Name: Pioneer Elite PD-F27
Brand: Pioneer
SKU: 1370194
Rating: 75 (1 reviews)

manualPioneer Elite PD-F27

VARIOUS

OPERATIONS

BASIC

OPERATIONS

BEFORE

OPERATING

Connecting a keyboard

The connection terminal of this unit is designed for a U.S.-English

Keyboard. Take care when using keyboards from other regions as

the keys are different.

Esc F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12

`1234567890-=

~! @#$ %^ ^&( ) _+

QWE RT YU I OP

{}|

AS DFGHJ KL

ZXCVBNM

<>?

[ ]\

,. /

; '

Tab

Ctrl Ctrl

Enter

Backspace

Alt Alt

Shift

Caps Lock

Shift

Inserl Home

Ins Del

End Pg Dn

Home Pg Up

789

456

123

Delete End

Print Scroll

Screen Lock

Pause

Page

Enter

Num

Lock

Page

Down

<U. S. -English keyboard>

E Connecting another PD-F27

With these connections, the audio signals are output from one PD-

F27 (MASTER unit) to the other PD-F27 (SLAVE unit), and the CDs

loaded in the SLAVE unit are numbered from 301 to 600, so the

whole can be operated as a single 602-disc CD changer. Operation

is possible from a single remote control unit.

1 Use an audio cable to connect the SLAVE LINE IN jack on the

MASTER unit (first PD-F27) to the LINE OUT jack on the SLAVE

unit (second PD-F27).

2 Use a control cable to connect the MASTER OUT jack on the

MASTER unit (first PD-F27) to the SLAVE IN jack on the SLAVE

unit (second PD-F27).

Notes:

• Operation of the single loader function on the SLAVE unit can

not be done with the MASTER unit or the remote control unit.

When operating the SLAVE unit’s single loader function, please

use the SLAVE unit.

• When connecting 2 PD-F27 units, connect system remote

control and CD

•

Deck synchro to the MASTER unit only.

• When using 2 connected PD-F27 units, make sure that the

power of both units is ON.

• When not connecting a SLAVE unit, be sure to unplug the cable.

Notes when 2 PD-F27 units are connected

For usage

• Always turn the power of both units on.

• Make Optical digital out connection to both the master unit and slave unit.

• Make CONTROL IN/OUT jack and CD•DECK SYNCHRO connection to the MASTER unit.

For the remote control unit

• SLAVE unit single loader slot operation can not be done with the remote control unit. Operate using the SLAVE

unit.

• The remote control’s DISC (–/+), 1, ¡, 4, ¢, 7, 8, 3 buttons will function for the corresponding unit that is

operating.

For operation

• Operation of a program spanning 2 connected units is not possible.

• When 2 units are connected, disc numbers will be from 1 to 300 on the MASTER unit and from 301 to 600 on the

SLAVE unit. Custom file numbers will be from 1 to 10 on the MASTER unit and from 11 to 20 on the SLAVE unit.

Relay playback (Playback continues on the SLAVE unit after playback has finished on the MASTER unit)

LLA

yalp

ELGNIS

yalp

MOTSUC

yalp

MODNAR

yalp

MARGORP

yalp

TSEB

yalp

SUOIVERP

yalp

ETIL-IH

nacs

LLA

TAEPER

yaleR

kcabyalp

The keyboard connection jack is a six-pin mini DIN-type.

When purchasing a keyboard, make sure that it accepts

this type of connector.

DIN-Connector

1 +KBD DATA

2 Reserved

3 Ground

4 +5.0 Vdc

5 +KBD CLK

6 Reserved

Shield Frame Ground

Power consumption of the keyboard must be 150mA or

less.

View the manual for the Pioneer Elite PD-F27 here, for free. This manual comes under the category CD players and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Pioneer Elite PD-F27 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Pioneer owners to provide you with a good answer.

Number of questions: 0