View the manual for the Pioneer DV-400V-S here, for free. This manual comes under the category DVD players and has been rated by 3 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Pioneer DV-400V-S or do you need help? Ask your question here



| Brand | Pioneer |
| Model | DV-400V-S | DV-400V-S |
| Product | DVD player |
| EAN | 4977729856866 |
| Language | English |
| Filetype | User manual (PDF) |
| Video D/A Converter (DAC) | 12-bit/108MHz |
| Video formats supported | DivX, WMV |
| Audio formats supported | MP3, WMA |
| Image formats supported | JPG |
| Playback formats | DivX, WMV, MP3, WMA, JPEG |
| Built-in speaker(s) | No |
| Power requirements | 220 - 240 V, 50/60 Hz |
| Dimensions (WxDxH) | 420 x 215 x 49.5 mm |
| Audio D/A Converter (DAC) | 24-bit/96kHz |
| Signal-to-Noise Ratio (SNR) | 115 dB |
| Total Harmonic Distortion (THD) | 0.0065 % |
| Dynamic range (1kHz) | 88 dB |
| Frequency range | 4 - 44000 Hz |
| Device type | DVD player |
| Product color | Silver |
| Disc types supported | CD |
| Number of optical discs | 1 discs |
| Digital audio coaxial out | 1 |
| Component video (YPbPr/YCbCr) out | 1 |
| SCART ports quantity | 1 |
| USB 2.0 ports quantity | 1 |
| HDMI ports quantity | 1 |
| Handheld remote control | Yes |
| Power consumption (standby) | 0.8 W |
| Power consumption (typical) | 11 W |
| Auto power off | Yes |
| Weight | 1800 g |
| Depth | 215 mm |
| Height | 49.5 mm |
| Width | 420 mm |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer DV-400V-S below.
The Pioneer DV-400V-S has a weight of 1800 g.
A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.
The Pioneer DV-400V-S has a height of 49.5 mm.
The Pioneer DV-400V-S has a width of 420 mm.
The Pioneer DV-400V-S has a depth of 215 mm.
The Pioneer DV-400V-S DVD player supports DivX and WMV video formats.
Yes, the Pioneer DV-400V-S DVD player can play MP3 and WMA audio formats.
The Signal-to-Noise Ratio (SNR) of the Pioneer DV-400V-S DVD player is 115 dB, which indicates high audio clarity and low noise interference for the user.
The Pioneer DV-400V-S DVD player can hold 1 optical disc at a time.
The Pioneer DV-400V-S DVD player has 1 USB 2.0 port, which allows users to connect external devices and enjoy multimedia content conveniently.
To troubleshoot if the Pioneer DV-400V-S DVD player does not turn on, follow these steps: 1. Check the power connection: Ensure that the player is properly plugged into a power outlet and that the power cable is securely connected. 2. Verify the power source: Make sure that the power outlet is functioning correctly by plugging in another device and checking if it powers on. 3. Check the power button: Press the "STANDBY/ON" button on the front panel or the remote control to switch on the player. Ensure that the button is pressed firmly and that the batteries in the remote control are not depleted. 4. Check the TV input: Ensure that your TV is set to the correct input source that you connected the DVD player to. For example, if you connected the player to the "VIDEO 1" inputs on your TV, switch your TV to "VIDEO 1". 5. Screen saver and auto power off: If the player is stopped and no button is pressed for around five minutes, the screen saver may start. If the disc tray is closed but no disc is playing and no control is pressed for about 30 minutes, the player automatically goes into standby mode. By following these steps, you can troubleshoot and resolve issues with the Pioneer DV-400V-S DVD player not turning on.
To troubleshoot if the disc tray does not open or close on the Pioneer DV-400V-S DVD player, follow these steps: 1. Check the power connection: Ensure that the player is properly plugged into a power outlet and that the power cable is securely connected. 2. Press the "OPEN/CLOSE" button: Press the "OPEN/CLOSE" button on the front panel or the remote control to manually open or close the disc tray. Make sure that the button is pressed firmly and that there are no obstructions blocking the tray. 3. Check for disc compatibility: Ensure that you are using a compatible disc format. The Pioneer DV-400V-S DVD player supports various disc formats such as DVD-Video, DVD-Audio, DVD-R/-RW, DivX video/WMV, Video CD/Super VCD, and JPEG picture discs. Make sure the disc is inserted correctly with the label side facing up. 4. Reset the player: If the disc tray still does not open or close, try resetting the player. Disconnect the power cord from the outlet, wait for a few minutes, and then reconnect it. Press the "STANDBY/ON" button to turn on the player and try opening or closing the disc tray again. 5. Contact customer support: If the issue persists, it is recommended to contact Pioneer customer support or a qualified technician for further assistance. By following these steps, you can troubleshoot and resolve issues with the disc tray not opening or closing on the Pioneer DV-400V-S DVD player.
To troubleshoot if the Pioneer DV-400V-S DVD player does not play a DVD-Video disc, follow these steps: 1. Check the disc compatibility: Ensure that the DVD-Video disc you are trying to play is compatible with the Pioneer DV-400V-S DVD player. Verify that the disc format is supported by the player, such as DVD-R/-RW or DVD+R/+RW. Also, check if the disc is clean and free from scratches or damage. 2. Check the disc loading: Make sure that you have inserted the DVD-Video disc correctly into the disc tray with the label side facing up. Ensure that the disc is seated properly and that the disc tray is closed securely. 3. Reset the player: If the DVD-Video disc still does not play, try resetting the player. Disconnect the power cord from the outlet, wait for a few minutes, and then reconnect it. Press the "STANDBY/ON" button to turn on the player and try playing the disc again. 4. Update the firmware: If the issue persists, check if there is a firmware update available for the Pioneer DV-400V-S DVD player. Visit the Pioneer website and follow the instructions to download and install any available firmware updates. 5. Contact customer support: If the problem continues, it is recommended to contact Pioneer customer support or a qualified technician for further assistance. By following these steps, you can troubleshoot and resolve issues with the Pioneer DV-400V-S DVD player not playing a DVD-Video disc.
To troubleshoot if the Pioneer DV-400V-S DVD player does not play a DivX video or WMV file, follow these steps: 1. Check the file format: Ensure that the DivX video or WMV file you are trying to play is in a compatible format. The Pioneer DV-400V-S DVD player supports DivX video files with the extensions .avi and .divx. For WMV files, make sure they are encoded using the Windows Media Encoder 9 Series and have the .wmv extension. 2. Verify the file resolution: Check that the resolution of the DivX video or WMV file is within the supported range of the player. The Pioneer DV-400V-S DVD player is compatible with sizes under 720 x 576 pixels for PAL format or 720 x 480 pixels for NTSC format. 3. Check for advanced profile support: Note that the Pioneer DV-400V-S DVD player does not support the Advanced Profile for WMV files. Ensure that the WMV file you are trying to play is encoded using the Windows Media Encoder 9 Series without the Advanced Profile. 4. Check for DRM protection: DRM-protected video files will not play on the Pioneer DV-400V-S DVD player. Make sure that the DivX video or WMV file you are trying to play is not DRM-protected. If the issue persists, it is recommended to contact Pioneer customer support or a qualified technician for further assistance. By following these steps, you can troubleshoot and resolve issues with playing DivX video or WMV files on the Pioneer DV-400V-S DVD player.
To troubleshoot if the Pioneer DV-400V-S DVD player does not display the PBC menu on a Video CD or Super VCD disc, follow these steps: 1. Check the disc compatibility: Ensure that the Video CD or Super VCD disc you are trying to play is compatible with the Pioneer DV-400V-S DVD player. Verify that the disc format is supported by the player. 2. Enable PBC mode: Press the "SETUP" button on the remote control to access the setup menu. Navigate to the "Playback" or "Video" settings and look for an option to enable the Playback Control (PBC) mode. Make sure the PBC mode is turned on. 3. Restart the disc: If the PBC menu still does not appear, stop the playback of the disc and eject it from the player. Wait for a few seconds, then reinsert the disc and try playing it again. Sometimes, restarting the disc can resolve issues with the PBC menu not displaying. 4. Check for disc errors: Inspect the Video CD or Super VCD disc for any visible scratches, smudges, or dirt. Clean the disc using a soft, lint-free cloth and try playing it again. If the disc is severely damaged, it may not display the PBC menu properly. 5. Contact customer support: If the problem persists, it is recommended to contact Pioneer customer support or a qualified technician for further assistance. By following these steps, you can troubleshoot and resolve issues with the Pioneer DV-400V-S DVD player not displaying the PBC menu on a Video CD or Super VCD disc.
To troubleshoot if the Pioneer DV-400V-S DVD player does not play a JPEG picture disc or does not navigate through the slideshow, follow these steps: 1. Check the disc compatibility: Ensure that the JPEG picture disc you are trying to play is compatible with the Pioneer DV-400V-S DVD player. Verify that the disc format is supported by the player. 2. Verify the file format: Make sure that the JPEG files on the disc are in a compatible format. The Pioneer DV-400V-S DVD player supports JPEG files with the extension .jpg or .jpeg. 3. Check the disc loading: Ensure that you have inserted the JPEG picture disc correctly into the disc tray with the label side facing up. Make sure the disc is seated properly and that the disc tray is closed securely. 4. Start the slideshow: Once the disc is loaded, press the "PHOTO" or "SLIDESHOW" button on the remote control to start the slideshow. Use the navigation buttons to move between the pictures and navigate through the slideshow. 5. Adjust slideshow settings: If the slideshow does not navigate as expected, check the settings for the slideshow. Press the "SETUP" button on the remote control to access the setup menu. Navigate to the "Photo" or "Slideshow" settings and adjust the settings as desired. If the issue persists, it is recommended to contact Pioneer customer support or a qualified technician for further assistance. By following these steps, you can troubleshoot and resolve issues with playing a JPEG picture disc and navigating through the slideshow on the Pioneer DV-400V-S DVD player.
Yes, the manual of the Pioneer DV-400V-S is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Pioneer and is the answer not in the manual?
Question and answer
Number of questions: 0