Pioneer Elite PD-F27 manual

Pioneer Elite PD-F27
7.5 · 1
PDF manual
 · 28 pages
English
manualPioneer Elite PD-F27
24
RENTAL DISC TRACK REMAIN MIN SEC
ALL RANDOM REPEAT - 1 BEST ADLC CUSTOM
SINGLE CD TEXT PREVIOUS SCAN PROGRAM

TROUBLESHOOTING

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the
points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used.
If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER authorized service center or your
dealer to carry out repair work.
Abnormal functioning of this unit may be caused by static electricity, or other external interference. To restore normal operation unplug the AC
power cord and then plug it in again.
Symptom
No sound
When playback is started, it
stops immediately.
Pauses or stops during
playback.
Remote control will not
function.
SLAVE unit does not operate
when 2 units are connected.
Cause
Output cables are connected incorrectly or
loosely.
Incorrect operation of stereo amplifier.
Pin plugs and/or amplifier terminals are dirty.
Player is in pause mode.
The disc is loaded with the label side leftward.
Disc is inserted in the wrong way.
Smudges, etc., on the disc.
Dead batteries.
Obstruction between player and remote control
unit.
Incorrect connection.
Remedy
Connect properly.
Check the settings of amplifier switches and
sound volume controls.
Clean away dirt.
Press 3 or 8.
Reload the disc with the label side rightward.
Insert the disc correctly with the label side
leftward.
Clean the smudges from the disc and then
play it again.
Replace batteries.
Relocate remote control unit or remove
obstruction.
Refer to “Connecting another PD-F27” on
page 6, 7 and reconnect the 2 units.

SELF-DIAGNOSTICS FUNCTION

The unit incorporates the self-diagnostic function.
When an abnormality is detected during operation of the unit, an error message (service No.) appears on the unit‘s display automatically. Treat
the error by following the instructions in ”Countermeasures”.
Display on the unit
Service No.
U1
U2
U3
Unit Status
The disc may not be loaded properly in the rack.
There is an operation error in the mechanical
section.
There is an error related to the hood.
Countermeasures
Reload the discs properly.
(Insert only one disc in a slot.)
Check if there is a foreign object attached onto
the disc.
Check if there is a foreign object in the rack.
Check if there is a foreign object in the rack.
Unplug the power cord then plug it in again.
Check if the hood is caught by anything.
Unplug the power cord then plug it in again.
If the same display appears again, there may be an error in the mechanical section. When requesting servicing, please also let us know the
service number displayed on the unit.
Service No.

View the manual for the Pioneer Elite PD-F27 here, for free. This manual comes under the category CD players and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Pioneer Elite PD-F27 or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Pioneer owners to provide you with a good answer.

Number of questions: 0

General
Pioneer
Elite PD-F27
CD-player
English
User manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer Elite PD-F27 below.

Is your question not listed? Ask your question here

No results