Pioneer Elite SC-91 manual

Pioneer Elite SC-91
9.9 · 1
PDF manual
 · 124 pages
English
manualPioneer Elite SC-91
60
Listening to your system
06
Notes
! The Front Stage Surround Advance (F.S.SURROUND) function allows you to create natural surround sound
effects using just the front speakers and the subwoofer.
! When ECO MODE 1 or ECO MODE 2 is selected, the front panel’s display lights with the dimmest brightness.
! Since ECO MODE 1 and ECO MODE 2 reduce the power consumption, the speakers are switched in function
of the number of input channels. Because of this, a speaker switching sound (clicking sound) may be pro-
duced when the number of input channels is switched. If this bothers you, switch to a different listening mode.
! When using headphones, SOUND RETRIEVER AIR (only with the BT AUDIO input), PHONES SURR,
ECO MODE 1 and ECO MODE 2 can be selected.
Using Stream Direct
Use the Stream Direct modes when you want to hear the truest possible reproduction of a source. All unneces-
sary signal processing is bypassed, and you’re left with the pure analog or digital sound source.
Processing differs depending on the input signal and whether or not surround back speakers are connected. For
details, see Auto Surround, ALC and Stream Direct with different input signal formats on page 113 .
% While listening to a source, press AUTO (AUTO SURR/ALC/STREAM DIRECT) to select the mode you want.
Check the digital format indicators in the front panel display to see how the source is being processed.
! AUTO SURROUND – See Auto playback on page 59 .
! ALC – Listening in Auto level control mode (page 59 ).
When ALC is selected, the effect level can be adjusted using the EFFECT parameter in Setting the Audio
options on page 73 .
! DIRECT – Plays back sound from the source with the least modification next to PURE DIRECT. With DIRECT,
the only modifications added to PURE DIRECT playback are calibration of the sound field by the MCACC sys-
tem and the Phase Control effect.
! PURE DIRECT – Plays back unmodified sound from source with only minimal digital treatment.
Note
When listening through headphones, you can select ALC or PURE DIRECT mode only.
About Dolby Atmos
This AV receiver supports the latest Dolby Atmos surround sound system. Dolby Atmos is a new technology in
which, through real time calculation of audio data and meta data (position and time information) included in the
audio signal, a surround sound space is achieved irrespective of the speaker layout and number of speakers.
Dolby Atmos contents are required to enjoy Dolby Atmos. For Blu-ray discs with Dolby Atmos, Dolby Atmos can
be played by connecting most conventional Blu-ray discs with this receiver using HDMI.
In addition, the following connection and settings are necessary to play Dolby Atmos.
! Any one of top-middle, surround back, or front-wide must be selected.
! The listening mode of any one of AUTO SURROUND, DIRECT, PURE DIRECT must be selected.
! Settings for RENDER must be OBJECT (page 73 ).
For details on Dolby Atmos, see page 116 .
Note
When playing back Dolby Atmos content, the program format indicator does not light (page 15 ).
Dolby Atmos’ is displayed in the display of this receiver.

Selecting MCACC presets

! Default setting: MEMORY 1
If you have calibrated your system for different listening positions, you can switch between settings to suit the
kind of source you’re listening to and where you’re sitting (for example, watching movies from a sofa, or playing a
video game close to the TV).
1 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and then press AUDIO P..2 Use i/j to select ‘MCACC’.
An indicator such as c M1. MEMORY 1 d is displayed in the front panel display.
3 Use k/l to select the setting.
Press repeatedly to select one of the six MCACC presets. See Data Management on page 92 to check and man-
age your current settings.
! These settings have no effect when headphones are connected.
! You can also press k/l to select the MCACC preset.

Choosing the input signal

On this receiver, it is possible to switch the input signals for the different inputs as described below.
! This receiver can only play back Dolby Digital, PCM (32 kHz to 192 kHz) and DTS (including DTS 96/24) digital
signal formats. The compatible signals via the HDMI terminals are: Dolby Digital, DTS, PCM (32 kHz to 192
kHz), Dolby TrueHD, Dolby Digital Plus, DTS-EXPRESS, DTS-HD Master Audio and SACD.
! You may get digital noise when an LD, CD, DVD or BD player compatible with DTS is playing an analog signal.
To prevent noise, make the proper digital connections (page 26 ) and set the signal input to DIGITAL.
! Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with
your DVD player.
1 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and then press AUDIO P..2 Use i/j to select ‘SIGSEL’.
3 Use k/l to select the input signal corresponding to the source component.
Each press cycles through the options as follows:
! AUTO – The receiver selects the first available signal in the following order: HDMI; DIGITAL; ANALOG.
! ANALOG – Selects an analog signal.
! DIGITAL – Select an optical or coaxial digital input signal. ‘DIGITL’ is displayed on the front panel display.
! HDMI – Selects an HDMI signal.
When the HDMI audio output parameter is set to THROUGH, the sound will be heard through your TV, not
from this receiver.
When set to DIGITAL, HDMI or AUTO (only selected DIGITAL or HDMI), the indicators light according to the
signal being decoded (see Display on page 15 ).
 

View the manual for the Pioneer Elite SC-91 here, for free. This manual comes under the category receivers and has been rated by 1 people with an average of a 9.9. This manual is available in the following languages: English. Do you have a question about the Pioneer Elite SC-91 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Pioneer Elite SC-91 is a receiver that offers a range of features to enhance your home entertainment experience. With its sleek design and advanced technology, this receiver is a suitable addition to any home theater setup. One notable feature of the Pioneer Elite SC-91 is its support for 4K Ultra HD video. This means that you can enjoy high-resolution visuals with stunning clarity and detail. Additionally, it supports HDR (High Dynamic Range) content, allowing for a wider range of colors and contrast. This receiver also offers a variety of audio options. It features Dolby Atmos and DTS:X technologies, which provide immersive and three-dimensional sound. With 7.2 channels of amplification, the SC-91 can deliver powerful and clear audio. The Pioneer Elite SC-91 also includes built-in Wi-Fi and Bluetooth connectivity. This allows for easy streaming of music from your favorite devices. With support for popular streaming services such as Spotify and Pandora, you can enjoy a wide range of music options. Furthermore, this receiver features multiple HDMI inputs and outputs, making it compatible with a variety of devices such as gaming consoles and Blu-ray players. It also has USB and Ethernet ports for added connectivity options. In terms of control, the Pioneer Elite SC-91 offers a user-friendly interface and comes with a remote control. It is also compatible with smartphone apps, allowing you to control the receiver from your mobile device. Overall, the Pioneer Elite SC-91 is a versatile and feature-rich receiver that delivers high-quality audio and video performance.

General
BrandPioneer
ModelElite SC-91
Productreceiver
EAN0884938290739
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer Elite SC-91 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How do I connect my Pioneer Elite SC-91 receiver to my TV?

Ensure that you connect the HDMI cable from the HDMI OUT port on the receiver to the HDMI IN port on your TV. Use the appropriate HDMI input on your TV to enjoy high-quality audio and video.

How do I set up a surround sound system using my Pioneer Elite SC-91 receiver?

Connect the necessary speakers to the receiver using the speaker terminals labeled for each channel, ensuring the positive and negative wires match correctly. Go to the receiver's setup menu, select speaker configuration, and follow the prompts to optimize the sound for your specific speaker setup.

I'm having trouble calibrating the audio settings on my receiver. How can I adjust the equalizer?

Navigate to the receiver's setup menu and select the "Audio" or "Sound" settings. Look for the "Equalizer" option and access it to fine-tune the audio frequencies according to your preferences. Remember to listen to various content types while adjusting to ensure a balanced sound across different genres.

How can I enable zone 2 or zone 3 functionality on my Pioneer Elite SC-91 receiver?

To enable zone 2 or zone 3 playback, go to the receiver's setup menu and locate the "Multi-Zone" or "Zone 2/3" settings. Enable the desired zone by selecting it and follow the instructions to set up the audio sources and speaker outputs for each specific zone.

My receiver is not producing any sound. What could be the issue?

Check the following: 1) Ensure the speaker wires are securely connected to the correct terminals on the receiver and speakers. 2) Make sure the volume is turned up to an audible level. 3) Verify that the source you are using is producing audio. 4) Check if the speakers are set to the appropriate channels and not muted. If the issue persists, a factory reset or a professional inspection might be necessary.

Is the manual of the Pioneer Elite SC-91 available in English?

Yes, the manual of the Pioneer Elite SC-91 is available in English .

Is your question not listed? Ask your question here

No results