surround back channel when playing various kinds of
sources (
=Sound plays through surround back
speaker(s)).
•Press
RECEIVER
then press
SB ch
(SB ch
PROCESSING) repeatedly to cycle the surround back
channel options.
Each press cycles through the options as follows:
•SBch ON – 6.1 or 7.1 decoding is always used (for
example, a surround back channel will be generated
for 5.1 encoded material)
•SBch AUTO – Automatically switches to 6.1 or 7.1
decoding for 6.1 encoded sources (for example,
Dolby Digital EX or DTS-ES)
•SBch OFF – Maximum 5.1 playback
Using the Virtual Surround Back mode
When you’re not using surround back speakers,
selecting this mode allows you to hear a virtual surround
back channel through your surround speakers. You can
choose to listen to sources with no surround back
channel information, or if the material sounds better in
the format (for example, 5.1) for which it was originally
encoded, you can have the receiver only apply this effect
to 6.1 encoded sources like Dolby Digital EX or DTS-ES.
1
The table indicates when you will hear the virtual
surround back channel (
=Virtual surround back
channel is active).
•Press
RECEIVER
then press
SB ch
(SB ch
PROCESSING) repeatedly to cycle the virtual surround
back channel options.
Each press cycles through the options as follows:
•VirtualSB ON – Virtual Surround Back is always used
(for example, on 5.1 encoded material)
•VirtualSB AUTO – Virtual Surround Back is
automatically applied to 6.1 encoded sources (for
example, Dolby Digital EX or DTS-ES)
•VirtualSB OFF – Virtual Surround Back mode is
switched off
ANALOG
AT T
MIDNIGHT/
LOUDNESS
DIMMER
SLEEPSB ch
SR+
DIALOG EPHASE
S.RETRIEVER
TVDVR 1
TV CTRL
CD
RECEIVER
TUNERiPod
DVD
ZONE 2
CD-R/TAPE
DVR 2
XM RADIO
SIRIUS
Note
1• You can’t use the Virtual Surround Back mode when the headphones are connected to this receiver or when any of the THX, XM HD Surround, stereo,
Front Stage Surround Advance or Stream Direct mode is selected.
• You can only use the Virtual Surround Back mode if the surround speakers are on and the Surr Back setting is set to NO in the Speaker Setting on
page 40.
• Depending on the input signal and the listening mode, the Virtual Surround Back mode may not be effective.
Type of source
SBch
Processing /
Virtual SB
mode
Standard / THX
Advanced
surround
Multichannel
sources
Stereo sources
2Pro Logic IIx2Pro LogicNeo:6
Dolby Digital EX/DTS-ES/WMA9 Pro encoded
multichannel sources with 6.1ch surround
ON
b
AUTO
b
Dolby Digital/DTS/WMA9 Pro encoded
multichannel sources
ON
b
AUTO
b
Dolby Digital/DTS/PCM/WMA9 Pro encoded
stereo sources
ON
a,b
b
AUTO
c
b
Analog 2-channel (stereo) sourcesON
a
AUTO
c
a.Only applicable when using the Virtual Surround Back mode.
b.Excluding the WMA9 Pro format.
c.Not applicable when using the Virtual Surround Back mode.
VSX-90TXV_KU.book Page 31 Friday, March 16, 2007 5:46 PM
View the manual for the Pioneer Elite VSX-90TXV here, for free. This manual comes under the category Receivers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Pioneer Elite VSX-90TXV or do you need help? Ask your question here
Do you have a question about the Pioneer and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Pioneer owners to provide you with a good answer.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer Elite VSX-90TXV below.
When is my volume too loud?
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
Can bluetooth devices of different brands be connected to each other?
Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.
What is bluetooth?
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
What is HDMI?
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
How can I best clean my Receiver?
A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.
Wat is Dolby Atmos?
Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.
Is the manual of the Pioneer Elite VSX-90TXV available in English?
Yes, the manual of the Pioneer Elite VSX-90TXV is available in English .
Need help?
Do you have a question about the Pioneer and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Pioneer owners to provide you with a good answer.
Number of questions: 0