Pioneer MCS-434 manual

Pioneer MCS-434
6.7 · 2
PDF manual
 · 576 pages
English
manualPioneer MCS-434

Blu-ray Disc Surround System

Système Home-Cinéma Blu-ray Disc

Blu-ray Disc Mehrkanal-System

Sistema Surround con Lettore Blu-ray Disc

Blu-ray Disc Multikanaals Systeem

Sistema Surround de Blu-ray Disc

MCS-838

MCS-434

MCS-737

MCS-333

MCS-FS232

MCS-FS131

ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
NEDERLANDS
ESPAÑOL

Operating Instructions / Mode d’emploi / Bedienungsanleitung /

Istruzioni per l’uso / Handleiding / Manual de instrucciones

View the manual for the Pioneer MCS-434 here, for free. This manual comes under the category home cinema sets and has been rated by 2 people with an average of a 6.7. This manual is available in the following languages: English. Do you have a question about the Pioneer MCS-434 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 4
S
Sophia ChangDecember 17, 2015

Hello Team Good day to you. May I know how to listen only music without singer voice. Thanks and regards. From: Sophia Chang

S
Sophia ChangDecember 18, 2015

Hello Team, Good afternoon to you. Please guide me on MCS-434 Karaoke setting. .Appreciate you could tell me how to cancel off singer voice while remain music on for karaoke singing. Thanks and regards. From: Sophia Chang

S
SatoshiJuly 29, 2019

I bought this Pioneer Theater MCS-434 in JAPAN and brought it back to the US. In the US, I bought a TV Sharp LC-42LB150U, and connected it to the Pioneer Theater. My question is, what is the CODE for the US Sharp TV to use for Pioneer Theater REMOTE CONTROL for the Sharp TV, for using the control buttons located on the remote bottom? (I tried all the codes listed in the Pioneer manual, to no veil.)

S
SubarajanAugust 18, 2020

How to connect usb in pioneer MCS-434

The Pioneer MCS-434 home cinema set is a versatile audio system that offers an immersive entertainment experience. With its ability to play SACD discs, users can enjoy high-quality audio playback with enhanced depth and clarity. The system does not include a built-in HDD for storage, but it supports various video formats such as AVCHD, DIVX, DIVX HD, MKV, and WMV, allowing users to enjoy their favorite movies and videos. With a RMS rated power of 1000W and 5.1 audio output channels, the Pioneer MCS-434 delivers powerful and surround sound to elevate the home theater experience. It also supports a range of audio formats, including FLAC, LPCM, WAV, and WMA, ensuring compatibility with various music files. Additionally, this home cinema set features an FM radio function, allowing users to listen to their favorite radio stations and stay updated with the latest news and music. The inclusion of a karaoke feature adds a fun element to gatherings or parties, providing users with the ability to sing along to their favorite songs. Despite not being able to store content internally, this home cinema set offers a range of connectivity options, including HDMI ports and USB inputs. This allows users to connect external devices such as gaming consoles, Blu-ray players, or USB drives to enjoy an even wider range of media. The Pioneer MCS-434 home cinema set is designed with a sleek and modern aesthetic, making it an attractive addition to any living space. With its comprehensive range of features and high-quality audio performance, this home cinema set provides a satisfying entertainment solution for music, movies, and more.

General
BrandPioneer
ModelMCS-434 | MCS-434
Producthome cinema set
EAN4988028212765
LanguageEnglish
FiletypeUser manual (PDF)
Optical drive
Optical disc player typeBlu-Ray player
Disc types supportedBD-R, BD-RE, CD, CD-R, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW
Playback disc formatsSACD
Other features
Built-in HDDNo
Apple docking compatibilityiPad, iPad 2, iPad mini, iPhone 3G, iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5, iPod Nano 2, iPod Nano 3, iPod Nano 4, iPod Nano 5, iPod Nano 6, iPod Nano 7, iPod Touch 1, iPod Touch 2, iPod Touch 3, iPod Touch 4, iPod Touch 5
Image formats supportedGIF, JPG, PNG
MP3 playbackYes
Internet radioYes
TV tuner integrated-
Video
3D-
Video formats supportedAVCHD, DIVX, DIVX HD, MKV, WMV
Audio
RMS rated power1000 W
Audio output channels5.1 channels
Audio decodersDolby Digital, Dolby Digital Plus, Dolby Pro Logic II, DTS-HD Master Audio
Audio formats supportedFLAC, LPCM, WAV, WMA
Radio
FM radioYes
Satellite speakers
Wireless satellite speakers-
Subwoofer
Wireless subwoofer-
Technical details
Product colorBlack
KaraokeYes
Yes
Network
Wi-FiYes
Ethernet LANYes
Packaging content
Handheld remote controlYes
Ports & interfaces
HDMI in4
Number of HDMI outputs1
SCART ports quantity0
USB ports quantity2
Component video (YPbPr/YCbCr) out0
S-Video outputs quantity0
FM antennaYes
Digital audio coaxial in0
Digital audio optical in1
AUX inYes
Digital audio optical out0
Ethernet LAN (RJ-45) ports1
Digital audio coaxial out0
USB version2.0
Weight & dimensions
Front speaker dimensions (WxDxH)95 x 90 x 80 mm
Front speaker weight400 g
Center speaker dimensions (WxDxH)230 x 90 x 80 mm
Center speaker weight700 g
Satellite speaker dimensions (WxDxH)95 x 90 x 80 mm
Satellite speaker weight400 g
Subwoofer dimensions (WxDxH)130.5 x 375 x 420 mm
Subwoofer weight4400 g
Main unit dimensions (WxDxH)430 x 349 x 63 mm
Main unit weight3100 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer MCS-434 below.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my home cinema set?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Does the Pioneer MCS-434 support SACD playback?

Yes, the Pioneer MCS-434 supports SACD playback. This means that users can enjoy high-quality audio from SACD discs, providing a superior listening experience compared to standard CDs.

Does the Pioneer MCS-434 have a built-in HDD?

No, the Pioneer MCS-434 does not have a built-in HDD. This means that users will need to use external storage devices or streaming services to access their media files.

Which video formats are supported by the Pioneer MCS-434?

The Pioneer MCS-434 supports AVCHD, DIVX, DIVX HD, MKV, and WMV video formats. Users can enjoy a wide range of video content without the need for additional conversions or codecs.

What is the RMS rated power of the Pioneer MCS-434?

The Pioneer MCS-434 has an RMS rated power of 1000 W. This high power output ensures immersive and powerful audio playback, delivering a cinematic experience in the comfort of your home.

How many audio output channels does the Pioneer MCS-434 have?

The Pioneer MCS-434 has 5.1 audio output channels. This means that users can enjoy surround sound, with separate channels for front, center, rear, and subwoofer speakers, creating a realistic audio environment when watching movies or listening to music.

How do I properly position the speakers for optimal sound quality?

To properly position the speakers of the Pioneer MCS-434 home cinema set for optimal sound quality, follow these steps: 1. Front left and right speakers: Place the front speakers to the sides of the TV or screen, as flush with the screen surface as possible. 2. Center speaker: Position the center speaker below or in front of the TV or screen. 3. Surround left and right speakers: Place these speakers behind your listening position, facing slightly inwards. 4. Subwoofer: The position of the subwoofer is not critical as low bass sounds are not highly directional. However, it is recommended to place the subwoofer near the front speakers and turn it slightly toward the center of the room to reduce wall reflections. 5. Ensure safety precautions: Make sure children do not put their hands or any objects into the subwoofer duct. Also, place the front speakers and center speaker at a safe distance from the reach of children to prevent accidents. Remember to keep the speakers away from magnetic storage media and avoid placing them near a TV or monitor to prevent interference. By following these positioning guidelines, you can achieve optimal sound quality from your Pioneer MCS-434 home cinema set.

What should I do if the sound from the speakers is distorted or unclear?

If the sound from the speakers of your Pioneer MCS-434 home cinema set is distorted or unclear, you can follow these troubleshooting steps: 1. Check the cables: Ensure that all the cables connecting the speakers to the home cinema set are properly connected. Make sure they are inserted firmly and securely. 2. Verify the audio settings: Check the audio output settings on the home cinema set. Ensure that the correct audio output mode is selected and that the settings are appropriate for your setup. 3. Adjust the speaker levels: Use the speaker setup menu on the home cinema set to adjust the individual speaker levels. Increase or decrease the volume levels of the affected speakers to achieve a balanced sound. 4. Check the source material: If the distortion or unclear sound is specific to certain audio or video content, try playing different sources to determine if the issue persists across all media. 5. Reset the system: If the above steps do not resolve the issue, you can try resetting the home cinema set to its factory default settings. Refer to the manual for instructions on how to perform a system reset. By following these troubleshooting steps, you can address sound distortion or unclear audio issues with your Pioneer MCS-434 home cinema set.

How do I connect the home cinema set to my TV?

To connect the Pioneer MCS-434 home cinema set to your TV, follow these steps: 1. Determine the type of connection: Check the available ports on both the home cinema set and your TV. The most common connection options are HDMI, optical, and analog audio. 2. HDMI connection: If your TV and home cinema set have HDMI ports, use an HDMI cable to connect the HDMI OUT port on the home cinema set to an HDMI IN port on your TV. Make sure to select the corresponding HDMI input on your TV. 3. Optical connection: If your TV has an optical audio output and the home cinema set has an optical input, use an optical cable to connect the two. Insert one end of the cable into the optical audio output on your TV and the other end into the optical input on the home cinema set. 4. Analog audio connection: If your TV and home cinema set have analog audio ports, use RCA cables to connect the audio output on your TV to the audio input on the home cinema set. Match the colors of the cables to the corresponding ports (red to red, white to white). 5. Power on and test: Once the connections are made, power on both the TV and the home cinema set. Select the appropriate input source on the home cinema set and adjust the volume as needed. Test the audio by playing a movie or music to ensure the sound is coming from the speakers. By following these steps, you can successfully connect the Pioneer MCS-434 home cinema set to your TV and enjoy immersive audio.

What should I do if the remote control is not working?

If the remote control for your Pioneer MCS-434 home cinema set is not working, you can try the following troubleshooting steps: 1. Check the batteries: Ensure that the batteries in the remote control are inserted correctly and have enough power. Replace the batteries if necessary. 2. Remove any obstacles: Make sure there are no objects blocking the line of sight between the remote control and the home cinema set. Remove any obstructions that may interfere with the signal. 3. Clean the remote control: Check if the remote control buttons are dirty or sticky. Clean the surface of the remote control using a soft, lint-free cloth dampened with a mild cleaning solution. Avoid using harsh chemicals or abrasive materials. 4. Reset the remote control: If the previous steps did not resolve the issue, try resetting the remote control. Remove the batteries from the remote control and press each button a few times to discharge any residual power. Then, reinsert the batteries and test the remote control again. 5. Contact customer support: If the remote control still does not work, it may require further assistance. Contact Pioneer customer support for additional troubleshooting or to inquire about a replacement remote control. By following these steps, you can troubleshoot and resolve issues with a non-working remote control for your Pioneer MCS-434 home cinema set.

How do I troubleshoot audio synchronization issues between the home cinema set and my TV?

To troubleshoot audio synchronization issues between your Pioneer MCS-434 home cinema set and your TV, you can follow these steps: 1. Check the audio delay settings: Access the audio settings menu on your home cinema set and look for options related to audio delay or synchronization. Adjust the settings to synchronize the audio with the video playback on your TV. 2. Adjust the TV settings: Some TVs have built-in audio delay settings. Check your TV's audio settings menu and look for options to adjust the audio delay. Experiment with different settings to find the optimal synchronization between the TV and the home cinema set. 3. Use HDMI-CEC feature: If your TV and home cinema set support HDMI-CEC (Consumer Electronics Control), enable this feature. HDMI-CEC allows devices to communicate and synchronize their operations, including audio and video playback. 4. Update firmware: Check if there are any firmware updates available for your home cinema set. Visit the manufacturer's website and follow the instructions to update the firmware. Firmware updates can sometimes resolve audio synchronization issues. 5. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact Pioneer customer support for further assistance. They can provide specific troubleshooting steps or arrange for a repair if necessary. By following these steps, you can troubleshoot and resolve audio synchronization issues between your Pioneer MCS-434 home cinema set and your TV.

Is the manual of the Pioneer MCS-434 available in English?

Yes, the manual of the Pioneer MCS-434 is available in English .

Is your question not listed? Ask your question here

No results