Name: Pioneer Elite PD-F27
Brand: Pioneer
SKU: 1370194
Rating: 75 (1 reviews)

manualPioneer Elite PD-F27

LINE OUT

CD-DECK

SYNCHRO

OPTICAL COAXIAL

MASTER

CONTROL

MASTER SLAVE

DIGITAL OUT

LINE IN

SLAVE

IN OUT

R L

C D

COAXIALDIGITALOPTICAL INCONTROL OUTCD-DECKSYNCHROLINE OUTCD-DECKSYNCHROOPTICAL COAXIALMASTERCONTROLCONTROLMASTER SLAVEDIGITAL OUTLINE INSLAVESLAVE

IN OUTIN OUT

CONNECTIONS

Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet.

A Making connections

1 Connect the LINE OUT jacks of this unit to the input jacks (CD

or AUX) of the amplifier. Make sure that the white plugs areconnected to the left (L) jacks and the red plugs to the right (R)jacks.• Be sure not to connect this unit to the amplifier’s PHONO jacks,as sound will be distorted and normal playback will not bepossible.

2 Connect the power cord to a household AC wall outlet.

• Make sure plugs are inserted fully into the wall outlet.

Note!!

If you connect the power cord to a “SWITCHED” AC outlet on an

amplifier, you will not be able to use this unit's memory function.

B Connecting to the DIGITAL OUT JACK

This unit can be connected to an amplifier equipped with an opticaldigital jack or coaxial digital jack.

Note!!

No sound may be produced if optical connection are made with anamplifier having different optical signal standard.When using the OPTICAL DIGITAL OUT jack:1. Remove the protective dust cap from this unit’s OPTICAL DIGI-TAL OUT jack.2. Use an optical fiber cable to connect the OPTICAL DIGITAL OUTjack of this unit to the optical input jack of the amplifier.÷ Align the plug of the optical fiber cable with the optical digital jackand fully insert the plug to make a secure connection.Use a separately sold optical fiber cable for the optical digital jackconnections.When using the COAXIAL DIGITAL OUT jack:Use coaxial output cable to connect the COAXIAL DIGITAL OUT jackof this unit to the coaxial digital input jack of the amplifier.

C System remote control with a Pioneer stereo

amplifier that has the Î mark

When a Pioneer stereo amplifier bearing the Î mark is used,connect the CONTROL IN jack on the rear panel of the CD playerto the CONTROL OUT jack of the amplifier. This will enable theCD player to be controlled using the remote control unit suppliedwith the stereo amplifier. If you do not plan to use this feature, it isnot necessary to connect the CONTROL IN/OUT jacks.• The remote control unit supplied with the amplifier can be usedto control Play, Stop, Pause, Track/Disc Search and DiscChange operations.• For instructions regarding connections and operation, refer tothe operating instructions provided with your stereo amplifier.

Note!!

• When a control cable is connected to the player’s CONTROL IN

jack, direct control of the player with the remote control unit is

not possible. Operate the player with the remote control unit by

aiming it at the amplifier.

• Be sure to connect both of the control cable's plugs securely to

the CONTROL IN and CONTROL OUT jacks. Do not connect

only one end of the cable.

• Be sure to turn off the power of the amplifier before connect-

ing the power cord and output cable.

• When only the digital output is connected, the remote sensor

of the amplifier does not function. To operate it, connect the

output cable to the stereo amplifier as well as connecting the

digital output.

D CD•Deck synchro function

If you have a Pioneer cassette deck provided with the CD

•

Deck

synchro function, connect the CD•DECK SYNCHRO jacks of theCD player and cassette deck. With this function, synchrorecording can be carried out between the player and deck.• For details on connections and operation, refer to the operatinginstructions supplied with the cassette deck.• The CD

•

DECK SYNCHRO cable is not supplied with the CDplayer.• When CD

•

Deck synchro recording is carried out on severaldiscs, use the program playback function. (Refer to page 16 fordetails of program playback.)

Note!!

In order to enable the CD

•

DECK SYNCHRO recording function, the

output cable must be connected to the stereo amplifier.

To the CONTROL IN jack ofthe Pioneer componentbearing the Î mark.

Power cord

A-2

Control cable

PD-F27Stereo amplifierOpticalfibercable

A-1

Audio cable

Normal conections When connecting another PD-F27 to create

a 602-disc changer, make the normal

connections, then also make the connec-

tions shown below.

White

Red

Cassette deckStereoamplifierWhiteRedControl cable

E-2

E-1

MASTER

unit

SLAVE unit

•

DECK

SYNCHROcable

Red

White

Coaxial output cable

LINE OUT

CD-DECK

SYNCHRO

MASTER

CONTROL

MASTER SLAVE

LINE IN

SLAVE

IN OUT

LINE OUT

CD-DECK

SYNCHRO

OPTICAL COAXIAL

MASTER

CONTROL

MASTER SLAVE

DIGITAL OUT

LINE IN

SLAVE

IN OUT

LRMASTERCONTROLMASTER SLAVESLAVEIN OUTLINE OUT

LINE OUTCD-DECKSYNCHROMASTERCONTROLCONTROLMASTER SLAVELINE INSLAVESLAVE

IN OUTIN OUTLRLROPTICAL COAXIALDIGITAL OUT

OPTICAL COAXIAL

DIGITAL OUT

View the manual for the Pioneer Elite PD-F27 here, for free. This manual comes under the category CD players and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Pioneer Elite PD-F27 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Pioneer owners to provide you with a good answer.

Number of questions: 0