Pioneer MVH-8200 manual

Pioneer MVH-8200
8.1 · 3
PDF manual
 · 184 pages
English
manualPioneer MVH-8200

Operation Manual

Mode d’emploi

Manual de instrucciones

MEDIA CENTER RECEIVER
AUTORADIO MULTIMEDIA
RECEPTOR Y CENTRO DE COMUNICACIONES

MVH-P8200BT

MVH-P8200

English Français Español

View the manual for the Pioneer MVH-8200 here, for free. This manual comes under the category car radios and has been rated by 3 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Pioneer MVH-8200 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandPioneer
ModelMVH-8200 | MVH-8200
Productcar radio
EAN4977729976083
LanguageEnglish
FiletypeUser manual (PDF)
Technical details
EqualizerYes
Product colorBlack
Audio
Audio D/A Converter (DAC)24-bit/192kHz
Audio output channels3.1 channels
Other features
Output power description50W x 4
Radio
Radio Data System (RDS)Yes
AM band range522 - 1611 kHz
FM band range87.5 - 108 MHz
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer MVH-8200 below.

What is the difference between FM and AM?

FM stands for Frequency Modulation and AM stands for Amplitude Modulation. The biggest difference between FM radio stations compared to AM radio stations is the sound quality.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

My car radio does not turn on, now what?

If your car radio does not turn on, it will not receive any power. Check that the red wire is connected to the contact power supply and the yellow wire to the constant power supply.

How can I best clean my car radio?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Does the Pioneer MVH-8200 have an equalizer?

Yes, the Pioneer MVH-8200 comes with an equalizer, allowing users to customize and fine-tune the audio output to their preferences.

What is the output power of the Pioneer MVH-8200?

The Pioneer MVH-8200 has an output power of 50W x 4, providing users with a powerful and clear audio experience.

How many audio output channels does the Pioneer MVH-8200 have?

The Pioneer MVH-8200 has 3.1 audio output channels, which offers users a surround sound-like experience and better audio quality compared to standard stereo systems.

Does the Pioneer MVH-8200 come with Radio Data System (RDS)?

Yes, the Pioneer MVH-8200 features Radio Data System (RDS), allowing users to see information such as artist name, song title, and traffic updates on the radio display, enhancing the overall user experience.

How do I troubleshoot if the head unit of the Pioneer MVH-8200 car radio is not turning on?

To troubleshoot if the head unit of the Pioneer MVH-8200 car radio is not turning on, you can follow these steps: 1. Check the connections: Confirm that all the leads and connectors are correctly connected. Make sure there are no loose or disconnected cables. 2. Check the fuse: If the unit is not turning on, there might be a blown fuse. Rectify the cause of the blown fuse and replace it with a fuse of the same rating. 3. Reset the unit: Press the RESET button on the car radio. This can help if noise or other factors are causing the built-in microprocessor to operate incorrectly. 4. Check the power source: Ensure that the car radio is receiving power from the vehicle's battery. Check the battery connections and make sure they are secure. 5. Seek professional assistance: If the above steps do not resolve the issue, it is recommended to seek assistance from a qualified technician or contact Pioneer customer support for further troubleshooting and assistance. Remember to always follow safety precautions and consult the manual for specific instructions related to your car radio model.

How do I troubleshoot if there is no sound coming from the car radio?

To troubleshoot if there is no sound coming from the Pioneer MVH-8200 car radio, you can follow these steps: 1. Check the volume level: Ensure that the volume is not set to the minimum or muted. Adjust the volume level using the volume control knob or buttons. 2. Check the audio source: Make sure that the correct audio source is selected. Switch between different sources (e.g., radio, CD, USB) to see if the issue persists. 3. Check the speaker connections: Verify that the speaker wires are properly connected to the car radio. Ensure that there are no loose or disconnected wires. 4. Check the audio settings: Access the audio menu settings on the car radio and check if any audio settings, such as fader/balance or equalizer, are affecting the sound output. Adjust these settings as needed. 5. Check the external amplifier (if applicable): If you have an external amplifier connected to the car radio, ensure that it is powered on and properly connected. Check the amplifier settings and connections. If the issue persists after following these steps, it is recommended to consult a professional technician or contact Pioneer customer support for further assistance.

How do I troubleshoot if the car radio is not able to find any radio stations?

To troubleshoot if the car radio is not able to find any radio stations on the Pioneer MVH-8200, you can follow these steps: 1. Check the antenna connection: Ensure that the car radio's antenna is properly connected. Make sure there are no loose or damaged antenna cables. 2. Check the antenna signal: Verify that the antenna is receiving a strong signal. Check the antenna position and adjust it if necessary. Consider using an external antenna for better reception. 3. Scan for radio stations: Access the radio menu settings on the car radio and perform an automatic or manual scan for radio stations. Make sure the scan mode is set correctly (e.g., FM, AM) and adjust the scan settings as needed. 4. Check the radio frequency range: Confirm that the car radio is set to the correct frequency range (e.g., FM 87.5-108 MHz). Adjust the frequency range settings if necessary. 5. Seek professional assistance: If the above steps do not resolve the issue, it is recommended to seek assistance from a qualified technician or contact Pioneer customer support for further troubleshooting and assistance. Remember to consult the manual for specific instructions related to your car radio model and follow any additional troubleshooting steps provided.

How do I troubleshoot if the Bluetooth telephone function of the car radio is not connecting to my phone?

To troubleshoot if the Bluetooth telephone function of the Pioneer MVH-8200 car radio is not connecting to your phone, you can follow these steps: 1. Check the Bluetooth settings: Ensure that the Bluetooth function is enabled on both the car radio and your phone. Make sure that the car radio is set to discoverable mode. 2. Pairing process: Delete any existing Bluetooth pairings on both the car radio and your phone. Then, initiate the pairing process by searching for available devices on your phone and selecting the Pioneer MVH-8200 from the list. Follow the on-screen prompts to complete the pairing process. 3. Check the phone compatibility: Verify that your phone is compatible with the car radio's Bluetooth system. Check the car radio's manual or Pioneer's website for a list of compatible devices. 4. Reset the car radio: If the pairing process is unsuccessful, try resetting the car radio to its factory settings. Refer to the car radio's manual for instructions on how to perform a factory reset. 5. Seek professional assistance: If the issue persists after following these steps, it is recommended to seek assistance from a qualified technician or contact Pioneer customer support for further troubleshooting and assistance. Remember to consult the manual for specific instructions related to your car radio model and follow any additional troubleshooting steps provided.

How do I troubleshoot if the car radio is not recognizing the USB or SD memory card?

To troubleshoot if the Pioneer MVH-8200 car radio is not recognizing the USB or SD memory card, you can follow these steps: 1. Check the connection: Ensure that the USB or SD memory card is properly connected to the car radio. Make sure there are no loose or damaged connections. 2. Check the compatibility: Verify that the USB or SD memory card is compatible with the car radio. Check the car radio's manual or Pioneer's website for a list of compatible devices and supported file formats. 3. Format the USB or SD memory card: If the USB or SD memory card is not recognized, try formatting it using a computer. Make sure to select the appropriate file system format (e.g., FAT32) compatible with the car radio. 4. Check the file structure: Ensure that the files on the USB or SD memory card are organized in a supported file structure. Avoid using nested folders or excessive subfolders. 5. Seek professional assistance: If the issue persists after following these steps, it is recommended to seek assistance from a qualified technician or contact Pioneer customer support for further troubleshooting and assistance. Remember to consult the manual for specific instructions related to your car radio model and follow any additional troubleshooting steps provided.

How do I adjust the volume on the Pioneer MVH-8200 car radio?

To adjust the volume on the Pioneer MVH-8200 car radio, follow these steps: 1. Display the audio menu by referring to the "Basic menu operations" section in the manual. 2. Turn the Multi-Control (M.C.) knob to select the audio function. 3. To adjust the volume, turn the M.C. knob clockwise to increase the volume or counterclockwise to decrease the volume. Note: The volume adjustment is a basic operation and can be performed at any time while using the car radio. Please keep in mind that the steps provided are based on the information available in the manual for the Pioneer MVH-8200 car radio.

Why is the car radio not responding when I press the buttons on the head unit?

If the car radio is not responding when you press the buttons on the head unit of the Pioneer MVH-8200, you can try the following steps to troubleshoot the issue: 1. Check if the front panel is securely attached to the head unit. If it is not properly connected, remove the front panel and reattach it until it clicks into place. 2. Ensure that the car radio is turned on. Press the SRC/OFF button to turn on the unit. 3. Verify that the volume is not muted. Press the MUTE button to unmute the audio. 4. Check the battery of the remote control if you are using it. Replace the battery if necessary and make sure it is inserted correctly. 5. If none of the above steps resolve the issue, it is recommended to consult the manual for further troubleshooting or contact Pioneer customer support for assistance. Please note that these steps are based on the information available for the Pioneer MVH-8200 car radio and are intended to provide general guidance for troubleshooting the unresponsiveness of the head unit buttons.

How do I store my favorite radio stations on the Pioneer MVH-8200 car radio?

To store your favorite radio stations on the Pioneer MVH-8200 car radio, follow these steps: 1. Push the Multi-Control (M.C.) knob up or down to display the preset screen. 2. Use the M.C. knob to select the desired band (FM1, FM2, FM3 for FM or AM). 3. Turn the M.C. knob to change the preset number and press and hold it to store. 4. Use the M.C. knob to select the desired station and turn it to change the station. Press the knob to select. Note: You can also display the preset screen by pressing the HOME button. Refer to the "Basic menu operations" section in the manual for more information. By following these steps, you can easily store your favorite radio stations on the Pioneer MVH-8200 car radio for quick access and convenience.

Why is the Bluetooth connection not working for hands-free phoning?

There could be several reasons why the Bluetooth connection is not working for hands-free phoning on the Pioneer MVH-8200 car radio. Here are some troubleshooting steps you can try: 1. Check if the Bluetooth function is enabled on both the car radio and your phone. Ensure that Bluetooth is turned on and visible on both devices. 2. Verify that your phone is within the Bluetooth range of the car radio. Make sure you are within the recommended distance for a stable connection. 3. Check if the car radio is already paired with your phone. If not, follow the instructions in the manual to pair your phone with the car radio. 4. Ensure that the Bluetooth profiles supported by your phone are compatible with the car radio. Some older phones may not support all Bluetooth profiles required for hands-free phoning. 5. If the Bluetooth connection still does not work, try resetting the car radio and your phone. Turn off both devices, wait for a few seconds, and then turn them back on. If these steps do not resolve the issue, it is recommended to consult the manual for further troubleshooting or contact Pioneer customer support for assistance.

How do I connect my phone to the car radio via Bluetooth for hands-free phoning?

To connect your phone to the Pioneer MVH-8200 car radio via Bluetooth for hands-free phoning, follow these steps: 1. Press the M.C. (Multi-Control) knob to display the setting mode. 2. Turn the M.C. knob to select "Add Device" and press the knob to start searching for devices. 3. Turn the M.C. knob to select your phone from the device list. If your phone is not displayed, select "Search Again". 4. Press and hold the M.C. knob to switch the BD address and device name. 5. Press the M.C. knob to connect the selected cellular phone. 6. While connecting, the circular indicator will flash. To complete the connection, check the device name (MVH-P8200BT) and enter the link code on your phone. 7. If the connection is established, a circular indicator will appear next to the device name. Note: If you have already paired five devices, "Memory Full" will be displayed, and you will need to delete a paired device before connecting a new one. By following these steps, you can successfully connect your phone to the Pioneer MVH-8200 car radio via Bluetooth for hands-free phoning.

Is the manual of the Pioneer MVH-8200 available in English?

Yes, the manual of the Pioneer MVH-8200 is available in English .

Is your question not listed? Ask your question here

No results