Pioneer Elite SC-91 manual

Pioneer Elite SC-91
9.9 · 1
PDF manual
 · 124 pages
English
manualPioneer Elite SC-91
90

The MCACC PRO menu

11
Acoustic Calibration EQ Adjust
! Default setting: ON/0.0dB (all channels/bands)
Acoustic Calibration Equalization is a kind of room equalizer for your speakers (excluding the subwoofer). It
works by measuring the acoustic characteristics of your room and neutralizing the ambient characteristics
that can color the original source material (providing a ‘flat’ equalization setting). If you’re not satisfied with the
adjustment provided in Automatically conducting optimum sound tuning (Full Auto MCACC) on page 47 or
Automatic MCACC (Expert) on page 87 , you can also adjust these settings manually to get a frequency balance
that suits your tastes.
1 Select ‘EQ Adjust’ from the Manual MCACC setup menu.
2 Select the channel(s) you want and adjust to your liking.
Use i/j to select the channel.
Use k/l to select the frequency and i/j to boost or cut the EQ. When you’re finished, go back to the top of
the screen and press k to return to Ch, then use i/j to select the channel.
! The OVER! indicator shows in the display if the frequency adjustment is too drastic and might distort. If this
happens, bring the level down until OVER! disappears from the display.
3 When you’re finished, press RETURN.
You will return to the Manual MCACC setup menu.
Notes
! Changing the frequency curve of one channel too drastically will affect the overall balance. If the speaker bal-
ance seems uneven, you can raise or lower channel levels using test tones with the TRIM feature. Use k/l to
select TRIM, then use i/j to raise or lower the channel level for the current speaker.
! Speaker Setting channels set as SMALL or Dolby Sp at 63Hz cannot be selected.
! The frequencies that can be adjusted by the SW channel are 31Hz, 63Hz, 125Hz and 250Hz.
! Depending on the crossover frequency setting, some frequencies are less effective.
Acoustic Calibration EQ Professional
This setup minimizes the unwanted effects of room reverberation by allowing you to calibrate your system based
on the direct sound coming from the speakers.
Performing the Acoustic Calibration EQ Professional procedure is effective when the lower frequencies seem
overly reverberant in your listening room (i.e. it sounds ‘boomy’) as shown at Type A below, or when different
channels seem to exhibit different reverb characteristics as shown at Type B.
! Type A: Reverberance of high vs. low frequencies
Level
Acoustic Cal. EQ Pro.
calibration range
Low frequencies
High frequencies
Conventional MCACC
EQ calibration range
Time
(in msec)
0
80
160
! Type B: Reverb characteristics for different channels
Level
0
80
160
Time
(in msec)
Front L
Front R
Acoustic Cal. EQ Pro.
calibration range
Conventional MCACC
EQ calibration range
Using Acoustic Calibration EQ Professional
1 Select ‘EQ Professional’, then press ENTER.
2 Select an option and press ENTER.
! Reverb Measurement – Use this to measure the reverb characteristics before and after calibration.
! Reverb View – You can check the reverb measurements made for specified frequency ranges in each
channel.
If the Reverb View procedure is performed after the Reverb Measurement operation, depending on
the standing wave control setting, differences may appear on the reverb graph. With the Auto MCACC
function, the reverberations are measured with the standing waves controlled, so the reverb character-
istics graph shows the characteristics with the effect of the standing waves eliminated. By contrast, the
Reverb Measurement function measures the reverberations without controlling the standing waves,
so the graph indicates the reverb characteristics including the effect of the standing waves. If you wish
to check the reverb characteristics of the room itself (with the standing waves as such), we recommend
using the Reverb Measurement function.
! Advanced EQ Setup – Use this to select the time period that will be used for frequency adjustment and
calibration, based on the reverb measurement of your listening area. Note that customizing system calibra-
tion using this setup will alter the settings you made in Automatically conducting optimum sound tuning (Full
Auto MCACC) on page 47 or Automatic MCACC (Expert) on page 87 and is not necessary if you’re satis-
fied with these settings.
3 If you selected ‘Reverb Measurement’, select EQ ON or EQ OFF, and then START.
The following options determine how the reverb characteristics of your listening area are displayed in
Reverb View:
! EQ OFF – You will see the reverb characteristics of your listening area without the equalization performed by
this receiver (before calibration).
! EQ ON – You will see the reverb characteristics of your listening area with the equalization performed by this
receiver (after calibration). Note that the EQ response may not appear entirely flat due to adjustments neces-
sary for your listening area.
The calibration corresponding to the currently selected MCACC preset will be used when EQ ON is
selected. To use another MCACC preset, press MCACC to select the MCACC memory you want to store.
After auto calibration with EQ Type : SYMMETRY (Full Auto MCACC, etc.), the graph for the inferred
reverb characteristics can be displayed by selecting Reverb View. To display the actually measured
reverb characteristics after EQ calibration, measure with EQ ON.
When the reverb measurement is finished, you can select Reverb View to see the results on-screen. See
Professional Calibration EQ graphical output on page 104 for troubleshooting information.
 

View the manual for the Pioneer Elite SC-91 here, for free. This manual comes under the category receivers and has been rated by 1 people with an average of a 9.9. This manual is available in the following languages: English. Do you have a question about the Pioneer Elite SC-91 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Pioneer Elite SC-91 is a receiver that offers a range of features to enhance your home entertainment experience. With its sleek design and advanced technology, this receiver is a suitable addition to any home theater setup. One notable feature of the Pioneer Elite SC-91 is its support for 4K Ultra HD video. This means that you can enjoy high-resolution visuals with stunning clarity and detail. Additionally, it supports HDR (High Dynamic Range) content, allowing for a wider range of colors and contrast. This receiver also offers a variety of audio options. It features Dolby Atmos and DTS:X technologies, which provide immersive and three-dimensional sound. With 7.2 channels of amplification, the SC-91 can deliver powerful and clear audio. The Pioneer Elite SC-91 also includes built-in Wi-Fi and Bluetooth connectivity. This allows for easy streaming of music from your favorite devices. With support for popular streaming services such as Spotify and Pandora, you can enjoy a wide range of music options. Furthermore, this receiver features multiple HDMI inputs and outputs, making it compatible with a variety of devices such as gaming consoles and Blu-ray players. It also has USB and Ethernet ports for added connectivity options. In terms of control, the Pioneer Elite SC-91 offers a user-friendly interface and comes with a remote control. It is also compatible with smartphone apps, allowing you to control the receiver from your mobile device. Overall, the Pioneer Elite SC-91 is a versatile and feature-rich receiver that delivers high-quality audio and video performance.

General
BrandPioneer
ModelElite SC-91
Productreceiver
EAN0884938290739
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer Elite SC-91 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How do I connect my Pioneer Elite SC-91 receiver to my TV?

Ensure that you connect the HDMI cable from the HDMI OUT port on the receiver to the HDMI IN port on your TV. Use the appropriate HDMI input on your TV to enjoy high-quality audio and video.

How do I set up a surround sound system using my Pioneer Elite SC-91 receiver?

Connect the necessary speakers to the receiver using the speaker terminals labeled for each channel, ensuring the positive and negative wires match correctly. Go to the receiver's setup menu, select speaker configuration, and follow the prompts to optimize the sound for your specific speaker setup.

I'm having trouble calibrating the audio settings on my receiver. How can I adjust the equalizer?

Navigate to the receiver's setup menu and select the "Audio" or "Sound" settings. Look for the "Equalizer" option and access it to fine-tune the audio frequencies according to your preferences. Remember to listen to various content types while adjusting to ensure a balanced sound across different genres.

How can I enable zone 2 or zone 3 functionality on my Pioneer Elite SC-91 receiver?

To enable zone 2 or zone 3 playback, go to the receiver's setup menu and locate the "Multi-Zone" or "Zone 2/3" settings. Enable the desired zone by selecting it and follow the instructions to set up the audio sources and speaker outputs for each specific zone.

My receiver is not producing any sound. What could be the issue?

Check the following: 1) Ensure the speaker wires are securely connected to the correct terminals on the receiver and speakers. 2) Make sure the volume is turned up to an audible level. 3) Verify that the source you are using is producing audio. 4) Check if the speakers are set to the appropriate channels and not muted. If the issue persists, a factory reset or a professional inspection might be necessary.

Is the manual of the Pioneer Elite SC-91 available in English?

Yes, the manual of the Pioneer Elite SC-91 is available in English .

Is your question not listed? Ask your question here

No results