Pioneer Elite SC-91 manual

Pioneer Elite SC-91
9.9 · 1
PDF manual
 · 124 pages
English
manualPioneer Elite SC-91
101
FAQ
13

Troubleshooting

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate
the other components and electrical appliances being used. If the trouble cannot be rectified even after exercis-
ing the checks listed below, ask your nearest Pioneer authorized independent service company to carry out repair work.
! If the unit does not operate normally due to external effects such as static electricity disconnect the power plug
from the outlet and insert again to return to normal operating conditions.If the problem is not solved after the troubleshooting below, if the screen freezes unexpectedly or if the buttons on the remote control or front panel stop working completely, do the following:
! Press u STANDBY/ON on the front panel to turn off the power, then turn the power back on.
If this does not solve the problem, turn off the power again, then press and hold the u STANDBY/ON button
on the front panel for at least five seconds. (The power turns on, then turns off after five seconds.)
! If the power cannot be turned off, press and hold u STANDBY/ON on the front panel for over five seconds. The
power will turn off. In this case, the various settings made on the receiver may be cleared.

Power

Symptom Remedy
The power does not turn on. Make sure that the power cord is plugged in to an active power outlet.
Try disconnecting from the power outlet, then plugging back in.
Power automatically turns off.
When Auto Power Down is set, the power automatically turns off at the set time (page 96 ).
When the power is turned on, the
WIRELESS indicator slowly flashes.
After unpacking, turning on the power, and returning to initial factory settings (page 79 ),
the WIRELESS indicator slowly flashes. This is not a malfunction.
This receiver is designed to automatically enter WAC mode when turning on the power of
this receiver in the initial factory settings state. For details about WAC mode, please refer
to page 43 . After the network settings (page 41 ) have been completed, the WIRELESS
indicator flashing disappears.
When using the receiver without connecting to the network, set the Network Type set-
ting to Wired (page 42 ).
Power cannot be turned off.
(ZONE 2 ON is displayed.)
Press the Z2 button on the remote control for 1.5 seconds and then press the
u STANDBY/ON button to turn OFF the power.
Power cannot be turned off.
(HDZONE ON is displayed.)
Press the HDZ button on the remote control for 1.5 seconds and then press the
u STANDBY/ON button to turn OFF the power.
The receiver suddenly switches off or
the WIRELESS indicator blinks.
Check that there are no loose strands of speaker wire touching the rear panel or another
set of wires. If so, re-attach the speaker wires, making sure there are no stray strands.
The receiver may have a serious problem. Disconnect from the power and call a Pioneer
authorized independent service company.
During loud playback the power sud-
denly switches off.
Turn down the volume.
Lower the 63 Hz and 125 Hz equalizer levels in the Manual MCACC setup on page 88 .
Switch on the digital safety feature. While holding down ENTER on the front panel,
press u STANDBY/ON to set this receiver to the standby mode. Use TUNE i/j to
select D.SAFETY cOFFd, and then use PRESET k/l to select 1 or 2 (select D.SAFETY
cOFFd to deactivate this feature). If the power switches off even with 2 switched on, turn
down the volume. With 1 or 2 on, some features may be unavailable.
If there is very little low frequency information in the source material, change your
speaker settings to Front: SMALL / Subwoofer: YES, or Front: LARGE / Subwoofer: PLUS
(see Speaker Setting on page 94 ).
Symptom Remedy
The unit does not respond when the
buttons are pressed.
Try switching the receiver off, then back on again.
Try disconnecting the power cord, then connect again.
AMP ERR is indicated and the main
power turns off. The MCACC PRO
indicator blinks and the main power
does not turn on.
The receiver may have a serious problem. Do not try switching the receiver on. Unplug
the receiver from the wall and call a Pioneer authorized independent service company.
The receiver suddenly switches off or
the FL OFF indicator blinks.
There is a possibility that the power supply circuit of the receiver has failed. Wait at least
one minute and then turn ON the power again. If the same symptom appears again after
turning ON the power again, stop using the receiver, disconnect the power cable and
request repair.
AMP OVERHEAT blinks in the dis-
play and the FL OFF indicator flash
and the power turns off.
Allow the unit to cool down in a well-ventilated place before switching back on (see
Installing the receiver on page 11 ).
Check whether the cables used to connect the speakers are short-circuited.
Wait at least 1 minute, then try turning the power on again.
The temperature within the unit has exceeded the allowablevalue.
Lower the volume level.
The main power suddenly turns off,
and MCACC PRO indicator blinks.
The power unit is damaged. Unplug the receiver from the wall and call a Pioneer autho-
rized independent service company.
FAN STOP is displayed, then
WIRELESS indicator blinks.
The built-in cooling fan is malfunctioning. Do not try switching the receiver on. Unplug
the receiver from the wall and call a Pioneer authorized independent service company.
Display blinks 12V TRG ERR. An error has arisen in the 12 V trigger jacks. Reconnect accurately then turn the power
back on.

No sound

Symptom Remedy
There is no sound output, the sound
gets cut off, or there is noise present.
If Fixed PCM in audio parameter is set to ON, you will not be able to playback audio in
formats other than PCM audio. For other audio formats than PCM audio, select OFF (See
Setting the Audio options on page 73 ).
No sound is output when an input
function is selected.
Turn the volume up to approx. –30 dB.
Check that the speaker selector setting is set to OFF (page 75 ).
Make sure the correct input function is selected.
Make sure the correct input signal is selected (see Choosing the input signal on page 60 ).
Check that the source equipment is correctly connected (see Connecting your equipment
on page 19 ).
Check that the speakers are connected properly (see Connecting the speakers on page 23 ).
No sound from the surround or
center speakers.
Check that the Stereo listening mode or the Front Stage Surround Advance mode isn’t
selected; select one of the surround listening modes (see Enjoying various types of play-
back using the listening modes on page 59 ).
Check that the surround/center speakers are not set to NO (see Speaker Setting on page 94 ).
Check the speaker connections (see Connecting the speakers on page 23 ).
 

View the manual for the Pioneer Elite SC-91 here, for free. This manual comes under the category receivers and has been rated by 1 people with an average of a 9.9. This manual is available in the following languages: English. Do you have a question about the Pioneer Elite SC-91 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Pioneer Elite SC-91 is a receiver that offers a range of features to enhance your home entertainment experience. With its sleek design and advanced technology, this receiver is a suitable addition to any home theater setup. One notable feature of the Pioneer Elite SC-91 is its support for 4K Ultra HD video. This means that you can enjoy high-resolution visuals with stunning clarity and detail. Additionally, it supports HDR (High Dynamic Range) content, allowing for a wider range of colors and contrast. This receiver also offers a variety of audio options. It features Dolby Atmos and DTS:X technologies, which provide immersive and three-dimensional sound. With 7.2 channels of amplification, the SC-91 can deliver powerful and clear audio. The Pioneer Elite SC-91 also includes built-in Wi-Fi and Bluetooth connectivity. This allows for easy streaming of music from your favorite devices. With support for popular streaming services such as Spotify and Pandora, you can enjoy a wide range of music options. Furthermore, this receiver features multiple HDMI inputs and outputs, making it compatible with a variety of devices such as gaming consoles and Blu-ray players. It also has USB and Ethernet ports for added connectivity options. In terms of control, the Pioneer Elite SC-91 offers a user-friendly interface and comes with a remote control. It is also compatible with smartphone apps, allowing you to control the receiver from your mobile device. Overall, the Pioneer Elite SC-91 is a versatile and feature-rich receiver that delivers high-quality audio and video performance.

General
BrandPioneer
ModelElite SC-91
Productreceiver
EAN0884938290739
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer Elite SC-91 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

How do I connect my Pioneer Elite SC-91 receiver to my TV?

Ensure that you connect the HDMI cable from the HDMI OUT port on the receiver to the HDMI IN port on your TV. Use the appropriate HDMI input on your TV to enjoy high-quality audio and video.

How do I set up a surround sound system using my Pioneer Elite SC-91 receiver?

Connect the necessary speakers to the receiver using the speaker terminals labeled for each channel, ensuring the positive and negative wires match correctly. Go to the receiver's setup menu, select speaker configuration, and follow the prompts to optimize the sound for your specific speaker setup.

I'm having trouble calibrating the audio settings on my receiver. How can I adjust the equalizer?

Navigate to the receiver's setup menu and select the "Audio" or "Sound" settings. Look for the "Equalizer" option and access it to fine-tune the audio frequencies according to your preferences. Remember to listen to various content types while adjusting to ensure a balanced sound across different genres.

How can I enable zone 2 or zone 3 functionality on my Pioneer Elite SC-91 receiver?

To enable zone 2 or zone 3 playback, go to the receiver's setup menu and locate the "Multi-Zone" or "Zone 2/3" settings. Enable the desired zone by selecting it and follow the instructions to set up the audio sources and speaker outputs for each specific zone.

My receiver is not producing any sound. What could be the issue?

Check the following: 1) Ensure the speaker wires are securely connected to the correct terminals on the receiver and speakers. 2) Make sure the volume is turned up to an audible level. 3) Verify that the source you are using is producing audio. 4) Check if the speakers are set to the appropriate channels and not muted. If the issue persists, a factory reset or a professional inspection might be necessary.

Is the manual of the Pioneer Elite SC-91 available in English?

Yes, the manual of the Pioneer Elite SC-91 is available in English .

Is your question not listed? Ask your question here

No results