Pioneer GM-A5602 manual

Pioneer GM-A5602
9.3 · 5
PDF manual
 · 92 pages
English
manualPioneer GM-A5602

Owners Manual

Mode demploi

BRIDGEABLE TWO-CHANNEL POWER AMPLIFIER
AMPLIFICATEUR DE PUISSANCE PONTABLE À
DEUX CANAUX
AMPLIFICATORE DI POTENZA A DUE CANALI
COLLEGABILE A PONTE
AMPLIFICADOR DE POTENCIA DE DOS CANALES
PUENTEABLE
BRÜCKBARER ZWEI-KANAL-LEISTUNGSVER-
STÄRKER
SCHAKELBARE 2-KANAALSVERSTERKER
ДВУХКАНАЛЬНЫЙ УСИЛИТЕЛЬ МОЩНОСТИ С
ВОЗМОЖНОСТЬЮ МОСТОВОГО ВКЛЮЧЕНИЯ

GM-A5602

GM-A3602

English NederlandsDeutschEspañolItalianoFrançais Русский

View the manual for the Pioneer GM-A5602 here, for free. This manual comes under the category receivers and has been rated by 5 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Pioneer GM-A5602 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
T
TobyJune 7, 2024

Why does the power light blink and not work?

The Pioneer GM-A5602 is a two-channel receiver that delivers powerful audio performance. With a maximum power output of 900W per channel at 2 Ohms and 600W per channel at 4 Ohms, this receiver is capable of producing high-quality sound with plenty of volume. The bridged output power also reaches a maximum of 900W, ensuring that the receiver can drive any connected speakers with ease. Featuring a signal-to-noise ratio of 96dB, the GM-A5602 delivers clear and distortion-free audio playback. This receiver is designed to provide a clean and accurate sound reproduction, allowing listeners to enjoy their favorite music with precision and clarity. Measuring at 348mm in width, 215mm in depth, and 60mm in height, the Pioneer GM-A5602 is compact and easy to install. Weighing at 2300g, it is lightweight and convenient for transportation. The GM-A5602 is built with high-quality components, ensuring reliability and durability over time. With a current rating of 36A, this receiver is capable of handling demanding audio setups without any performance issues. In summary, the Pioneer GM-A5602 is a two-channel receiver that offers powerful audio performance with a maximum power output of 900W. With its high signal-to-noise ratio and premium construction, this receiver delivers clear and accurate sound reproduction. Compact and lightweight, the GM-A5602 is easy to install and built to last.

General
BrandPioneer
ModelGM-A5602 | GM-A5602
Productreceiver
EAN4988028219733
LanguageEnglish
FiletypeUser manual (PDF)
Performance
Number of amplifier channels2 channels
RMS power output per channel (2 Ohm)450 W
RMS power output per channel (4 Ohm)300 W
Maximum power output per channel (2 Ohm)900 W
Maximum power output per channel (4 Ohm)600 W
Bridged output power (max)900 W
Bass boost0 - 12 dB
Signal-to-Noise Ratio (SNR)96 dB
Current36 A
Features
Product colorBlack, Red
Weight & dimensions
Width348 mm
Depth215 mm
Height60 mm
Weight2300 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer GM-A5602 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Pioneer GM-A5602?

The Pioneer GM-A5602 has a weight of 2300 g.

What is the height of the Pioneer GM-A5602?

The Pioneer GM-A5602 has a height of 60 mm.

What is the width of the Pioneer GM-A5602?

The Pioneer GM-A5602 has a width of 348 mm.

What is the depth of the Pioneer GM-A5602?

The Pioneer GM-A5602 has a depth of 215 mm.

What is the maximum power output per channel at 2 Ohm for Pioneer GM-A5602?

The maximum power output per channel at 2 Ohm for Pioneer GM-A5602 is 900 Watts. This is considered high and means that the receiver is capable of delivering a powerful and loud audio experience to the user.

How many amplifier channels does Pioneer GM-A5602 have?

Pioneer GM-A5602 has 2 amplifier channels. This means that it can support audio output for 2 separate speakers or subwoofers, providing a versatile setup for the user.

What is the RMS power output per channel at 4 Ohm for Pioneer GM-A5602?

The RMS power output per channel at 4 Ohm for Pioneer GM-A5602 is 300 Watts. While this may not be as high as the maximum power output, it still ensures a decent audio performance for the user.

What is the bridged output power (max) for Pioneer GM-A5602?

The bridged output power (max) for Pioneer GM-A5602 is 900 Watts. This means that when the receiver is bridged, combining the power of both channels into a single channel, it can deliver a high level of audio power for a single speaker or subwoofer.

What is the signal-to-noise ratio (SNR) for Pioneer GM-A5602?

The signal-to-noise ratio (SNR) for Pioneer GM-A5602 is 96 dB. This is a relatively high SNR, indicating that the receiver can effectively minimize background noise and deliver clean and clear audio to the user.

How do I identify the different switches and controls on the Pioneer GM-A5602 receiver?

To identify the different switches and controls on the Pioneer GM-A5602 receiver, follow these steps: 1. Front and Rear Sides: Familiarize yourself with the front and rear sides of the GM-A5602 receiver. On the front side, you will find various switches and controls that are essential for operation. 2. LPF (Low-Pass Filter) Switch: Locate the LPF switch on the front side of the receiver. This switch is used to adjust the settings based on the connected speaker. If you have a subwoofer connected, select the "ON" position to eliminate high-range frequencies and output low-range frequencies. If you have a full-range speaker connected, select the "OFF" position to output the entire frequency range. 3. FREQ (Cut Off Frequency) Control: Find the FREQ control on the front side of the receiver. This control allows you to adjust the cut-off frequency. If the LPF select switch is set to "ON," you can select a cut-off frequency ranging from 40 Hz to 500 Hz. 4. BASS BOOST (Bass Boost Level Control) Switch: Locate the BASS BOOST switch on the front side of the receiver. This switch enables you to select the desired bass boost level. You can choose from three options: 0 dB, 6 dB, or 12 dB. 5. GAIN (Gain) Control: Find the GAIN control on the front side of the receiver. This control is used to adjust the gain level. If the output remains low even when you increase the volume of your car stereo, turn the GAIN control to a lower level. If distortion occurs when you increase the car stereo volume, adjust the GAIN control to a higher level. By following these steps, you can easily identify and understand the different switches and controls on the Pioneer GM-A5602 receiver.

What should I do if the LPF switch on the Pioneer GM-A5602 receiver is not working properly?

If the LPF switch on the Pioneer GM-A5602 receiver is not working properly, you can try the following steps to troubleshoot the issue: 1. Check the Connection: Ensure that the receiver is properly connected to the power source and the speakers. Make sure all the cables are securely plugged in. 2. Clean the Switch: If the LPF switch feels sticky or unresponsive, gently clean it using a soft cloth or cotton swab. Avoid using any liquid cleaners or abrasive materials that may damage the switch. 3. Toggle the Switch: Try toggling the LPF switch back and forth a few times. Sometimes, the switch may get stuck or have a loose connection, and this can help restore its functionality. 4. Reset the Receiver: If the issue persists, you can try resetting the receiver to its factory settings. Refer to the receiver's manual for instructions on how to perform a reset. 5. Contact Customer Support: If none of the above steps resolve the issue, it is recommended to contact Pioneer customer support for further assistance. They can provide specific troubleshooting steps or guide you through the repair process if necessary. By following these steps, you can troubleshoot the LPF switch issue on the Pioneer GM-A5602 receiver.

How do I adjust the cut-off frequency using the FREQ control on the Pioneer GM-A5602 receiver?

To adjust the cut-off frequency using the FREQ control on the Pioneer GM-A5602 receiver, follow these steps: 1. Locate the FREQ control on the front side of the receiver. It is labeled as "FREQ" and is usually positioned near the LPF switch. 2. Turn the FREQ control knob clockwise or counterclockwise to adjust the cut-off frequency. The cut-off frequency can be selected within the range of 40 Hz to 500 Hz. 3. If you have the LPF switch set to "ON," the cut-off frequency will affect the low-pass filter. This means that frequencies below the selected cut-off frequency will pass through to the connected subwoofer. 4. If you have the LPF switch set to "OFF," the cut-off frequency will not have any effect since the full frequency range will be outputted to the connected full-range speaker. 5. Adjust the FREQ control according to your preference and the characteristics of your speakers. Experiment with different cut-off frequencies to find the desired balance between low-frequency response and overall sound quality. By following these steps, you can easily adjust the cut-off frequency using the FREQ control on the Pioneer GM-A5602 receiver.

What should I do if the bass boost level is not changing when I use the BASS BOOST switch on the Pioneer GM-A5602 receiver?

If the bass boost level is not changing when you use the BASS BOOST switch on the Pioneer GM-A5602 receiver, you can try the following steps to troubleshoot the issue: 1. Check the Connection: Ensure that the receiver is properly connected to the power source and the speakers. Make sure all the cables are securely plugged in. 2. Verify the BASS BOOST Switch Position: Double-check that the BASS BOOST switch is set to the desired level. The switch has three options: 0 dB, 6 dB, or 12 dB. Make sure the switch is not stuck or in-between positions. 3. Clean the Switch: If the BASS BOOST switch feels sticky or unresponsive, gently clean it using a soft cloth or cotton swab. Avoid using any liquid cleaners or abrasive materials that may damage the switch. 4. Adjust the GAIN Control: The bass boost level may not be noticeable if the GAIN control is set too low. Increase the GAIN control gradually to see if it affects the bass boost level. 5. Test with Different Audio Sources: Try playing different audio sources to ensure that the issue is not specific to a particular source. Sometimes, certain audio recordings may not have prominent bass frequencies. If the issue persists after following these steps, it is recommended to contact Pioneer customer support for further assistance. They can provide specific troubleshooting steps or guide you through the repair process if necessary.

How do I adjust the GAIN control on the Pioneer GM-A5602 receiver if the output level is too low?

To adjust the GAIN control on the Pioneer GM-A5602 receiver if the output level is too low, follow these steps: 1. Locate the GAIN control on the front side of the receiver. It is labeled as "GAIN" and is usually positioned near the other switches and controls. 2. Turn the GAIN control knob clockwise to increase the gain level. Start by making small adjustments and gradually increase the gain until the desired output level is achieved. 3. If the output level is still too low after increasing the gain, check the input signal level. Ensure that the audio source (such as a car stereo) is set to an appropriate volume level and is providing a strong enough signal to the receiver. 4. If necessary, adjust the volume level of the audio source to a higher setting. This will increase the input signal level and subsequently improve the output level of the receiver. 5. Continue adjusting the GAIN control and the volume level of the audio source until the desired output level is achieved without distortion or clipping. By following these steps, you can effectively adjust the GAIN control on the Pioneer GM-A5602 receiver to increase the output level if it is too low.

Is the manual of the Pioneer GM-A5602 available in English?

Yes, the manual of the Pioneer GM-A5602 is available in English .

Is your question not listed? Ask your question here

No results