Pioneer Elite VSX-LX505 manual

Pioneer Elite VSX-LX505
7.5 · 1
PDF manual
 · 212 pages
English
manualPioneer Elite VSX-LX505
178

Tr oubleshooting

Troubleshooting

Power

When the power is turned on, "AMP Diag Mode" appears on the display of the main unit
The protection circuit function may have operated. If the unit suddenly enters the standby state and "AMP Diag Mode" appears on the display
of the main unit when the power is turned on again, this function is diagnosing whether or not the main unit is malfunctioning or there is an
abnormality with the speaker cable connection. When the diagnosis is complete, the following messages are displayed.
CH SP WIRE
If the unit returns to the normal ON state after "CH SP WIRE" appears on the display, the speaker cable may have
been short-circuited. After setting the power of this unit to standby state, connect the speaker cable again. Twist the
wires exposed from the tip of the speaker cable so that the wires do not stick out of the speaker terminal.
NG: 
If the operation has stopped with "NG" displayed on the display, set the power of this unit to standby state immediately
and remove the power plug from the outlet. The unit may be malfunctioning. Consult a dealer.

The unit turns off unexpectedly

The unit automatically switches to standby when the "System Setup" - "Hardware" - "Power Management" - "Auto Standby" setting in the Home
screen functions.
The protection circuit function may have operated due to an abnormal rise in temperature of the unit. In such a case, the power turns off
repeatedly even if the power is turned on each time. Secure sufcient ventilation space around the unit, wait for a while until the temperature of
the unit decreases. Then, turn the power on again.
WARNING: If smoke, smell or abnormal noise is produced by the unit, unplug the power cord from the outlet immediately, and contact the dealer or
our company's support.
( p144)

Audio

Make sure that the speaker setup microphone is no longer connected.
Conrm that the connection between the output jack on the connected device and the input jack on this unit is correct.
Make sure that none of the connecting cables are bent, twisted, or damaged.
If "MUTING" is displayed on the display and is blinking, press on the remote controller to cancel muting.
While headphones are connected to the PHONES jack, no sound is output from the speakers.
When "System Setup" - "Source" - "Audio Select" - "Fixed PCM" in the Home Menu is set to "On", no sound is played when signals other than
PCM are input. Change the setting to "Off".
Check the following if the problem persists after you have conrmed the above.

View the manual for the Pioneer Elite VSX-LX505 here, for free. This manual comes under the category receivers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Pioneer Elite VSX-LX505 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 3
L
Lawrence JacksonFebruary 24, 2024

When I calibrate the system once it turn off it loses the clarity when it is turn back on have to tweak it to get back the clarity?

S
Susan CooneySeptember 12, 2023
J
Jethro boNovember 21, 2023

Power not coming on

The Pioneer Elite VSX-LX505 is a receiver that offers a range of features for audio enthusiasts. It is designed to deliver high-quality and immersive sound experiences. One notable feature of the Pioneer Elite VSX-LX505 is its advanced audio processing capabilities. It supports various audio formats, including Dolby Atmos and DTS:X, which provide a three-dimensional soundstage. Additionally, it has built-in support for Hi-Res Audio, ensuring high-fidelity playback of music files. The receiver offers multiple connectivity options, including HDMI and Wi-Fi, allowing for seamless integration with various devices. It supports 4K Ultra HD video pass-through, enabling the transmission of pristine video quality to a compatible television or projector. The Pioneer Elite VSX-LX505 also has a user-friendly interface, with a graphical on-screen display that makes it easy to navigate and access different settings. It features a simple and intuitive remote control, ensuring convenient operation. With a robust construction and high-quality components, the Pioneer Elite VSX-LX505 is built to last. It offers ample power output, allowing it to drive even demanding speakers with ease. Overall, the Pioneer Elite VSX-LX505 is a versatile and capable receiver that offers a range of features to enhance the audio experience. Whether used for home theater systems or hi-fi audio setups, it delivers impressive performance and functionality.

General
BrandPioneer
ModelElite VSX-LX505
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF), Datasheet (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer Elite VSX-LX505 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How can I connect my speakers to the Pioneer Elite VSX-LX505 receiver?

Ensure that you are using compatible speaker cables and connect them to the corresponding speaker terminals on the back of the receiver. Make sure to match the positive (+) and negative (-) terminals correctly for optimal sound quality.

How do I calibrate the audio settings on the Pioneer Elite VSX-LX505?

Access the receiver's setup menu and navigate to the audio settings. Use the built-in microphone or an external calibration microphone to perform an automatic speaker setup. This will optimize the audio output based on your room's acoustic characteristics.

Can I connect my TV to the receiver using HDMI cables?

Absolutely! HDMI cables provide the best audio and video quality. Connect one end of the HDMI cable to the HDMI output port on your TV, and the other end to any of the HDMI input ports on the receiver.

How can I program the remote control to operate my other devices?

On the remote control, press the "Setup" button and navigate to the "Remote Control Setup" menu. Follow the on-screen instructions to select the device type and enter the corresponding manufacturer code, allowing you to control your other devices with the receiver's remote.

Is it possible to stream music wirelessly to the Pioneer Elite VSX-LX505?

Yes, indeed! The receiver supports various wireless streaming protocols like Bluetooth and Wi-Fi. Access the network settings in the receiver's menu and connect to your wireless network. This will enable you to stream music from your smartphone, tablet, or other compatible devices directly to the receiver.

Is the manual of the Pioneer Elite VSX-LX505 available in English?

Yes, the manual of the Pioneer Elite VSX-LX505 is available in English .

Is your question not listed? Ask your question here

No results