Pioneer Elite VSX-LX305 manual

Pioneer Elite VSX-LX305
9.8 · 2
PDF manual
 · 192 pages
English
manualPioneer Elite VSX-LX305
135

Setup

Full Auto MCACC

Place the supplied speaker setup microphone in the listening position, measure
the test tones emitted by the speakers, then the unit automatically sets the
optimum volume level for each speaker, the crossover frequencies, and the
distance from the listening position. This also reduces the effect of the standing
wave in accordance with the viewing environment and automatically adjusts the
equalizers for the speakers and enables correction of distortion caused by the
acoustic environment of the room.
Calibration takes between 3 and 12 minutes to be completed. The speakers
emit the test tone at high volume during measurement, so be careful of your
surroundings. Keep the room as quiet as possible during measurement.
If you connect a subwoofer, check the power and volume of the subwoofer.
Set the subwoofer volume to more than half.
If the power of this unit suddenly turns off, the wires in the speaker cables
have touched the rear panel or other wires, and the protection circuit is
working. Twist the wires again securely, and make sure they do not stick out
of the speaker terminals when connecting.
If Full Auto MCACC has been executed, the speaker calibration made with
Dirac Live ( p150, p154) is disabled.
1. Select the connected speaker conguration.
Height 1 Speaker
Height 2 Speaker
Top Middle
Zone 2 Preout
Zone 2
7.1.2 ch
Zone Speaker
Note that the image on the screen changes each time you select the number
of channels in "Speaker Channels".
2. Place the supplied speaker setup microphone at the listening position, and
connect it to the SETUP MIC jack on the main unit.

SETUP MIC

When placing the speaker setup microphone on a tripod, refer to the
illustration.
3. Conrm a test tone is output from the subwoofer and press ENTER.
4. Press ENTER. Then, test tones are output from each speaker, and the
connected speakers and the noise in the surrounding environment are
automatically measured.
5. The measurement results in step 4 are displayed. If there is no problem in
the detection result of the speaker, select "Next" and press ENTER to output
the test tone again to automatically set the settings such as volume level,
crossover frequency, etc., to their optimum. (The test tone is automatically
output when 10 seconds has elapsed without any operation.)
When an error message is displayed or when the connected speakers
cannot be detected, perform re-measurement by selecting "Retry" and
pressing ENTER.
When it cannot be resolved by performing the re-measurement, conrm
if the speakers are connected correctly. If there is any problem with the
speaker connection, perform the connection after disconnecting the power
cord.
6. Once the measurement is completed, it is possible to perform the
measurement in 8 additional listening positions. To perform the measurement,
select "Next" and press ENTER, then follow the instructions. To not perform
the measurement, select "Finish (Calculate)" and press ENTER.
After each listening position is detected, select "Finish (Calculate)" and
press ENTER to complete the detection process.
7. Disconnect the speaker setup microphone.

View the manual for the Pioneer Elite VSX-LX305 here, for free. This manual comes under the category receivers and has been rated by 2 people with an average of a 9.8. This manual is available in the following languages: English. Do you have a question about the Pioneer Elite VSX-LX305 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 2
R
Richard Asmus December 31, 2022

How do I make sure all speakers are being used? Pioneer Elite vsx-lx305, 7.1 sound system

C
Cindy WermskeMarch 14, 2024

How to turn off the SAP

The Pioneer Elite VSX-LX305 is a receiver that is designed to provide high-quality audio performance and seamless integration with various multimedia devices. With its advanced technology and features, this receiver allows for immersive audio experiences without compromising on sound quality. The receiver supports a wide range of audio formats, including Dolby Atmos and DTS:X, which enable a three-dimensional sound experience. It offers multiple channels of amplification to deliver powerful and accurate audio reproduction. Equipped with HDMI ports, the Pioneer Elite VSX-LX305 allows for seamless connectivity with various devices, including TVs, gaming consoles, and media players. It supports 4K Ultra HD video pass-through, ensuring crisp and clear visuals with compatible displays. The receiver also features built-in Wi-Fi and Bluetooth capabilities, enabling wireless streaming of music and other media content from compatible devices. It supports popular streaming services such as Spotify, Pandora, and TIDAL, providing a wide range of entertainment options. Additionally, the Pioneer Elite VSX-LX305 includes multiple audio inputs and outputs, as well as USB ports, allowing for flexible connectivity options. It also supports multi-zone audio, allowing you to enjoy different audio sources in different areas of your home. Overall, the Pioneer Elite VSX-LX305 is a feature-rich receiver that offers exceptional audio performance and seamless integration with various multimedia devices. Its advanced technology and versatile connectivity options make it a reliable choice for audiophiles and home entertainment enthusiasts.

General
BrandPioneer
ModelElite VSX-LX305
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer Elite VSX-LX305 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How do I connect my speakers to the Pioneer Elite VSX-LX305 receiver?

Make sure to use high-quality speaker cables and connect them to the corresponding speaker terminals on the back of the receiver, matching the polarity (+/-) correctly.

How can I set up my surround sound system with this receiver?

Navigate to the receiver's menu and select the "Speaker Setup" option. Follow the on-screen instructions to specify the speaker sizes, distances, and crossover settings to achieve optimal surround sound performance based on your speaker setup.

What is the proper way to calibrate the audio settings on the Pioneer Elite VSX-LX305?

Utilize the built-in MCACC (Multi-Channel Acoustic Calibration) feature. Place the provided microphone at your main listening position, initiate the calibration process through the receiver's menu, and allow the system to automatically analyze and adjust various audio parameters for optimal sound reproduction in your specific room environment.

How can I connect external devices, such as a gaming console or Blu-ray player, to this receiver?

Identify the appropriate HDMI input ports on the back of the receiver and connect your external devices using HDMI cables. Ensure you select the correct HDMI input source on the receiver's front panel or remote control to access the desired device.

Is it possible to control the Pioneer Elite VSX-LX305 receiver using my smartphone or tablet?

Yes, this receiver supports network connectivity and offers control via the Pioneer Remote App, available for both iOS and Android devices. Simply download the app, connect your device to the same network as the receiver, and enjoy comprehensive control of the receiver's functions, settings, and playback options from your mobile device.

Is the manual of the Pioneer Elite VSX-LX305 available in English?

Yes, the manual of the Pioneer Elite VSX-LX305 is available in English .

Is your question not listed? Ask your question here

No results