Pioneer DV-400V-K manual

Pioneer DV-400V-K
9.7 · 1
PDF manual
 · 127 pages
English
manualPioneer DV-400V-K

View the manual for the Pioneer DV-400V-K here, for free. This manual comes under the category DVD players and has been rated by 1 people with an average of a 9.7. This manual is available in the following languages: English. Do you have a question about the Pioneer DV-400V-K or do you need help? Ask your question here

Need help?

Do you have a question about the Pioneer and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandPioneer
ModelDV-400V-K | DV-400V-K
ProductDVD player
EAN4977729856811
LanguageEnglish
FiletypeUser manual (PDF)
File formats
Video formats supportedDivX, WMV
Image formats supportedJPG
Audio formats supportedMP3, WMA
Technical details
Device typeDVD player
Product colorBlack
Storage
Disc types supportedCD
Number of optical discs1 discs
Video
Video D/A Converter (DAC)12-bit/108MHz
Other features
Playback formatsDivX, WMV, MP3, WMA, JPEG
Built-in speaker(s)No
Power requirements220 - 240V, 50/60 Hz
Dimensions (WxDxH)420 x 215 x 49.5 mm
Audio
Audio D/A Converter (DAC)24-bit/96kHz
Signal-to-Noise Ratio (SNR)115 dB
Total Harmonic Distortion (THD)0.0065 %
Dynamic range (1kHz)88 dB
Frequency range4 - 44000 Hz
Ports & interfaces
Digital audio coaxial out1
Component video (YPbPr/YCbCr) out1
SCART ports quantity1
USB 2.0 ports quantity1
HDMI ports quantity1
Packaging content
Handheld remote controlYes
Power
Power consumption (standby)0.8 W
Power consumption (typical)11 W
Auto power offYes
Weight & dimensions
Weight1800 g
Depth215 mm
Height49.5 mm
Width420 mm
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer DV-400V-K below.

What is the weight of the Pioneer DV-400V-K?

The Pioneer DV-400V-K has a weight of 1800 g.

How can I best clean my DVD player?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

What is the height of the Pioneer DV-400V-K?

The Pioneer DV-400V-K has a height of 49.5 mm.

What is the width of the Pioneer DV-400V-K?

The Pioneer DV-400V-K has a width of 420 mm.

What is the depth of the Pioneer DV-400V-K?

The Pioneer DV-400V-K has a depth of 215 mm.

Does the Pioneer DV-400V-K support DivX and WMV video formats?

Yes, the Pioneer DV-400V-K supports DivX and WMV video formats. This means that users can enjoy a wide range of video content in these formats.

Can the Pioneer DV-400V-K play MP3 and WMA audio formats?

Yes, the Pioneer DV-400V-K can play MP3 and WMA audio formats. Users can enjoy their favorite music in these popular formats.

What is the Signal-to-Noise Ratio (SNR) of the Pioneer DV-400V-K?

The Signal-to-Noise Ratio (SNR) of the Pioneer DV-400V-K is 115 dB. This high SNR ensures clear and high-quality audio playback for the user.

How many USB 2.0 ports does the Pioneer DV-400V-K have?

The Pioneer DV-400V-K has one USB 2.0 port. Users can conveniently connect their USB devices to the DVD player to access and play media files.

Does the Pioneer DV-400V-K have built-in speakers?

No, the Pioneer DV-400V-K does not have built-in speakers. However, users can connect external speakers or audio devices for an enhanced audio experience.

How do I troubleshoot if the Pioneer DV-400V-K DVD player does not turn on or respond to the power button?

To troubleshoot if the Pioneer DV-400V-K DVD player does not turn on or respond to the power button, follow these steps: 1. Check the power connection: Ensure that the player is properly plugged into a power outlet and that the power cord is securely connected. 2. Verify the power source: Make sure that the power outlet is functioning correctly by plugging in another device or using a different outlet. 3. Check the power button: Ensure that you are pressing the correct power button on the front panel or remote control. Sometimes, the power button may be labeled as "STANDBY/ON." 4. Replace the batteries: If you are using the remote control, check if the batteries are exhausted. Replace them with new ones if necessary. 5. Reset the player: If the player is unresponsive, try resetting it by turning it off using the power button and unplugging the power cord. Wait for a few minutes, then plug it back in and turn it on again. If the issue persists after following these steps, it is recommended to contact Pioneer customer support for further assistance.

What should I do if the Pioneer DV-400V-K DVD player does not recognize or play a DVD, CD, SACD, Video CD/Super VCD, DivX video/WMV, or MP3/WMA/MPEG-4 AAC disc?

To troubleshoot if the Pioneer DV-400V-K DVD player does not recognize or play a disc, follow these steps: 1. Check the disc format: Ensure that the disc you are trying to play is compatible with the Pioneer DV-400V-K DVD player. Refer to the manual for a list of supported disc formats. 2. Clean the disc: Inspect the disc for any visible dirt, smudges, or scratches. Clean the disc using a soft, lint-free cloth, wiping from the center to the outer edge in a straight line. 3. Try a different disc: Test the player with a different DVD, CD, SACD, Video CD/Super VCD, DivX video/WMV, or MP3/WMA/MPEG-4 AAC disc to determine if the issue is specific to the disc or the player. 4. Update the firmware: Check if there is a firmware update available for the Pioneer DV-400V-K DVD player. Visit the Pioneer website and follow the instructions to download and install the latest firmware version. 5. Reset the player: If the player still does not recognize or play the disc, try resetting the player to its factory settings. Refer to the manual for instructions on how to perform a factory reset. If the issue persists after following these steps, it is recommended to contact Pioneer customer support for further assistance.

How can I troubleshoot if the Pioneer DV-400V-K DVD player freezes or becomes unresponsive during playback?

To troubleshoot if the Pioneer DV-400V-K DVD player freezes or becomes unresponsive during playback, follow these steps: 1. Check the disc: Ensure that the disc you are playing is clean and free from scratches or damage. Clean the disc using a soft, lint-free cloth, wiping from the center to the outer edge. 2. Update the firmware: Visit the Pioneer website and check if there is a firmware update available for the DV-400V-K DVD player. Follow the instructions provided to download and install the latest firmware version. 3. Check the connections: Ensure that all cables, including the HDMI or AV cables, are securely connected to both the DVD player and the TV or audio receiver. Try using different cables or ports if available. 4. Reset the player: Turn off the DVD player and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on again. This will reset the player and may resolve any temporary issues. 5. Contact customer support: If the issue persists, it is recommended to contact Pioneer customer support for further assistance. They can provide specific troubleshooting steps or arrange for repairs if necessary. Note: Always refer to the Pioneer DV-400V-K DVD player manual for additional troubleshooting steps and information.

What should I do if the Pioneer DV-400V-K DVD player does not display the DVD-Video or DivX disc menus properly?

To troubleshoot if the Pioneer DV-400V-K DVD player does not display the DVD-Video or DivX disc menus properly, follow these steps: 1. Check the disc compatibility: Ensure that the disc you are trying to play is compatible with the Pioneer DV-400V-K DVD player. Refer to the disc packaging or the manual for a list of supported disc formats. 2. Clean the disc: Inspect the disc for any visible dirt, smudges, or scratches. Clean the disc using a soft, lint-free cloth, wiping from the center to the outer edge. 3. Press the MENU or TOP MENU button: Some DVD-Video and DivX discs require you to manually activate the disc menu. Press the MENU or TOP MENU button on the remote control to access the menu options. 4. Navigate the menu: Once the disc menu is displayed, use the arrow buttons on the remote control to navigate through the menu options. Press the ENTER button to select an option. 5. Reset the player: If the disc menus still do not display properly, try resetting the Pioneer DV-400V-K DVD player. Turn off the player, unplug it from the power source, wait for a few minutes, then plug it back in and turn it on again. If the issue persists after following these steps, it is recommended to contact Pioneer customer support for further assistance.

How can I troubleshoot if the Pioneer DV-400V-K DVD player does not navigate or play Video CD/Super VCD PBC menus correctly?

To troubleshoot if the Pioneer DV-400V-K DVD player does not navigate or play Video CD/Super VCD PBC menus correctly, follow these steps: 1. Check disc compatibility: Ensure that the Video CD/Super VCD you are trying to play is compatible with the Pioneer DV-400V-K DVD player. Refer to the disc packaging or the manual for a list of supported disc formats. 2. Activate PBC mode: Some Video CD/Super VCDs have PBC (Playback Control) menus that allow you to navigate and select different options. Press the RETURN button on the remote control to display the PBC menu. 3. Navigate the PBC menu: Once the PBC menu is displayed, use the arrow buttons on the remote control to navigate through the menu options. Press the ENTER button to select an option. 4. Use number buttons: If the PBC menu does not function properly, you can try using the number buttons on the remote control to directly select a track or option. Enter the corresponding number and press the ENTER button. 5. Reset the player: If the issue persists, try resetting the Pioneer DV-400V-K DVD player. Turn off the player, unplug it from the power source, wait for a few minutes, then plug it back in and turn it on again. If the problem continues, it is recommended to contact Pioneer customer support for further assistance.

What should I do if the Pioneer DV-400V-K DVD player does not play a JPEG picture disc or does not display the images in a slideshow?

To troubleshoot if the Pioneer DV-400V-K DVD player does not play a JPEG picture disc or does not display the images in a slideshow, follow these steps: 1. Check disc compatibility: Ensure that the JPEG picture disc you are trying to play is compatible with the Pioneer DV-400V-K DVD player. Refer to the disc packaging or the manual for a list of supported disc formats. 2. Verify file format: Confirm that the JPEG images on the disc are in a supported file format, such as JPEG or JPG. If the images are in a different format, you may need to convert them to JPEG before playing them on the DVD player. 3. Check file size and resolution: Ensure that the JPEG images meet the requirements of the DVD player. Large file sizes or high-resolution images may not be supported. Try reducing the file size or resolution of the images and see if they can be played. 4. Navigate to the JPEG folder: If the disc contains multiple folders, navigate to the folder that contains the JPEG images using the on-screen menu or the remote control. 5. Start the slideshow: Once you are in the JPEG folder, select the option to start the slideshow. The DVD player should automatically display the images in a slideshow format. If the issue persists after following these steps, it is recommended to contact Pioneer customer support for further assistance.

Is the manual of the Pioneer DV-400V-K available in English?

Yes, the manual of the Pioneer DV-400V-K is available in English .

Is your question not listed? Ask your question here

No results