View the manual for the Pioneer DM-40BT here, for free. This manual comes under the category speakers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Pioneer DM-40BT or do you need help? Ask your question here




The Pioneer DM-40BT is a speaker designed for recommended usage in DJ settings. It features a bass reflex design and includes a woofer with a diameter of 4 inches. The speaker also incorporates a tweeter with a diameter of 0.75 inches. The amplifier class of the Pioneer DM-40BT is classified as A/B, which suggests a combination of both Class A and Class B amplification. This type of amplifier offers a good balance between efficiency and audio quality. With its bass reflex design, the Pioneer DM-40BT aims to enhance the low-frequency response by using a port or vent to allow the flow of air. This helps to produce deeper and richer bass tones, providing an enhanced audio experience for DJs. The woofer, with a diameter of 4 inches, is responsible for reproducing the low-frequency sounds. This compact size allows the speaker to fit into various setups while still delivering powerful and punchy bass. The tweeter, with a diameter of 0.75 inches, is designed to reproduce the high-frequency sounds with clarity and precision. It complements the woofer by providing crisp and detailed treble, ensuring a well-balanced sound output. Overall, the Pioneer DM-40BT is a speaker that offers a combination of a bass reflex design, a 4-inch woofer, and a 0.75-inch tweeter. Its A/B amplifier class ensures a good balance between efficiency and audio quality. This speaker is suitable for DJ applications, aiming to provide deep bass and clear, detailed high-frequency reproduction.
| Brand | Pioneer |
| Model | DM-40BT | DM-40BT |
| Product | speaker |
| EAN | 4573201241030 |
| Language | English |
| Filetype | User manual (PDF) |
| Recommended usage | DJ |
| Bass reflex | Yes |
| Recommended usage | DJ |
| Audio output channels | - channels |
| On/off switch | Yes |
| Product color | Black |
| Housing material | MDF |
| Speaker type | 2-way |
| Audio output channels | - channels |
| Woofer | Yes |
| Woofer diameter (imperial) | 4 " |
| Tweeter | Yes |
| Tweeter diameter (imperial) | 0.75 " |
| Speaker placement | Tabletop/bookshelf |
| Amplifier | Built-in |
| Amplifier class | A/B |
| Amplifier class | A/B |
| Amplifier output power | 42 W |
| Bass reflex | Yes |
| Tweeter | Yes |
| Cables included | AC, RCA |
| Manual | Yes |
| Width | 146 mm |
| Depth | 223 mm |
| Height | 227 mm |
| Weight | 2700 g |
| Speaker width | 146 mm |
| Speaker depth | 210 mm |
| Speaker height | 227 mm |
| Speaker weight | 2200 g |
| Number of amplifier channels | 2 channels |
| Amplifier/receiver input interface type | RCA, Terminals |
| Amplifier/receiver output interface type | Terminals |
| Frequency range | 70 - 30000 Hz |
| Impedance | 10000 Ω |
| RMS rated power | - W |
| Headphone outputs | 1 |
| Connectivity technology | Wired & Wireless |
| Bluetooth version | 4.2 |
| AC (power) in | Yes |
| Bluetooth | Yes |
| 3.5 mm connector | Yes |
| Power source type | AC |
| AC input voltage | 110 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 35 W |
| Power consumption (standby) | 0.3 W |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer DM-40BT below.
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.
Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
The Pioneer DM-40BT has a weight of 2700 g.
The Pioneer DM-40BT has a height of 227 mm.
The Pioneer DM-40BT has a width of 146 mm.
The Pioneer DM-40BT has a depth of 223 mm.
Yes, the Pioneer DM-40BT is recommended for DJ usage, making it a great choice for those in the music industry looking for a high-quality speaker.
Yes, the Pioneer DM-40BT has a bass reflex feature, which means it delivers deep and powerful bass for an immersive audio experience.
The height of the Pioneer DM-40BT speaker is 227 mm, making it a compact and convenient size for easy placement in any room.
The amplifier of the Pioneer DM-40BT has an output power of 42 W, which is relatively high and ensures a loud and clear sound.
The amplifier of the Pioneer DM-40BT has 2 channels, providing stereo sound for a more immersive listening experience compared to single-channel speakers.
To troubleshoot if the power is not turning on for the Pioneer DM-40BT speaker, follow these steps: 1. Check the power cord: Ensure that the power cord is properly connected to an AC outlet. If it is not plugged in, plug it in securely. 2. Verify device settings: Make sure that the connected device is set properly. Check the external input and volume settings on the device. Adjust them as needed. 3. Confirm power switch: Turn on the power switch located on the rear panel of the speaker. Ensure that it is in the "on" position. 4. Check standby state: If the POWER indicator (white) does not light up, check if the speakers are in the standby state. Turn off the power switch on the rear panel of the speaker and then turn it back on after a few seconds. Alternatively, press the pairing button on the front panel of the speaker. 5. Increase input signal level: If the speaker does not recover from the standby state, increase the input signal level. This can help restore normal operation. If these troubleshooting steps do not resolve the issue, it is recommended to contact your nearest Pioneer authorized service center or dealer for further assistance with repair work.
If there is no sound output from the Pioneer DM-40BT speaker, you can follow these steps to troubleshoot the issue: 1. Check the power connection: Ensure that the power cord is properly connected to an AC outlet. 2. Verify the device settings: Make sure that the connected device is set properly. Adjust the external input and volume settings on the device. 3. Adjust the speaker volume: Turn the [LEVEL] control on the front panel of the speaker clockwise to increase the volume. 4. Check the power switch: Ensure that the [POWER] switch on the rear panel of the speaker is turned on. 5. Check the standby state: If the speakers are in the standby state, turn off the [POWER] switch on the rear panel and then turn it back on after a few seconds. Alternatively, press the pairing button on the front panel of the speaker. 6. Increase the input signal level: If the sound is distorted, increase the input signal level. 7. Check the speaker connections: Make sure that the speaker cords are properly connected to the speaker. Connect the left and right speakers correctly. 8. Reset the speaker: If the speaker does not recover from the standby state, input a signal from the RCA or stereo mini plug input terminal. Alternatively, press the pairing button on the front panel of the speaker. 9. Check the connection cables: If the sound is not output from the connected device or if there is low sound, ensure that the connection cables are properly connected. Clean the terminals and plugs before making connections. 10. Check for electromagnetic interference: If you are using Bluetooth, ensure that there are no devices producing electromagnetic waves in the 2.4 GHz band nearby. Move the speaker and the connected Bluetooth device closer to each other or change their positions. 11. Check the Bluetooth device compatibility: Make sure that the Bluetooth device you are trying to connect supports A2DP. By following these steps, you should be able to troubleshoot and resolve the issue of no sound output from the Pioneer DM-40BT speaker.
To fix distorted sound issues with the Pioneer DM-40BT speaker, follow these steps: 1. Check the volume level: Turn the [LEVEL] control on the front panel of the speaker counterclockwise to reduce the volume. Adjust the output level of the connected device properly. 2. Ensure proper connections: Make sure the speaker cord is securely connected to the speaker terminals on both the left and right sides. Connect the speaker cord with the red line into the + terminal side (red) and the speaker cord without the red line into the – terminal side (black). After connecting, lightly pull the speaker cord to ensure a secure connection. 3. Check for interference: Keep the speaker away from devices producing electromagnetic waves in the 2.4 GHz band, such as microwave ovens, wireless LAN devices, or other Bluetooth devices. Also, ensure that there are no walls or obstacles blocking the Bluetooth signal between the speaker and the connected device. 4. Clean connections: If there is a contact problem with the connection cables, reconnect them. Also, clean the terminals and plugs before making connections to ensure a proper connection. If the issue persists after following these steps, it is recommended to contact your nearest Pioneer authorized service center or dealer for further assistance.
Yes, the manual of the Pioneer DM-40BT is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Pioneer and is the answer not in the manual?
Question and answer
Number of questions: 0