View the manual for the Pioneer HTP-200 here, for free. This manual comes under the category speakers and has been rated by 6 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Pioneer HTP-200 or do you need help? Ask your question here




The Pioneer HTP-200 speaker is a 5.1 channel audio system that offers a total RMS rated power of 600 W. The center speaker, satellite speakers, and subwoofer all have an impedance of 6 Ω. The subwoofer specifically has a subwoofer RMS power of 130 W, while the center speaker and satellite speakers also boast a RMS power of 130 W each. However, this speaker is not remotely operated. Additionally, the weight of the subwoofer is 230 g. Overall, the Pioneer HTP-200 speaker system provides a 5.1 audio experience with a total power output of 600 W. The individual components, including the center speaker, satellite speakers, and subwoofer, all have a similar impedance of 6 Ω. The center speaker, satellite speakers, and subwoofer each offer a RMS power of 130 W, ensuring adequate audio performance. Nonetheless, it is worth noting that this speaker system does not come with remote control functionality. The subwoofer weighs 230 g, which adds to its convenience and portability. Altogether, the Pioneer HTP-200 speaker system is a reliable audio solution, capable of delivering a immersive listening experience.
| Brand | Pioneer |
| Model | HTP-200 | HTP-200 |
| Product | speaker |
| EAN | 4988028001031 |
| Language | English |
| Filetype | User manual (PDF) |
| Audio output channels | 5.1 channels |
| RMS rated power | 600 W |
| Remotely operated | No |
| Product color | Black |
| Center speaker impedance | 6 Ω |
| Center speaker RMS power | 130 W |
| Center speaker impedance | 6 Ω |
| Center speaker RMS power | 130 W |
| Satellite speaker impedance | 6 Ω |
| Satellite speakers RMS power | 130 W |
| Satellite speaker impedance | 6 Ω |
| Satellite speakers RMS power | 130 W |
| Subwoofer impedance | 6 Ω |
| Subwoofer RMS power | 130 W |
| Subwoofer weight | 230 g |
| Subwoofer impedance | 6 Ω |
| Subwoofer RMS power | 130 W |
| Audio output channels | 5.1 channels |
| RMS rated power | 600 W |
| Product color | Black |
| Subwoofer weight | 230 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer HTP-200 below.
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.
Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
First, ensure that all the speaker wires are correctly connected to the corresponding terminals on the receiver and speakers. Then, make sure the receiver is properly connected to your audio source, such as a TV or audio player, using the appropriate cables. Finally, follow the on-screen instructions or menu options of your audio source to select and configure the Pioneer HTP-200 as your audio output.
To adjust the volume levels of the speakers individually, access the speaker setup menu on the receiver. Look for an option called "Speaker Configuration" or "Audio Settings" and navigate to the "Channel Level" or "Speaker Level" section. From there, you can increase or decrease the volume levels of each speaker to achieve the desired balance.
The Pioneer HTP-200 offers various surround sound modes, such as Dolby Digital, DTS, and stereo. To select the desired surround sound mode, press the "Listening Mode" or "Surround Mode" button on the receiver or remote control. Cycle through the available options until you find the mode that suits your audio content and preferences.
The Pioneer HTP-200 is equipped with an automatic speaker calibration feature. Locate the calibration microphone included in the package and connect it to the receiver. Place the microphone at your listening position, then access the system setup menu on the receiver. Look for an option like "Auto Calibration" or "Speaker Setup" and follow the on-screen instructions to initiate the calibration process. This will optimize the speaker settings based on your room's acoustics.
Absolutely! The Pioneer HTP-200 provides multiple input options to connect external devices. Look for HDMI, optical, coaxial, or analog audio input ports on the back of the receiver. Depending on your device's output, use the appropriate cables to connect it to the corresponding input on the receiver.
The Pioneer HTP-200 has 5.1 audio output channels.
The Pioneer HTP-200 has a RMS rated power of 600 W.
The impedance of the center speaker of the Pioneer HTP-200 is 6 Ω.
No, the Pioneer HTP-200 does not have a remotely operated feature.
The subwoofer of the Pioneer HTP-200 has a RMS power of 130 W. This is a powerful subwoofer that can provide deep and immersive bass audio.
Yes, the manual of the Pioneer HTP-200 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Pioneer and is the answer not in the manual?
Question and answer
Number of questions: 0