View the manual for the Pioneer DJM-S5 here, for free. This manual comes under the category DJ gear and has been rated by 1 people with an average of a 7.3. This manual is available in the following languages: English. Do you have a question about the Pioneer DJM-S5 or do you need help? Ask your question here




The Pioneer DJM-S5 is a 2-channel mixer that offers an array of features for DJs. With its mixer section, DJs can seamlessly blend and mix their tracks. The mixer also features backlight buttons, making it easy to locate and use the various controls, even in low-light environments. One notable feature of the DJM-S5 is its Digital Vinyl System (DVS) scratcher type, which allows DJs to incorporate scratching techniques using vinyl records and control vinyl. This opens up a wide range of creative possibilities for DJs. In terms of audio formats supported, the DJM-S5 can handle AAC, AIFF, MP3, and WAV files, allowing DJs to play music in various formats. Additionally, the mixer offers automatic beat matching, making it easier for DJs to synchronize tracks and maintain a consistent tempo throughout their performances. The DJM-S5 boasts a high Signal-to-Noise Ratio (SNR) of 108 dB, ensuring that the audio output is clean and free from unwanted noise. While it does not have a built-in optical drive, DJs can still play music directly from a USB device thanks to its USB direct playback feature. The sample rate of the DJM-S5 is 48 kHz, providing high-quality audio reproduction. Additionally, the mixer supports a bit rate of 24 bit, further enhancing the clarity and definition of the sound. With its microphone input, the DJM-S5 allows DJs to add vocals or make announcements during their performances. However, it does not have a built-in display. Overall, the Pioneer DJM-S5 is a versatile and feature-packed mixer that offers DJs a reliable and durable tool for their creative endeavors.
| Brand | Pioneer |
| Model | DJM-S5 | DJM-S5 |
| Product | DJ gear |
| EAN | 0841300102274 |
| Language | English |
| Filetype | User manual (PDF), Quickstart Guide (PDF) |
| Product color | Black, Red |
| Mixer section | Yes |
| Backlight buttons | Yes |
| Scratcher type | Digital Vinyl System (DVS) scratcher |
| Audio formats supported | AAC, AIFF, MP3, WAV |
| Automatic beat matching | Yes |
| Signal-to-Noise Ratio (SNR) | 108 dB |
| Built-in optical drive | No |
| USB direct playback | Yes |
| Sample rate | 48 kHz |
| Bit rate | 24 bit |
| Number of mixer channels | 2 channels |
| Automatic beat alignment | Yes |
| Product color | Black, Red |
| USB connector type | USB Type-C |
| USB port | Yes |
| Apple docking | - |
| DJ mixer | Yes |
| Rack mounting | - |
| Video capability | No |
| Built-in display | No |
| Built-in display | No |
| Microphone in | Yes |
| MIDI out | Yes |
| USB connector type | USB Type-C |
| XLR out | 1 |
| XLR in | Yes |
| Booth (L, R) out | Yes |
| USB port | Yes |
| Apple docking | - |
| Microphone in | Yes |
| MIDI out | Yes |
| XLR out | 1 |
| XLR in | Yes |
| Width | 728.2 mm |
| Depth | 411.9 mm |
| Height | 104.2 mm |
| Weight | 8000 g |
| Width | 245 mm |
| Depth | 363.5 mm |
| Height | 107.9 mm |
| Weight | 3400 g |
| Power supply type | AC |
| Power consumption (typical) | - W |
| Bundled software | rekordbox |
| Sample rate | 48 kHz |
| Channels quantity | - channels |
| Supported sample rates | 48 kHz |
| Digital sound processing | 24 bit |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Pioneer DJM-S5 below.
The Pioneer DJM-S5 has a weight of 3400 g.
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
The Pioneer DJM-S5 has a height of 107.9 mm.
The Pioneer DJM-S5 has a width of 245 mm.
The Pioneer DJM-S5 has a depth of 363.5 mm.
The Pioneer DJM-S5 has a USB Type-C connection.
Yes, the Pioneer DJM-S5 has a mixer section. This means that users can control the audio levels and mix multiple audio sources together.
Yes, the Pioneer DJM-S5 has backlight buttons. This feature allows users to easily see and operate the mixer even in low-light environments.
The Pioneer DJM-S5 has a Digital Vinyl System (DVS) scratcher. This means that users can use specially coded vinyl records or CDs to control the scratching effects on the mixer.
The Pioneer DJM-S5 supports AAC, AIFF, MP3, and WAV audio formats. This versatility allows users to play various audio files without any compatibility issues.
Yes, the Pioneer DJM-S5 has automatic beat matching. This feature analyzes the tracks being played and automatically adjusts the tempo to match, making it easier for DJs to create seamless transitions between songs.
To switch between user modes on the Pioneer DJM-S5, follow these steps: 1. Press and hold the [MODE] button and the [SHIFT] button simultaneously. 2. While holding the [MODE] and [SHIFT] buttons, press one of the Performance Pads (1, 2, 3, or 4) twice. - Pressing Performance Pad 1 will switch to User mode 1. - Pressing Performance Pad 2 will switch to User mode 2. - Pressing Performance Pad 3 will switch to User mode 3. - Pressing Performance Pad 4 will switch to User mode 4. Once you have selected the desired User mode, you can assign functions to the Performance Pads for that mode. To assign functions, follow these additional steps: 1. Launch the Serato DJ Pro software on your computer. 2. Click on the [MIDI] button on the Serato DJ Pro screen. - This will switch Serato DJ Pro to MIDI assigning mode. 3. Click on the function you want to assign to a Performance Pad on the Pioneer DJM-S5. By following these steps, you can easily switch between user modes on the Pioneer DJM-S5 and assign functions to the Performance Pads for each mode.
If the fader start is not working on your Pioneer DJM-S5, you can try the following steps to troubleshoot the issue: 1. Check the Fader Start settings: Ensure that the "Fader Start" function is enabled in the settings. You can do this by accessing the "Preference" tab in the Setting Utility and marking the checkbox for "Fader Start options". 2. Verify the cue point: Make sure that a cue point is properly set for the track you are trying to use with the fader start. Refer to the user manual of your DJ software for instructions on how to set a cue point. 3. Use the channel fader start: If the track is paused, you can initiate the fader start by moving the channel fader from the bottom position while pressing the [SHIFT] button. The playback will start from the cue point. 4. Check for back cue functionality: During playback, you can quickly return to the cue point and pause playback by moving the channel fader back to the bottom position while pressing the [SHIFT] button. This is known as the "Back Cue" function. 5. Sync function settings: If you are using Serato DJ Pro, you can set whether the sync function will turn on when the channel fader start is triggered. This setting can be adjusted in the "Preference" tab of the Setting Utility. By following these steps, you can troubleshoot and resolve issues with the fader start functionality on your Pioneer DJM-S5.
To enable and use the fader start feature on the Pioneer DJM-S5, follow these steps: 1. Connect your Pioneer DJM-S5 to your computer and launch your DJ software (e.g., Serato DJ Pro). 2. Access the "Preference" or "Settings" menu in your DJ software. 3. Locate the "MIDI" or "Controller" settings within the preferences. 4. Look for the option to enable the fader start feature. It may be labeled as "Fader Start" or "Fader Start options". 5. Enable the fader start feature by checking the corresponding box or selecting the appropriate option. 6. Once the fader start feature is enabled, you can use it by moving the channel fader from the bottom position while pressing the [SHIFT] button. This will start the playback of the track from the cue point. 7. To quickly return to the cue point and pause playback, move the channel fader back to the bottom position while pressing the [SHIFT] button. This is known as the "Back Cue" function. By following these steps, you can enable and use the fader start feature on the Pioneer DJM-S5 to seamlessly control the playback of your tracks.
If the crossfader hot cues are not triggering on your Pioneer DJM-S5, you can try the following steps to troubleshoot the issue: 1. Check the Crossfader Hot Cue settings: Press the [FX1/CUT4] button while pressing the [SHIFT] button to turn on or off the Crossfader Hot Cue function. If the [FX1/CUT4] button blinks when the [SHIFT] button is pressed, Crossfader Hot Cue is on. If the [FX1/CUT4] button light is off when the [SHIFT] button is pressed, Crossfader Hot Cue is off. 2. Set a Hot Cue point: Make sure you have set a Hot Cue point for the track you want to use with the crossfader hot cues. Refer to page 47 of the manual for instructions on how to set a Hot Cue point. 3. Press the Performance Pad: Press one of the Performance Pads that have a Hot Cue set for the track. 4. Set the crossfader position: Set the crossfader all the way to the left side or right side, depending on the deck that triggers the Crossfader Hot Cue. For example, moving the crossfader from the left end to the other side triggers Hot Cue on Deck 2, and vice versa. 5. Move the crossfader away: Move the crossfader away from the left or right side to activate the Crossfader Hot Cue. Playback will start from the last triggered Hot Cue point. Note: To use Crossfader Hot Cue, the track loaded on the opposite deck must have a Hot Cue set. Additionally, there may be a certain period of time after playback starts from the Hot Cue point where performing the same procedure won't restart playback from the Hot Cue point. You can adjust this time period in the Utility settings (page 67). By following these steps, you can troubleshoot and ensure that the crossfader hot cues are properly triggering on your Pioneer DJM-S5.
To set up and use the crossfader hot cue feature on the Pioneer DJM-S5, follow these steps: 1. Set a Hot Cue point: While playing a track, press one of the Performance Pads (1-8) to set a Hot Cue point at the desired position in the track. 2. Enable the Crossfader Hot Cue function: Press the [FX1/CUT4] button while pressing the [SHIFT] button to turn on the Crossfader Hot Cue function. The [FX1/CUT4] button will blink to indicate that Crossfader Hot Cue is enabled. 3. Assign Hot Cues to the crossfader: Move the crossfader to the left or right side to select the deck that will trigger the Hot Cue. For example, moving the crossfader to the left side will assign Hot Cues to Deck 1, and moving it to the right side will assign Hot Cues to Deck 2. 4. Trigger the Hot Cue: Move the crossfader away from the assigned side to activate the Hot Cue. The track will start playing from the last triggered Hot Cue point. 5. Repeat the process: Set additional Hot Cue points on different Performance Pads and assign them to the crossfader for more creative mixing possibilities. By following these steps, you can easily set up and use the crossfader hot cue feature on the Pioneer DJM-S5 to enhance your DJ performance and create dynamic transitions between tracks.
Yes, the manual of the Pioneer DJM-S5 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Pioneer and is the answer not in the manual?
Question and answer
Number of questions: 0