ask your question here

| Brand | Pioneer |
| Model | ND-PS1 | ND-PS1 |
| Product | not categorized |
| EAN | 0884938404594, 8849384045946 |
| Language | English |
| Filetype | User manual (PDF) |
| Number of sensors | 4 |
| Connectivity technology | Wired |
| Product color | Black |
| International Protection (IP) code | IP67 |
| Product color | Black |
| International Protection (IP) code | IP67 |
| Product type | Parking sensor |
| Number of sensors | 4 |
| Voltage | 10.8 - 15.1 V |
| Operating voltage (max) | 15.1 V |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer ND-PS1 below.
Yes, the Pioneer ND-PS1 is a parking sensor, which means it is designed to assist drivers in parking maneuvers.
The Pioneer ND-PS1 has 4 sensors, providing comprehensive coverage for detecting obstacles while parking.
The maximum operating voltage of the Pioneer ND-PS1 is 15.1 V, which ensures stable performance during operation.
The Pioneer ND-PS1 uses wired connectivity technology, offering a reliable connection for accurate parking assistance.
The International Protection (IP) code of the Pioneer ND-PS1 is IP67, indicating that it is dust-tight and can withstand immersion in up to 1 meter of water for 30 minutes. This means it is highly durable and suitable for different weather conditions.
To ensure the vehicle is powered off during the installation of the Pioneer ND-PS1, follow these steps: 1. Turn off the vehicle completely before starting the installation process. 2. Verify that the engine is not running and all electrical systems are switched off. 3. Ensure that the ignition key is in the off position to prevent any power supply to the vehicle. 4. Double-check that no lights or accessories are active to guarantee the vehicle is completely powered down. 5. Prioritize safety by disconnecting the battery to eliminate any risk of electrical shock during the installation. 6. Proceed with the installation only when you are certain that the vehicle is entirely deactivated to avoid any potential hazards.
To prevent damage to the sensors of the Pioneer ND-PS1 during installation, follow these precautions: - Drill holes into a non-metal vehicle bumper for installation. - Ensure the vehicle is powered off during the installation process. - Check that engine parts like the exhaust pipe are not hot before proceeding with installation. - Position the sensors correctly for proper functionality. - Avoid installing the control box near vent pipes or wiring. - Route wires away from high-temperature areas to prevent insulation damage. - Securely anchor the control box in the passenger compartment to prevent accidents. - Use cable clamps or electrical tape to secure all wiring and avoid exposed bare wires. - Ensure cables and wires do not interfere with any moving parts of the vehicle. - If wiring is under the front seat, route it carefully to avoid obstruction of seat movement. - Mount the product ensuring no leads are trapped between the unit and surrounding metalwork.
Yes, the manual of the Pioneer ND-PS1 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Pioneer and is the answer not in the manual?
Question and answer
Number of questions: 1Szeretném kérdezni hogy, a vonóhorog zavarja e a tolató radar jelét?