Pioneer FS-SW40 manual

Pioneer FS-SW40
7.4 · 2
PDF manual
 · 20 pages
English
manualPioneer FS-SW40
Instruction Manual
Manuel d’instructions / Manual de Instrucciones / Manuale di istruzioni /
Bedienungsanleitung / Gebruiksaanwijzing
Wireless Subwoofer
FS-SW40

Connect the power cords of all speakers to be

used before turning the CONTROLLER on.

Branchez les cordons d'alimentation de toutes les enceintes à utiliser avant de mettre en marche le CONTROLLER. / Conecte los cables de
alimentación de todos los altavoces que vaya a utilizar antes de encender el CONTROLLER. / Collegare i cavi di alimentazione di tutti i
diffusori prima di accendere il CONTROLLER. / Schließen Sie die Netzkabel aller Lautsprecher an, die Sie verwenden möchten, bevor Sie
den CONTROLLER einschalten. / Sluit de snoeren van alle luidsprekers die gebruikt moeten worden aan voordat u de CONTROLLER
aanzet.
En : 9
Fr : 10
Es : 11
It : 12
De : 13
Nl : 14
It
En
Fr
Es
De
Nl
SN29402332_FS-SW40_U6_1605xx.book 1 ージ 016年5月20日 金曜日 午後8時44

View the manual for the Pioneer FS-SW40 here, for free. This manual comes under the category speakers and has been rated by 2 people with an average of a 7.4. This manual is available in the following languages: English. Do you have a question about the Pioneer FS-SW40 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandPioneer
ModelFS-SW40 | FS-SW10-W
Productspeaker
EAN4573211151176
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Features
Product colorWhite
Subwoofer
Subwoofer type-
Subwoofer RMS power150 W
Subwoofer frequency range35 - 100 Hz
Impedance4 Ω
Subwoofer driver diameter (imperial)8 "
Subwoofer driver diameter20 mm
Power
AC input frequency50 - 60 Hz
AC input voltage100 - 240 V
Power consumption (typical)38 W
Power source typeAC
Power consumption (standby)2.1 W
Weight & dimensions
Subwoofer width271 mm
Subwoofer depth277 mm
Subwoofer height335 mm
Subwoofer weight7200 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer FS-SW40 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is the RMS power of the Pioneer FS-SW40 subwoofer?

The RMS power of the Pioneer FS-SW40 subwoofer is 150 W. This means it delivers a powerful and dynamic audio experience for the user.

What is the impedance of the Pioneer FS-SW40?

The impedance of the Pioneer FS-SW40 is 4 Ω. This indicates that it is compatible with a wide range of audio devices and can provide a balanced and clear sound output.

What is the diameter of the subwoofer driver in inches for the Pioneer FS-SW40?

The diameter of the subwoofer driver in inches for the Pioneer FS-SW40 is 8". This size ensures a deep and immersive bass performance.

What is the power consumption (typical) of the Pioneer FS-SW40?

The power consumption (typical) of the Pioneer FS-SW40 is 38 W. This means that it is energy-efficient and can be used for longer periods without significantly increasing electricity bills.

What is the height of the subwoofer for the Pioneer FS-SW40?

The height of the subwoofer for the Pioneer FS-SW40 is 335 mm. This compact size allows for convenient placement in various rooms or home entertainment setups.

How do I troubleshoot if the Pioneer FS-SW40 speaker is not pairing with the Controller?

To troubleshoot if the Pioneer FS-SW40 speaker is not pairing with the Controller, follow these steps: 1. Ensure that the power cord of the speaker is properly connected. 2. Refer to the Quick Start Guide for FS-W40 to connect the Controller and turn on the power. 3. On the television, the Initial Setup screen will be displayed automatically. Use the cursors and ENTER buttons on the remote controller to follow the on-screen instructions and complete the settings. 4. If you are adding the FS-SW40 speaker later, connect its power cord and set the input selector on the TV to the position where the Controller is connected. 5. Press the SETUP button on the remote controller and use the cursor and ENTER buttons to select "Wireless Speaker" > "Scan" > "Next" on the TV screen. 6. When the speaker is detected, select "Save" to save the pairing information. 7. Check the CONNECT LED on the speaker. It should light blue when pairing is complete. If it flashes red, it means the speaker is unpaired with the Controller. 8. If the troubleshooting steps above do not resolve the issue, please refer to the manual for further assistance. Please note that these steps are based on the information provided in the manual for the Pioneer FS-SW40 speaker.

Why is the CONNECT LED on the Pioneer FS-SW40 speaker flashing red?

The CONNECT LED on the Pioneer FS-SW40 speaker flashes red when it is unpaired with the Controller. To troubleshoot this issue, follow these steps: 1. Ensure that the power cord of the speaker is properly connected. 2. Check if the Controller is turned on and functioning properly. 3. Press the SETUP button on the remote controller. 4. Use the cursor and ENTER buttons on the remote controller to select "Wireless Speaker" > "Scan" > "Next" on the TV screen. 5. Wait for the Controller to detect the speaker. 6. Once the speaker is detected, select "Save" to save the pairing information. 7. Check the CONNECT LED on the speaker. It should light blue when the pairing is complete. 8. If the CONNECT LED continues to flash red, try resetting the speaker and the Controller by turning off the power and then turning it back on. 9. If the issue persists, refer to the manual for further troubleshooting steps or contact customer support for assistance. Please note that these steps are based on the information provided in the manual for the Pioneer FS-SW40 speaker.

What should I do if I need to submit the Pioneer FS-SW40 speaker for repairs?

To submit the Pioneer FS-SW40 speaker for repairs, follow these steps: 1. Ensure that you have the necessary information for the repair process, such as the purchase receipt, warranty information, and any relevant documentation. 2. Contact the authorized service center or dealer where you purchased the speaker. Provide them with the details of the issue you are experiencing. 3. Follow their instructions regarding the repair process. They may ask you to bring the speaker to their service center or provide you with shipping instructions if it needs to be sent for repairs. 4. Pack the speaker securely in its original packaging or suitable packaging to prevent any damage during transportation. 5. Include all the required documents, such as the purchase receipt and warranty information, with the speaker. 6. Follow the shipping instructions provided by the authorized service center or dealer, if applicable. 7. Track the shipment if possible to ensure it reaches the service center safely. 8. Once the speaker is received by the service center, they will assess the issue and perform the necessary repairs. 9. Depending on the warranty coverage and the nature of the repair, the service center will either repair or replace the speaker. 10. Once the repairs are completed, the service center will notify you and arrange for the return of the speaker. Please note that the specific steps may vary depending on the authorized service center or dealer. It is recommended to refer to the manual or contact the service center directly for detailed instructions on submitting the Pioneer FS-SW40 speaker for repairs.

How can I troubleshoot if the speaker pairing status on the Pioneer FS-SW40 speaker is not correct?

To troubleshoot if the speaker pairing status on the Pioneer FS-SW40 speaker is not correct, follow these steps: 1. Ensure that the power cord of the speaker is properly connected. 2. Check if the Controller is turned on and functioning properly. 3. Press the SETUP button on the remote controller. 4. Use the cursor and ENTER buttons on the remote controller to select "Wireless Speaker" > "Scan" > "Next" on the TV screen. 5. Wait for the Controller to detect the speaker. 6. Once the speaker is detected, select "Save" to save the pairing information. 7. Check the CONNECT LED on the speaker. It should light blue when the pairing is complete. 8. If the speaker pairing status is still not correct, try resetting the speaker and the Controller by turning off the power and then turning it back on. 9. If the issue persists, check if there are any obstacles or interference between the speaker and the Controller, such as walls or other electronic devices. 10. If necessary, refer to the manual for further troubleshooting steps or contact customer support for assistance. Please note that these steps are based on the information provided in the manual for the Pioneer FS-SW40 speaker.

What should I do if I am experiencing issues with the placement of the Pioneer FS-SW40 speaker?

If you are experiencing issues with the placement of the Pioneer FS-SW40 speaker, follow these steps to troubleshoot the problem: 1. Ensure that the speaker is placed on a flat and stable surface. 2. Check if there is enough space around the speaker for proper ventilation. Leave at least 10 cm of space at the top, rear, and each side of the speaker to improve heat radiation. 3. Avoid placing any objects on top of the speaker or blocking the ventilation slots and openings. This can cause overheating and affect the performance of the speaker. 4. If you are using non-magnetic shielded speakers, try moving them away from your TV or monitor. If discoloration occurs, turn off the TV or monitor, wait for 15 to 30 minutes, and then turn it back on. This activates the degaussing function, which neutralizes the magnetic field and removes any discoloration effects. 5. Ensure that the speaker is not placed on the power cord or pinched by any furniture or objects. This can damage the power cord and pose a fire hazard. 6. Avoid climbing or sitting on the speaker to prevent any damage or potential injury. By following these steps, you can troubleshoot placement issues with the Pioneer FS-SW40 speaker and ensure optimal performance.

Is the manual of the Pioneer FS-SW40 available in English?

Yes, the manual of the Pioneer FS-SW40 is available in English .

Is your question not listed? Ask your question here

No results