Pioneer Elite SC-91 manual

Pioneer Elite SC-91
9.9 · 1
PDF manual
 · 124 pages
English
manualPioneer Elite SC-91
105
FAQ
13
Symptom Remedy
Noisy or distorted picture. Sometimes a video deck may output a noisy video signal (during scanning, for example),
or the video quality may just be poor (with some video game units, for example). The
picture quality may also depend on the settings, etc. of your display device. Switch off
the video converter and reconnect the source and display device using the same type of
connection (component or composite), then start playback again.
If the problem still persists when connecting your HDMI component directly to your
monitor, please consult the component or monitor manual or contact the manufacturer
for support.
Synchronized operation not possible
using Control with HDMI function.
Check the HDMI connections.
The cable may be damaged.
Select ON for the Control Mode with HDMI setting (see HDMI Setup on page 70 ).
Turn the TV’s power on before turning on this receiver’s power.
Set the TV side Control with HDMI setting to on (see TV’s operating instructions).
Connect the TV to the HDMI OUT 1 terminal and set the HDMI output to OUT 1. Then
turn on first the TV’s power, then this receiver’s power.
When HDZONE is set to ON, the
video resolution and number of
audio channels for the main zone
side changes.
This is due to the HDMI connection specifications; it is not a malfunction. When play-
ing the same input in the main zone and HDZONE, video and audio signals that can be
output in common for all the devices connected to the HDMI OUT 1 and HDMI OUT 2
(HDZONE) terminals are set.
HDZONE cannot be turned on.
Set Output Setting at MAIN/HDZONE to HDZONE (page 98 ).
When the input source for the main
or HDZONE is switched or when
the power of the respective zones is
turned on and off, the audio or video
of the HDMI output terminal that is
not being operated is sometimes
interrupted.
This is because the HDMI devices need to recognize each other again. This is not a
malfunction. If the picture is disturbed or not displayed, turn off the power of the devices
in all the zones, then try again. Also try temporarily turning the Network Standby and
Standby Through settings OFF.
Such menus as the HOME MENU as
well as the on-screen display are not
displayed for HDMI OUT 1 or HDMI
OUT 2.
Press OUT P. and switch the HDMI OUT 1/2 setting.
Cannot upscale to 4K.
Change SCAL. (page 75 )
4K video is not output even though a
4K compliant TV is connected.
When the MAIN/HDZONE setting is MAIN and the HDMI output setting is OUT 1+2 and
when the MAIN/HDZONE setting is HDZONE and HDZONE is the same input as with the
main zone, video is output with the lower resolution of the TV connected to HDMI OUT 1
and HDMI OUT 2. When there is only one 4K compliant TV, connect it to HDMI OUT 1
and set the HDMI output setting to OUT 1 or turn off HDZONE so that video is only output
to the 4K compliant TV.
Even though a 4K/60p 4:4:4 24 bit
compatible TV is connected, the
4K/60p 4:4:4 24 bit video image is not
output correctly.
Set the HDMI 4K/60p signal input setting to 4:4:4 (page 76 ).
When the HDMI cable does not support 4K/60p 4:4:4 24 bit (18 Gbps transmission), video
images may not be output properly. In that case, replace the cable with a compatible
HDMI cable or change the HDMI 4K/60p signal input setting to 4:2:0 to watch the 4K/60p
4:2:0 24 bit video image.
The HDMI OUT 2 terminal does not output a 4K/60p 4:4:4 24 bit video image if
MAIN/HDZONE is set to HDZONE. Set MAIN/HDZONE to MAIN or use the HDMI OUT
1 terminals.
You cannot input 4K/60p 4:4:4 24 bit video from HDMI IN 3 to the IN 6 terminal. Use the
BD IN, HDMI IN 1 or HDMI IN 2 terminal.
MHL
Symptom Remedy
When playing an MHL-compatible
device connected to the MHL terminal,
the Standby Through function does not
work and the power turns off.
The MHL device will not operate unless power is being supplied from this receiver. When
this receiver is in the Standby Through mode, power cannot be supplied due to reduced
power consumption. Because of this, the MHL device will not operate. This is not a mal-
function.
MHL-compatible device cannot be
operated with the remote control.
Press MHL to set the remote control to the MHL control mode.
MHL POW ERR is displayed on the
display.
There is a problem with the power supply for the MHL device. After turning OFF the
receiver, disconnect the MHL device, connect the MHL device again and then turn ON
the power of the receiver.
If the error is displayed even though the above operation is repeated several times,
there is a problem with the receiver or the MHL device. Disconnect the power cable and
request repair.

Built-in AVNavigator

Symptom Cause Remedy
AVNavigator does not inter-
act well with the receiver.
The receiver’s power is not turned on. Turn the receiver’s power on. (Wait about 60 seconds after
the power turns on for network functions to start.)
The receiver or computer is not con-
nected to the LAN.
Connect a LAN cable to the receiver or computer (page 35 ).
The router’s power is off. Turn the router’s power on.
Network connections could be
restricted due to the computer’s
network settings, security settings,
etc.
Check the computer’s network settings, security settings, etc.
In the middle of
Wiring Navi, you are
instructed to turn off the
power of the unit and then
connect other equipment or
speakers.
This is to avoid failure of the
receiver due to a short-circuit
between cables or from static
electricity.
Per the Wiring Navi instructions, turn OFF the power
of the receiver. As long as the browser has not quit,
Wiring Navi resumes guidance upon turning ON the
receiver.
When the Wiring Navi or
Interactive Operation Guide
is launched, a warning about
security protection appears
on the browser.
This is because of the browser’s
security function.
This is not a problem. Perform the operation to authorize
the blocked contents.
AVNavigator screen is not
displayed on the browser.
This receiver’s IP address has not
been entered into the browser
correctly.
Check the receiver’s IP address and enter it correctly in the
browser (page 46 ).
Receiver settings cannot be
made from a browser.
JavaScript is disabled on the inter-
net browser.
Enable JavaScript.
The browser is not compatible with
JavaScript.
Use an internet browser that is compatible with JavaScript.
 

View the manual for the Pioneer Elite SC-91 here, for free. This manual comes under the category receivers and has been rated by 1 people with an average of a 9.9. This manual is available in the following languages: English. Do you have a question about the Pioneer Elite SC-91 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Pioneer Elite SC-91 is a receiver that offers a range of features to enhance your home entertainment experience. With its sleek design and advanced technology, this receiver is a suitable addition to any home theater setup. One notable feature of the Pioneer Elite SC-91 is its support for 4K Ultra HD video. This means that you can enjoy high-resolution visuals with stunning clarity and detail. Additionally, it supports HDR (High Dynamic Range) content, allowing for a wider range of colors and contrast. This receiver also offers a variety of audio options. It features Dolby Atmos and DTS:X technologies, which provide immersive and three-dimensional sound. With 7.2 channels of amplification, the SC-91 can deliver powerful and clear audio. The Pioneer Elite SC-91 also includes built-in Wi-Fi and Bluetooth connectivity. This allows for easy streaming of music from your favorite devices. With support for popular streaming services such as Spotify and Pandora, you can enjoy a wide range of music options. Furthermore, this receiver features multiple HDMI inputs and outputs, making it compatible with a variety of devices such as gaming consoles and Blu-ray players. It also has USB and Ethernet ports for added connectivity options. In terms of control, the Pioneer Elite SC-91 offers a user-friendly interface and comes with a remote control. It is also compatible with smartphone apps, allowing you to control the receiver from your mobile device. Overall, the Pioneer Elite SC-91 is a versatile and feature-rich receiver that delivers high-quality audio and video performance.

General
BrandPioneer
ModelElite SC-91
Productreceiver
EAN0884938290739
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer Elite SC-91 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How do I connect my Pioneer Elite SC-91 receiver to my TV?

Ensure that you connect the HDMI cable from the HDMI OUT port on the receiver to the HDMI IN port on your TV. Use the appropriate HDMI input on your TV to enjoy high-quality audio and video.

How do I set up a surround sound system using my Pioneer Elite SC-91 receiver?

Connect the necessary speakers to the receiver using the speaker terminals labeled for each channel, ensuring the positive and negative wires match correctly. Go to the receiver's setup menu, select speaker configuration, and follow the prompts to optimize the sound for your specific speaker setup.

I'm having trouble calibrating the audio settings on my receiver. How can I adjust the equalizer?

Navigate to the receiver's setup menu and select the "Audio" or "Sound" settings. Look for the "Equalizer" option and access it to fine-tune the audio frequencies according to your preferences. Remember to listen to various content types while adjusting to ensure a balanced sound across different genres.

How can I enable zone 2 or zone 3 functionality on my Pioneer Elite SC-91 receiver?

To enable zone 2 or zone 3 playback, go to the receiver's setup menu and locate the "Multi-Zone" or "Zone 2/3" settings. Enable the desired zone by selecting it and follow the instructions to set up the audio sources and speaker outputs for each specific zone.

My receiver is not producing any sound. What could be the issue?

Check the following: 1) Ensure the speaker wires are securely connected to the correct terminals on the receiver and speakers. 2) Make sure the volume is turned up to an audible level. 3) Verify that the source you are using is producing audio. 4) Check if the speakers are set to the appropriate channels and not muted. If the issue persists, a factory reset or a professional inspection might be necessary.

Is the manual of the Pioneer Elite SC-91 available in English?

Yes, the manual of the Pioneer Elite SC-91 is available in English .

Is your question not listed? Ask your question here

No results