Pioneer Elite VSX-45 manual

Pioneer Elite VSX-45
8.9 · 2
PDF manual
 · 143 pages
English
manualPioneer Elite VSX-45
89
Using other functions
10

Setting the Audio options

There are a number of additional sound settings you can make using the AUDIO PARAMETER menu. The
defaults, if not stated, are listed in bold. Important
! Note that if a setting doesn’t appear in the AUDIO PARAMETER menu, it is unavailable due to the current
source, settings and status of the receiver.1 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and then press AUDIO P..
2 Use i/j to select the setting you want to adjust.
Depending on the current status/mode of the receiver, certain options may not be able to be selected. Check the table below for notes on this.
3 Use k/l to set as necessary.
See the table below for the options available for each setting.4 Press RETURN to confirm and exit the menu.
Audio parameter menu
Setting What it does Option(s)
MCACC
(MCACC preset)
Selects your favorite MCACC preset memory when multiple preset
memories are saved. When an MCACC preset memory has been
renamed, the given name is displayed.
c M1. MEMORY 1 to
M6. MEMORY 6 d
Default:
M1. MEMORY 1
EQ
(Acoustic Calibration EQ)
Switches on/off the effects of EQ Pro.
ON
OFF
S-WAVE
(Standing Wave)
Switches on/off the effects of Standing Wave Control.
ON
OFF
PHASE
(Phase Control)
Switches on/off the effects of Phase Control (page 76 ).
It is automatically set to FULLBND when Full Band Phase Control
measurement is performed (page 77 ). You cannot select FULLBND
before the measurement.
FULLBND
<a>
ON
OFF
PHASE C+
(Phase Control Plus)
For discs created with standards other than Phase Control, the LFE
channel is delayed upon recording in the first place. This function
corrects for phase shifting on such discs.
This function is particularly effective when playing multi-channel
music containing low frequency effects (LFE).
When AUTO is selected, not only the low range delay but also the
polarity and correlation are detected to achieve the optimum effect.
c AUTO/0 to 16 (ms) d
Default: AUTO
DELAY
(Sound Delay)
Some monitors have a slight delay when showing video, so the
soundtrack will be slightly out of sync with the picture. By adding a
bit of delay, you can adjust the sound to match the presentation of
the video.
c 0 to 800 (ms) d
Default: 0
TONE
(Tone Control)
Applies the treble and bass tone controls to a source, or bypasses
them completely.
VSX-45 only: This setting is only displayed when the listening mode is
STEREO, Auto surround (STEREO) or SOUND RETRIEVER AIR.
BYPASS
ON
Setting What it does Option(s)
BASS
<b>
Adjusts the amount of bass.
c –6 to +6 (dB) d
Default: 0 (dB)
TREBLE
<b>
Adjusts the amount of treble.
c –6 to +6 (dB) d
Default: 0 (dB)
S.RTRV
(Auto Sound Retriever)
<c>
With the Auto Sound Retriever function, DSP processing is used to
compensate for the loss of audio data upon compression, improving
the sound’s sense of density and modulation.
Also, when a player supporting the Sound Retriever Link function is
connected to the receiver by HDMI, by setting this to ON, the bitrate
information of the compressed audio file being played on the player
is acquired using the Control with HDMI function, and the sound is
optimized based on this information (Sound Retriever Link).
OFF
ON
DNR
(Digital Noise Reduction)
May improve the quality of sound in a noisy source (for example, video
tape with lots of background noise) when switched on.
This only has an effect with 2-channel signal inputs.
This mode is effective for contents with a sampling frequency of 48
kHz or less.
OFF
ON
DIALOG E
(Dialog Enhancement)
Localizes dialog in the center channel to make it stand out from other
background sounds in a TV or movie soundtrack.
c OFF/FLAT d
Default: OFF
Hi-bit24
<a>
<d>
Creates a wider dynamic range with digital sources like CDs, DVDs or
BDs. 16- and 20-bit PCM as well as compressed audio is requantized
to 24 bits, more subtle musical expression.
This mode is effective for contents with a sampling frequency of 48
kHz or less.
ON
OFF
DUAL
(Dual Mono)
Specifies how dual mono encoded Dolby Digital soundtracks should
be played. Dual mono is not widely used, but is sometimes necessary
when two languages need to be sent to separate channels.
CH1 – Channel 1 is
heard only
CH2 – Channel 2 is
heard only
CH1 CH2 – Both chan-
nels heard from front
speakers
SIGSEL
(Signal Select)
Use to switch the input signal type (analog/digital/HDMI) (page 76 ).
AUTO
ANALOG
DIGITAL
<e>
HDMI
Fixed PCM
This is useful if you find there is a slight delay before OFF recognizes
the PCM signal on a CD, for instance.
When ON is selected, noise may be output during playback of non-
PCM sources. Please select another input signal if this is a problem.
OFF
ON
DRC
(Dynamic Range Control)
<f>
Adjusts the level of dynamic range for movie soundtracks optimized
for Dolby Digital, DTS, Dolby Digital Plus, Dolby TrueHD, DTS-HD and
DTS-HD Master Audio (you may need to use this feature when listen-
ing to surround sound at low volumes).
AUTO
MAX
MID
OFF
Loud Mgmt
(Loudness Management)
This is a setting of the post process function of the Dolby TrueHD
decoder. By setting to OFF, you can enjoy higher sound quality.
This can only be set when DRC is set to OFF and the input signal is a
Dolby TrueHD signal.
ON
OFF
 

View the manual for the Pioneer Elite VSX-45 here, for free. This manual comes under the category receivers and has been rated by 2 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Pioneer Elite VSX-45 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 5
P
Phillip SavageSeptember 21, 2023

Good morning, I am Savage by name. I was just thought a pioneer vsx 45 elite from Best buy I don't know if it was on sale close out or clearing but it did not come with a remote, how do I make it work?

Good morning, I am Savage by name. I was just thought a pioneer vsx 45 elite from Best buy I don't know if it was on sale clo...
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 19, 2023

To operate the Pioneer Elite VSX-45 receiver without a remote control, you can follow these steps: 1. Press the "NET" button on the receiver to switch the remote control to the network operation mode. 2. Use the available buttons on the receiver to control the basic playback functions. Note that some buttons may not be available depending on the category being played back. 3. If you wish to control the receiver from a different location or if the receiver is kept in a closed cabinet, you can connect an optional IR receiver (such as a Niles or Xantech unit) to the IR IN jack on the rear of the receiver. This will allow you to control the receiver using the IR receiver instead of the remote sensor on the front panel. 4. If you have other components connected to the receiver, you can use the 12 volt trigger feature to switch them on or off when you select an input function. To set up the 12 volt trigger, refer to the Input Setup menu. 5. Make sure to plug in the receiver after connecting all your components, including the speakers. Handle the power cord properly and avoid pulling it by tugging the cord or touching it with wet hands.

This answer is automatically generated
J
Jody Metz May 3, 2023

My vsx-45 elite amp doesn't work at all and blue light on front is blinking. What's wrong with it

R
Robert SnodgrassFebruary 25, 2023

I need some help getting sound to come from my PIONEER VSX45. Its connected to a Bravia Sony TV and the tv speakers work fine. Im missing something in the receiver set up...

F
Frank SalinasJune 22, 2023

TV Sound works but the receiver speaker can't be heard. Receiver power works

1 comment
M
Mark E DiazJanuary 24, 2024

@Frank Salinas I have a vsx 45 and I use an optical cable from the vsx 45 to my Samsung tv and switch the vsx 45 to tv and it works fine.

D
DavidAugust 10, 2022

How to fix the vlf off buttom so I can get sound again?

The Pioneer Elite VSX-45 is a receiver that offers a range of features for audio enthusiasts. It is designed to deliver high-quality sound and provide a seamless audio experience. The Pioneer Elite VSX-45 is equipped with integrated Bluetooth technology, allowing users to easily connect and stream music from compatible devices. It also supports a variety of audio formats, including Dolby TrueHD and DTS-HD Master Audio, for a more immersive listening experience. This receiver features a 5.2 channel configuration, providing ample power and flexibility for setting up a home theater system. With its 80 watts per channel, it can deliver clear and balanced audio, enhancing the overall cinematic experience. The Pioneer Elite VSX-45 includes several connectivity options, including HDMI inputs and outputs, allowing for seamless integration with other multimedia devices. Additionally, it features built-in Wi-Fi and AirPlay compatibility, providing convenient wireless streaming options. This receiver also includes advanced audio calibration technology, such as Pioneer's Multi-Channel Acoustic Calibration System (MCACC), which automatically adjusts and optimizes the audio settings based on the room's acoustics. The Pioneer Elite VSX-45 boasts a sleek and modern design, with a user-friendly interface that makes it easy to navigate through its various settings and features. Overall, the Pioneer Elite VSX-45 offers a high-quality audio experience, with its advanced features and connectivity options making it a versatile receiver for discerning audio enthusiasts.

General
BrandPioneer
ModelElite VSX-45
Productreceiver
EAN0884938290814
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer Elite VSX-45 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How can I properly connect my audio sources to the Pioneer Elite VSX-45 receiver?

To connect your audio sources, locate the audio input ports on the back of the receiver, ensure that the corresponding cables are securely plugged into the correct ports, and then adjust the input settings on the receiver accordingly for each source.

How do I adjust the audio settings on the Pioneer Elite VSX-45 receiver?

To adjust the audio settings, use the navigation buttons on the remote control or the front panel of the receiver to access the settings menu. From there, you can modify parameters such as bass, treble, balance, and surround sound options to personalize your audio experience.

What is the recommended speaker setup for the Pioneer Elite VSX-45 receiver?

For optimal sound quality, it is advised to follow the recommended speaker setup guidelines in the manual. This typically includes placing the main speakers at ear level, ensuring appropriate distance and positioning for the surround speakers, and setting up a dedicated subwoofer to enhance low-frequency performance.

How do I calibrate the room acoustics with the Pioneer Elite VSX-45 receiver?

To calibrate the room acoustics, you can utilize the built-in automatic speaker calibration feature, such as Pioneer's MCACC system. Follow the on-screen instructions and connect the included microphone to the receiver, which will measure and analyze the audio characteristics of your room to optimize the sound output.

How can I troubleshoot common issues with the Pioneer Elite VSX-45 receiver?

Troubleshooting common issues involves checking the connections, ensuring proper speaker wire polarity, and verifying that all equipment is powered on and set to the correct input/output settings. Additionally, you can perform a factory reset or consult the troubleshooting section of the manual for specific issues such as audio dropouts, remote control problems, or network connectivity concerns.

Is the manual of the Pioneer Elite VSX-45 available in English?

Yes, the manual of the Pioneer Elite VSX-45 is available in English .

Is your question not listed? Ask your question here

No results